Husqvarna 123HD60 инструкция обслуживания

E E E E n n n n g g g g l l l l i i i i s s s s h h h h 123HD60 Oper ator ′ s manual Please r ead the operator’ s manual carefull y and make sur e you understand the instructions before using the machine.[...]

2 – English KEY T O SYMBOLS Symbols W ARNING! Incorrect or careless use of a hedge trimmer can tur n it into a dangerous tool that can cause serious or ev en f atal injur y . It is extremely important that you read and understand the contents of this operator’ s manual. Please read the operator’ s manual carefully and make sure y ou understan[...]

English – 3 CONTENTS Contents Note the f ollowing bef ore star ting: Please read the oper ator’ s manual carefully . Long-term exposure to noise can result in permanent hear ing impairment. So alwa ys use approved hearing protection. KEY T O SYMBOLS Symbols ....................................................................... 2 CONTENTS Conte[...]

4 – English INTR ODUCTION Dear Customer , Cong ratulations on y our choice to buy a Husqv arna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Charles XI ordered the construction of a factory on the banks of the Husqvarna River , for production of musk ets. T he location was logical, since w ater power w [...]

English – 5 WHA T IS WHA T? What is what? 1 13 2 12 5 8 7 4 22 11 6 10 3 16 14 9 18 19 21 20 17 15 1 Operator ′ s manual 2 Handle 3 Throttle lock 4 Fuel cap 5 Choke control 6 F ront handle 7 Blade guard 8 Blades 9 T ransport guard 10 Air filter cov er . 11 Air purge 12 Fuel tank 13 Throttle control 14 Spark plug cap and spar k plug 15 Cylinder[...]

6 – English GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HEARING PR O TECTION W ear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approved e ye protection. If you use a visor then you m ust also wear approv ed protective goggles. Approv ed protective goggles m ust comply with sta[...]

English – 7 GENERAL SAFETY PRECA UTIONS Mac hine ′′ ′ ′ s safety equipment This section descr ibes the machine ′ s saf ety equipment, its pur pose, and ho w checks and maintenance should be carried out to ensure that it operates correctly . See the ”What is what?” section to locate where this equipment is positioned on your machine [...]

8 – English GENERAL SAFETY PRECA UTIONS Hand guar d The hand guard pre vents hands from coming into contact with the moving b lades, f or example, if the oper ator loses grip on the front handle. Check that the hand guard is fitted correctly . Check that the hand guard is undamaged. Vibration damping system Y our machine is equipped with a vibra[...]

English – 9 GENERAL SAFETY PRECA UTIONS Blades T o ensure good cutting results it is impor tant that the contact pressure between the b lades is correct. The contact pressure is adjusted by turning the screws on the underside of the bar clockwise as f ar as they will go . Then turn the screws anticlockwise a 1/4 turn. Lock the screws using the lo[...]

10 – English FUEL HANDLING Fuel safety Ne ver start the machine: 1 If you ha v e spilt fuel on it. Wipe off the spillage and allo w remaining fuel to e vapor ate. 2 If you ha v e spilt fuel on yourself or y our clothes, change your clothes . W ash any part of your body that has come in contact with fuel. Use soap and water . 3 If the machine is l[...]

English – 11 FUEL HANDLING Mixing • Alwa ys mix the petrol and oil in a clean container intended f or fuel. • Alwa ys star t by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol. • Mix (shake) the fuel mixture thoroughly bef ore filling the[...]

12 – English ST AR TING AND ST OPPING Chec k bef ore star ting • Inspect the working area. Remove an y objects that could be thrown out. • Check the cutting attachment. Ne v er use blades that are dull, crac ked or damaged. • Check that the machine is in perf ect working order. Check that all nuts and scre ws are tight. • Make sure the ge[...]

English – 13 W ORKING TECHNIQ UES General w orking instructions Safety instructions regar ding the surroundings • Ne ver allo w children to use the machine. • Ensure that no-one comes closer than 15 m while you are working. • Ne ver allo w any one else to use the machine without first ensuring that they hav e understood the contents of the[...]

14 – English W ORKING TECHNIQ UES Safety instructions after completing w ork • The transpor t guard should alwa ys be fitted to the cutting attachment when the machine is not in use. • Make sure the cutting attachment has stopped bef ore cleaning, carr ying out repairs or an inspection. Disconnect the HT lead from the spark plug. • Alwa ys[...]

English – 15 MAINTENANCE Carb urettor Y our Husqvarna product has been designed and manuf actured to specifications that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. T o ensure that it continues to run at peak perf or mance and to minimise harmful exhaust emissions after the running-in per iod[...]

16 – English MAINTENANCE Cooling system T o keep the working temperature as low as possib le the machine is equipped with a cooling system. The cooling system consists of: 1 Fins on the flywheel. 2 Cooling fins on the cylinder . 3 Cylinder cov er (directs cold air ov er the cylinder). Clean the cooling system with a brush once a week, more ofte[...]

English – 17 MAINTENANCE Gear housing There is a grease nipple on the gearbo x. Use a grease gun to top up with grease. This should be carried out after appro ximately ev er y 60 working hours. Use Husqvarna special grease, No . 503 98 96-01. CA UTION! The gear housing must not be filled completely with grease. The g rease e xpands as the machin[...]

18 – English MAINTENANCE ´®z+R0r¶6(¨ ´®z+R0r¶6(¨ Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and ser vice work described in this Operator’ s Manual. More e xtensive w ork[...]

English – 19 TECHNICAL D A T A T echnical data Note 1: Noise emissions in the environment measured as sound power (L W A ) in conf ormity with EC directive 2000/14/EC . Note 2: Equivalent sound pressure le vel is calculated as the time-w eighted energy total f or sound pressure lev els under various working conditions with the follo wing time dis[...]

´®z+R0r¶6(¨ 2005-11-10 ´®z+R0r¶6(¨ 1150168-26[...]