HP (Hewlett-Packard) NQ286UPABA инструкция обслуживания

HP EliteBook 2530p Notebook PC Maintenance and Service Guide[...]

© Copyright 2010 Hew lett-Packard Development Company, L.P. © Copyright 2008 Hew lett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel and Core are trademarks of Intel Corporation in the U .S. and other countries. Java is a US trademark of Sun Microsystems,[...]

Safety warning notice WARNING! To reduce the possibility of heat-related inju ries or of ove rheating th e computer, do not place the compu ter directly on your lap or o bstruct the computer air ven ts. Use the computer only on a hard, flat surface. Do n ot allow another hard surface, such as an adjoinin g optional printer, or a soft surface, such [...]

iv Safety warning no tice[...]

Table of contents 1 Product description ............ ......... ........... ......... ......... .......... .......... ........... ........ ............ ... ............. ........ ......... .. 1 2 External component id enti fication ...... ......... ........ ........... ........ ........ .......... ........ ........... ........ ... ........... ......[...]

Electrostatic dis charge damage ................. ........................... ...................... ...... 39 Packaging and transporting guidelines ........ ........... ....... ........... ........ 40 Works tation guideline s ..................................................................... 40 Equipmen t guidelines .................... .......[...]

6 Specifications .............. ............. ................. ........... .............. ................ ............ ............ ............... ............. ..... 105 Computer specif ications .. .............. ............ ............... .............. ........... ............... .............. ...... ............ 105 12.1-inch, WXGA displa[...]

RJ-45 (network) .............. ............ .......... ........... ............ .......... .......... ............ .......... .......... .......... ....... 144 Universal Serial Bus ......... ......... ........ ........... ........ ........ .......... ........ ......... .......... ......... ....... ........... .... 145 10 Powe r cord se t requi reme[...]

1 Product description Category Description Product Name HP EliteBook 2530p Notebook PC Processors Intel® LV Core™2 Duo, soldered uFBGA ● SL9600 2.13-GHz, 1066MHZ front side bus (FSB) with 6-MB cache ● SL9400 1.86-GHz, 1066MHz FSB with 6-MB ca che ● SL9300 1.6-GHz, 1066MHz FSB with 6-MB cache Intel ULV Core2 Duo, soldered uFBGA ● SU9400, [...]

Category Description Hard drives Customer-accessible Supports the following SATA primary drives: NOTE: The 4.57-cm (1.80-inch) primary hard drive must be installed in the hard drive bay. Installation of this drive in th e optical drive bay is not supported. ● 160-GB, 5400-rpm ● 120-GB, 5400-rpm ● 80-GB, 5400-rpm Supports the following primary[...]

Category Description S4/S5 wake on LAN on AC power NIC power-down technology Wireless LAN Integrated WLAN options by way of mini-slot which suppo rts WLAN only: Support for 2 dual-band 2.4-/5.0-G Hz WLAN antennae cabled to mini-slot Support for the following WLAN options: ● 802.11a/b/g with Intel Active M anagement Technology (iAMT) support ● 8[...]

Category Description Spill-resistant keyboard Windows Vista® Start button Durable key ca ps Power requirements 65-W Smart AC adapter with localized cabl e plug su pport (3-wire plug with ground pin) 9-cell, 83.0-Wh Li-io n battery with fuel gauge 6-cell, 55.0-Wh Li-io n battery with fuel gauge 3-cell, 31.0-Wh Li-ion battery Security Supports Kensi[...]

2 External component identification Top components Pointing devices Component Description (1) Left TouchPad button* Functions like the left button on an external mouse. (2) TouchPad* Moves the pointer and selects or activates items on the screen. (3) Left pointing stick button* Functions like the left button on an external mouse. (4) Pointing stick[...]

Lights Component Description (1) Power lights (2)* ● On: The computer is on. ● Blinking: The computer is in the Sleep state (Windows Vista) or Standby (Windows XP). ● Off: The computer is off or in Hibernation. (2) Wireless lights (2)† ● Blue: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Mobil[...]

Component Description (7) Battery light ● Amber: A battery is charging. ● Turquoise: A battery is cl ose to full charge capacity. ● Blinking amber: A battery that is the only available power source has reached a low b attery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. ● Off: If the co[...]

Buttons, switches, and fingerprint r eader Component Description (1) Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button to shut dow n the computer. ● When the computer is in the Sleep state (Windows Vista) or Standby (Windows XP), press the b utton briefly to exit the[...]

Component Description (5) Presentation button Starts the presentation feature. (6) TouchPad on/off button Turns the TouchPad on or off. (7) Volume mute button Mutes and restores speaker sound. (8) Volume scroll zone Adjusts speaker volume. Slide your finger to the left to decr ease volume and to the right to increase volu me. You can also press and[...]

Keys Component Description (1) esc key Displays system information when pressed in comb ination with the fn key. (2) fn key Executes frequently used syste m functions when pressed in combination with a function key or the esc key. (3) Windows logo key Displays the Windows Start menu. (4) Windows applications key Displays a shortcut menu for items b[...]

Display Component Description (1) Ambient light sensor Automatically adjusts the display brightness based on the lighting conditions in your environment. (2) Webcam light (select models only) On: The integrated camera is in use. (3) Webcam (select models only) Records audi o and video and captures still photographs. (4) Keyboard light Illuminates t[...]

Front components Component Description (1) Wireless light ● Blue: An integrated wireless device, such as a wire less local area network (WLAN) device, the HP Mobile Broadband Module, and/or a Bluetooth device, is on. ● Amber: All wireless devices are off. (2) Power light ● On: The co mputer is o n. ● Blinking: The computer is in the Sleep s[...]

Rear components Component Description (1) RJ-45 (network) jack Connects a network ca ble. (2) Security cable slot Attaches an opti onal security cable to the computer. NOTE: The security cable is desi gned to act as a d eterrent, but it may not prevent the computer from being mishandled or stolen. Rear componen ts 13[...]

Right-side components NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) ExpressCard slot Supports optional ExpressCards. (2) SD Card Reader Supports the Secure Digital (SD) Memory Card and MultiMediaCard (MMC) optional digital card formats. (3) 1394 port Connects an optional IEEE 1394 or 1394a device[...]

Left-side components NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) Power connector Connects an AC adapter. (2) RJ-11 (modem) jack Connects a modem cable. (3) Powered USB port Provides power to an external device if used with a powered USB cable. (4) USB port Connects an optional USB device. (5) V[...]

Bottom components Component Description (1) Battery release latches (2) Release the battery from the batter y bay. (2) Battery bay Holds the battery. (3) SIM slot (select models only) Contains a wirele ss subscriber identity module (SIM). The SIM slot is located inside the battery bay. (4) Broadband wireless module compartment Contains an HP Mobile[...]

Component Description (8) Speaker Produces sound. (9) Memory module compartment Contains an exp ansion memory module slot and a WLAN module (select models only). NOTE: To prevent an unresponsive system, replace the wireless module only with a wi re less module authorized for use in the computer by the governmental agency that regu lates wireless de[...]

Wireless antennae (select models only) Component Description (1) WLAN antennae (2)* Send and receive wireless signals to communicate with wireless local area networks (WLAN). (2) WWAN antennae (2)* Send and receive wireless signals to communicate with wire less wide-area networks ( WWAN). *The antennae are not visible from the outside of the comput[...]

3 Illustrated parts catalog Serial number location The service tag, affixed to the bottom of the comp uter, provides information that ma y be needed when troubleshooting system problems. The service tag provides the following information: (1) Product name: This is the product name affixed to th e front of the compute r. (2) Serial number (s/n): T h[...]

20 Chapter 3 Illustrated parts catalo g[...]

Computer major components Item Description Spare part number (1) 12.1-inch, WXGA AntiGlare display assembly (See Display components on page 27 for display assembly component spare part number infor mation.) Computer majo r components 21[...]

Item Description Spare part number With webcam 492576-001 Without webcam 492575-001 (2) Switch co ver (includes display lid switch board and cable and LED board and cable) 492556-001 (3) Keyboard wi th pointing stick (includes keyboard cabl e and pointing stick cable) ● For use in Brazil 506677-201 ● For use in the Czech Republic 506677-221 ●[...]

Item Description Spare part number (5) Memory modules (2 , PC2-6400, 800-MHz, DDR2) 4-GB 492572-001 2-GB 492571-001 1-GB 492570-001 (6) Top cover (includes TouchPad boar d and cable, TouchPad button board and cable, and TouchPad bracket) With fingerprint reader 492557-001 Without fingerprint reader 514059-001 (7) Speaker 481109-001 (8) ExpressCard [...]

Item Description Spare part number DVD-ROM Drive 492558-001 (16) Base enclosure (includes display latch switch, battery relea se latch, and rubber feet) 492547-001 (17) Hard drives (2, include bezel and bracket) Primary hard drive NOTE: The 4.57-cm (1.80-inch) primary hard drive must be installed in the hard drive bay. Installation of this drive in[...]

Item Description Spare part number ● Broadcom 4322AGN WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armen ia, Aruba, Australia, Austr ia, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Bar bados, Belarus, Belg ium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, B[...]

Item Description Spare part number ● Broadcom 4312G WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorr a, Angola, Antigua and Barbuda, Argentina, Armen ia, Aruba, Australia, Austr ia, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Bar bados, Belarus, Belg ium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Br[...]

Display components Item Description Spare part number (1) Display bezel (includes HP logo and co mputer model number label) For use with models that in clude a webcam 495022-001 For use with models that do not include a we bcam 495019-001 Display bezel adhes ive (not illustrated) 497013-001 (2) Display Hinge Kit (includes left and right hinges and [...]

Item Description Spare part number With webcam 496490-001 Without webcam 495020-001 28 Chapter 3 Illustrated parts catalo g[...]

Mass storage Item Description Spare part number (1) Primary hard drive NOTE: The 4.57-cm (1.80-inch) primar y hard drive must be installed in the hard drive bay. Installation of this drive in the optical drive bay is no t supported. 160-GB, 5400-rpm hard drive 503732-001 120-GB, 5400-rpm hard drive 492560-001 80-GB, 5400-rpm hard drive 492565-001 8[...]

Item Description Spare part number Secondary hard drive system connector boar d (required for installation o f secondary hard drive) 495028-001 (3) Optical drive DVD-ROM Drive 492558-001 DVD±RW and CD-RW SuperMulti D ouble-Layer Combo Drive 492559-001 30 Chapter 3 Illustrated parts catalo g[...]

Plastics Kit Item Description Spare part number Plastics Kit : 492577-001 (1) ExpressCard slot insert (2) Bluetooth module compartment cover (includes one captive screw , secured by a C-clip) (3) Broadband wireless module compartment cover (inclu des one captive screw, secured by a C-clip) (4) Hard drive bay cover (includes 2 c aptive screw s, secu[...]

Miscellaneous parts Description Spare part nu mber 65-W Smart AC Adapter 463958-001 Cable Kit, includes Bluetooth, LED, and mode m cables 492555-001 Optical drive bay insert assembly, includes additional USB port 498455-001 Power cord 490371-001 Rubber Kit (includes all rubber/m ylar co mputer components) 492578-001 Screw Kit 492579-001 Smart card [...]

Sequential part number listing Spare part number Description 459263-001 Broadcom 4312G WiFi Adapter (802.11b/g WLAN module) for use in the United States and Canada 459263-002 Broadcom 4312G WiFi Adapter (802.11b/g WLAN module) for use in Afg hanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Ar me nia, Aruba, Australia, Au[...]

Spare part number Description 487330-002 Broadcom 4322AGN WiFi Adapter (802.11a/b/g/n WLAN module) for use in Afghanistan, Albania, Algeria , Andorra, Angola, Antigua and Barbuda, Argentina, Ar menia, Aruba, Australia, Austr ia, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia[...]

Spare part number Description 492568-001 Fan 492570-001 1-GB, PC2-6400, 800-MHz, DDR2 memory modu le 492571-001 2-GB, PC2-6400, 800-MHz, DDR2 memory modu le 492572-001 4-GB, PC2-6400, 800-MHz, DDR2 memory modu le 492573-001 Microphone 492574-001 6.35-cm (2.50-inch) secondary hard dr iv e cage assembly (incl udes add itional USB port) 492575-001 12.[...]

Spare part number Description 506677-071 Keyboard with pointing stick for use in Spain 506677-081 Keyboard with pointing stick for use in Denmark 506677-091 Keyboard with pointing stick for use in Norway 506677-111 Keyboard with pointing stick for use in Switzerland 506677-121 Keyboard with pointing stick for use in French Canada 506677-131 Keyboar[...]

4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to comple te the removal and re placement procedures: ● Flat-bla ded screw driver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdr iver Service considerations The following sectio ns include so[...]

Cables and connectors CAUTION: When servicing the computer, be sure that c ables are placed in their prop er locations during the reassembly p rocess. Improp er cable placem ent can damage th e computer. Cables must be handle d with extreme care to avo id damage. Apply only the ten sion require d to unseat or seat the cables during removal an d ins[...]

Grounding guidelines Electrostatic discharge damage Electronic componen ts are sensit ive to electrost atic discharge (ESD). Circuitry design and st ructure determine the deg ree of sensitiv ity. Networ ks bu ilt into many integrated circuits provide some protection, bu t in many cases, ESD conta ins enough power to alter d evice parameters or melt[...]

Packaging and transporting guidelines Follow these groun ding guidelines whe n packaging and transp orting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts an d assemblies wi th conductive or approv ed containe rs or packaging. ● Keep ESD-sensitive parts in their conta [...]

Equipment guidelines Grounding equi pment must include eith er a wrist strap o r a foot strap at a grou nded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexibl e straps with a minimu m of one megohm ±1 0% resi stance in the ground cords. To provid e proper ground, wear a strap snugl y against [...]

Unknown user password If the computer you are servicing has an unknown user password, follow these steps to clear the password: NOTE: These steps also clear CMOS. 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect al[...]

Component replacement procedures This chapter provides removal an d replacement proced ures. There are as many as 6 0 screws, in 9 different sizes, that mu st be re moved, replac ed, or loosene d when servicing the computer. Make specia l note of each screw size an d location during remova l and replacement. Component replacement procedures 43[...]

Service tag The service tag, affixed to the bottom of the comp uter, provides information that ma y be needed when troubleshooting system problems. The service tag provides the following information: (1) Product name: This is the product name affixed to th e front of the compute r. (2) Serial number (s/n): T his is an alphan umeric identifier that [...]

Computer feet The computer feet a re adhesive -backed rubber pads . The feet are in cluded in the Rubber Kit, spare part number 492 578-001. The re are 4 ru bber feet that atta ch to the base enclo sure in the locati ons illustrated below. Component replacement procedures 45[...]

Battery Description Spare part number 9-cell, 83.0-Wh Li-ion battery 492550-001 6-cell, 55.0-Wh Li-ion battery 492549-001 3-cell, 31.0-Wh Li-ion battery 492548-001 Before disa ssembling the co mputer, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en sh[...]

SIM NOTE: This section applies on ly to computer models with WWAN capability. NOTE: If there is a SIM inserted in th e SIM slot, it must be remove d before disassembling the computer. Be sure that the SIM is reinserted in the SIM slot after reassembli ng the computer. Before removing the SIM, follow these steps: 1. Shut down the co mputer. If you a[...]

Bluetooth module Description Spare pa rt number Bluetooth modu le 483113-001 Before removing the Bluetooth modul e, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connect[...]

5. Remove the Bluetoot h module (3) . Reverse the abov e procedur e to install the Blueto oth module. Component replacement procedures 49[...]

Expansion memory module Description Spare part number Memory modules (PC2-6400, 800-MHz, DDR2) 4-GB 492572-001 2-GB 492571-001 1-GB 492570-001 Before removing the memory module, follo w these step s: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough t[...]

4. Remove the memory module (2) by pul ling the module a way from the slot at an angle. NOTE: The memory modu le is designed with a no tch (3) to prevent incorrect inserti on into the memory module slot. Reverse this procedure to insta ll the memory module . Component replacement procedures 51[...]

WLAN module Description Spare part number ● Intel WiFi Link 5100ABGN (802.11a/b/g/n WLAN module) : For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Berm uda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong , India, [...]

Description Spare part number ● Broadcom 4312G WiFi Adapter (802.11b/g WLAN mod ule): For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antig ua & Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herz[...]

2. Lift the front edge of the mem ory module compartment co ver (2) , swing it back, and remove the cover (3) . The memory module com partment cover is includ ed in the Plastics Kit, spare part number 492577-0 01. 3. Disconnect th e WLAN antenna ca bles (1) from the terminals on the WLAN module. NOTE: The black WLAN an tenna cable i s connected to [...]

Primary hard drive NOTE: The 4.57-cm (1.80-inch) primary hard drive mu st be installed in the hard drive bay. Installation of this drive in the optical drive ba y is not supp orted. NOTE: All primary hard drive spare part kits include a hard drive bracket. Description Spare part nu mber 160-GB, 5400-rpm hard drive 503732-001 120-GB, 5400-rpm hard d[...]

4. Loosen the 2 Phillips 2. 0×6.0 captive screws (1) that secure the hard drive bra cket, and remove the hard drive bracket (2) . 5. Remove the Phillips screw that secures the conn ector board to th e base enclosure (3) . 6. Tilt the primary hard drive up to ward you (1) to disengage it from the compartment. 7. Grasp the edges of the co nnector bo[...]

9. Pull the edges of th e protective rubber gasket o ut and away from the hard drive (1) , and remove the gasket (2) . 10. If it is necessary to replace the primary hard drive connector bo ard, rele ase the ZIF con nectors (1) to which the prima ry hard drive connector boa rd cable is attached, and d isconnect the cable (2) . 11. Remove the primary[...]

WWAN module Description Spare pa rt number HP un2400 Mobile Broadband Module 483377-002 CAUTION: The WWAN module and the WL AN module are not in terchangeable . CAUTION: To preven t an unresponsive system, replace the wireless module only w ith a wireless module authorized fo r use in the computer by the governmental agency that regulates wirele ss[...]

5. Remove the two Phillips PM2. 0×4.0 screws th at secure the module to the computer (2) . 6. Remove the WWAN module (3) by pulling the module away from the slo t at an angle. NOTE: WWAN modules are designed with a notch (4) to prevent incorrect inse rtion. Reverse this procedure to insta ll the WWAN module. Component replacement procedures 59[...]

Optical drive Description Spare part nu mber Optical drives DVD-ROM Driv e 492558-001 DVD±RW and CD-RW SuperMulti Double-Layer C ombo Drive 492559- 001 Before removing the optical drive, follow these ste ps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down t[...]

7. Remove the optical drive bracket (2) . Reverse this procedure to rea sse mble and install an optical drive. Component replacement procedures 61[...]

Switch cover and keyboard Description Spare part number Switch cover (includes display lid switch board and cable) 492556-001 Keyboard with po inting stick (includes keyboard cable and pointing stick cable) ● For use in Brazil 506677- 201 ● For use in the Czech Republic 506677-221 ● For use in Denmark 506677-081 ● For use in Europe 506677-0[...]

Before removing the switch cover and keyboard, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the c omputer by fi[...]

6. Release the switch cove r (1) by sliding it to the right, an d then lifting it (2) as far as the LED board cable and the power button board cab le allow. 7. Lift the rear edge of the keyboard and swing it up and forward until it rests upside down o n the palm rest. 8. Release the zero inserti on force (ZIF) conne ctor (1) to which the keyboard c[...]

9. Release the ZIF conne ctor (3) to which the pointing stick cable is attached, and discon nect the pointing stick cable (4) from the system board. 10. Remove the keyboard. 11. Disconnect the LED board cable (1) and the power button bo ard cable (2) from the system board. 12. Remove the switch cover. Reverse this procedure to insta ll the switch c[...]

RTC battery NOTE: Removing the RTC batte ry and leaving it un installed for 5 or more minute s causes all passwords and CMO S settings to be clea red. Description Spare part number RTC battery 481089-001 Before r emoving th e RTC bat tery, foll ow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rna[...]

Secondary hard drive NOTE: The 6.35-cm (2.50-inch) secondary hard drive must be installed in the optical drive bay. Installation of this drive in the hard drive bay is not su pported. (T h is option is no t available when the optical drive is installed.) Description Spare part nu mber 320-GB, 7200-rpm hard drive 513949-001 250-GB, 5400-rpm hard dri[...]

2. Remove the 5 Mylar screw covers (1) , the 4 Phillips screws (2) , and the 2 Phillips PM2. 0×6.0 screws (3) that secure the seco ndary hard driv e cradle assembly to the computer. 3. Turn the computer right-side up, and open the display as far as po ssible. 4. Disconnect the secondary hard drive cradle assembly USB ca ble from the system bo ard.[...]

6. Remove the secondary hard drive cradle assembly (3) from the optical drive bay. 7. Remove the four Phillips PM3. 0×4.0 secondary hard drive screw s that secure the secondary hard drive to the cradle assemb ly. 8. Tilt the hard drive up and away fro m the connector board (1) , and disconn ect the hard drive from the connector board (2) . Compone[...]

9. Remove the hard drive from th e cradle assembly (3) . 10. If it is necessary to replace the seco ndary hard drive connector board, remo ve the two Phillips screws that secu re the conne ctor board to th e cradle assembly (1) . 11. Remove the secondary ha rd drive connector bo ard (2) . 12. If it is necessary to replace the secondary har d drive [...]

14. Remove the secondary ha rd drive system conn ector board (4) . Reverse the ab ove proced ure to reassemb le and install the second ary hard drive. Component replacement procedures 71[...]

Primary memory module Description Spare part number Memory modules (PC2-6400, 800-MHz, DDR2) 4-GB 492572-001 2-GB 492571-001 1-GB 492570-001 Before r emoving th e primary mem ory module , follow the se steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down t[...]

Display assembly Description Spare part number 12.1-inch, WXGA AntiGlare display a ssembly With a webcam 492576-001 Without a webcam 492575-001 Display bezel (includes HP logo and com puter model numbe r label) For use with models that include a webcam 495022-001 For use with models that do not include a w ebcam 495019-001 Display bezel adhesive 49[...]

3. Disconnect th e wireless antenna cables from the WWAN mo dule (3) , and feed them do wn through the ho le (4) . 4. Turn the comput er right side up , and open the d isplay . 5. Thread the WLAN (1) and WWAN (2) ca bles out through the to p cover, and rele ase the cables from the top cover clips (3) . 6. Close the compute r and turn the computer u[...]

7. Remove the two Mylar screw covers (1) and the four Tor x T8M2.0 ×6.0 sc rews (2) that secure the display assembly to the computer. 8. Turn the computer right-side up, with the front toward you. 9. Open the computer. CAUTION: The display assembly will be unsupported when the fo llowing screws are removed. To prevent damage to the d isplay assemb[...]

12. If it is necessary to replace the di splay be ze l, remove the fo ur rubber screw covers (1) and the four Torx T8M2.5×6.0 screws (2) that secure the display be zel to the display assembly. NOTE: The rubber screw co vers on the displa y bezel top ed ge are thicker than the rubber screw covers on the d isplay bezel b ottom edge. 13. Flex the ins[...]

17. Remove the display pan el (3) . 18. Remove the two Phillips PM2.0×4.0 screws (1) that secure each display hing e to the displ ay panel. 19. Remove the display hin ges (2) . 20. If it is necessary to replace the di splay panel ca ble, turn the display panel upside down, with the display panel bo ttom edge towa rd you. 21. Disconnec t the displa[...]

23. Remove the display pan el cable (3) . 24. If it is necess ary to replace the microphones (1) , remove the microphones from the displa y enclosure (2) . Reverse this procedure to rea ssemble an d install the d isplay assembly. 78 Chapter 4 Remova l and replacement procedures[...]

Top cover Description Spare part number Top cover (includes To uchPad board and cable, TouchPad b utton board and cable, and TouchPad bracket) With fingerprint reader 492557-001 Without fingerprint reader 514059-001 Before removing the top cover, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hi[...]

2. Remove the following screw covers and screws: (1) Four rubber screw cove rs. The rubber scre w co vers are inclu ded in the Rubber Kit, spare part number 481106-001 . (2) Six Torx T8M2.5×6.0 screws. (3) One Phillips PM2.0×5.0 scre w. (4) One To rx T8M2.0 ×5.0 sc rew. 3. Turn the computer right-side up, with the front toward you. 4. Disconnec [...]

6. Lift the rear edge of the top cover (1) and swing it up and forwar d until it rests at an angle . 7. Lift the front edge of the top cover (2) until it disengages from the base enclosure. 8. Remove the top cover. Reverse this procedure to insta ll the top cover. Component replacement procedures 81[...]

LED board Description Spare part number LED board (includes cable and Mylar cover) 499209-001 Before removing the LED boa rd, follow thes e steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devi[...]

3. Release the LED b oard (3) from the clips built into the base enclosure. 4. Remove the LED board and cab le. Reverse the abov e procedur e to install the LED bo ard. Component replacement procedures 83[...]

Speaker Description Spare part number Speaker 481109-001 Before removing the speaker, follow these ste ps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Discon[...]

Bluetooth module cable NOTE: The Bluetooth modu le cable is included in the Cable Kit, spa re part number 4925 55-001. Before removing the system board, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Dis[...]

System board Description Spare part number System board (includes p rocessor, r eplacement thermal material, and r eplacement thermal material cleaning kit) With LV SL9600 processor 513947-001 With LV SL9400 processor 492552-001 With LV SL9300 processor 492551-001 With ULV SU9400 processor 513946-001 With ULV SU9300 processor 492553-001 Before remo[...]

Remove the system bo ard: 1. Release the ZIF conne ctor to which th e front LE D board cable is attached and disconnec t the front LED board cable (1) from the system board. 2. Disconnec t the speaker cabl e (2) from the system board. 3. Remove the three Torx 8 T8M2.5×6.0 screw s (3) that secure the system board to the base enclosure. 4. Flex the [...]

ExpressCard assembly Description Spare part number ExpressCard assemb ly 492567-001 Before removing the PC Card assembly, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices c[...]

3. Turn the system board rightside up, with the rear toward you. 4. Remove the ExpressCard assembly. Reverse this procedure to inst all the ExpressCard assemb ly. Component replacement procedures 89[...]

Modem module Description Spare part number Modem modules NOTE: The modem module spare part kits do not include a mode m module cable. The modem module cable is inclu ded in the Cable Kit, spare part number 49 2555-001. For use in all countries and regions ex cept Australia and New Z ealand 461750-001 For use only in Australia and New Zealand 461750[...]

4. Remove the modem module . Reverse this procedure to in stall the modem module. Component replacement procedures 91[...]

Fan Description Spare part num ber Fan (includes thermal material) 492568-001 NOTE: To proper ly ventilate the comp uter, allow at least a 7.6-cm (3-i nch) clearance on the right side and rear p anel of the com puter. The computer uses an electric fan fo r ventilation. The fan is controlled by a temperature sensor and is designed to turn on autom a[...]

4. Lift the fan up (3) to remove. Reverse this procedure to insta ll the fan. Component replacement procedures 93[...]

Heat sink Description Spare part number Heat sink (includes replacement thermal material and r eplacement thermal mate rial cleaning kit) 492582–001 Before removing the heat si nk, follow the se steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ou[...]

3. Remove the heat sink (2) . NOTE: The thermal mate rial must be thoroughly clean ed from the surfaces of the heat sink and system board each time the heat sink is re moved. Thermal paste an d pads are located on the heat sink (1) and on syste m board components (2) . Replacement thermal material is included with al l heat sink and system bo ard s[...]

5 Computer Setup Starting Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setu p menu items listed in this guide ma y not be supp orted by your computer. NOTE: An external ke yboard or mouse con nected to a USB port can be [...]

Using Computer Setup Navigating and selectin g in Computer Setup The information and setti ngs in Computer Setup a re accessed from the File, Se curity, Diagnostics, and System Configuration men us. To navigate and select in C omputer Setup, follow these steps: 1. Turn on or restart the compu ter, and then press esc while the “Press the ESC key f[...]

Restoring factory setting s in Computer Setup NOTE: Restoring defaults will not change the hard drive mode. To return all settings in Computer Setup to the values that were set at the factory, follow these steps: 1. Turn on or restart the compu ter, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bo[...]

Computer Setup menus The menu tables in this sect ion provide an over view of Comput er Setup options. NOTE: Some of the Computer Se tup menu items list ed in this chapter may no t be supported by your computer. File menu Select To do this System Information ● View identification information for the computer and the batteries in the system. ● V[...]

Security menu NOTE: Some of the menu it ems listed in this section may not b e supported by you r computer. Select To do this Setup BIOS Administrator Password Set up a BIOS administrator password. User Management (requires a BIOS administrator password) ● Create a new BIOS user account. ● View a list of ProtectTools users. Password Policy (req[...]

Diagnostics menu Select To do this System Diagnostics menu ● F1 System Information—Displays the follow ing information: ◦ Identification information for the computer and the batteries in the system. ◦ Specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. ● F2 Start[...]

System Configuration menu NOTE: Some of the listed System Con figuration opti ons may not be supported by your compu ter. Select To do this Language Change the Computer Setup language. Boot Options ● Set a Startup Menu delay (in seconds). ● Enable/disable Custom Logo (d isabled by default). ● Enable/disable Display Diagnostic URL (e nabled by[...]

Select To do this NOTE: Availability of the options above varies by computer model. ● Enable/disable secondary battery fast charge (en abled by default). ● Enable/disable HP QuickLook 2 (enabled by default). ● Enable/disable Virtualization Technology (select models only; disabled by default). ● Enable/disable TXT (Int el® Trusted Execution[...]

Select To do this Port Options (all are enabled by default) NOTE: A ll port options are enabled by default. ● Enable/disable the Smart Ca rd slot. ● Enable/disable the Expr essCard slot. ● Enable/disable the serial port. ● Enable/disable the parallel por t. ● Enable/disable the flash me dia reader. ● Enable/disable the USB port. CAUTION[...]

6 Specifications Computer specifications Metric U.S. Dimensions Depth 21.43 cm 8.44 in Width 28.23 cm 11.11 in Height (front to rear) 2.52 to 3.40 cm 0.99 to 1.34 in Weight Equipped with DVD-ROM Drive, 9-cell battery, and WLAN module 1.79 kg 3.95 lbs Equipped with DVD-ROM Drive, 6-cell battery, and WLAN module 1.64 kg 3.62 lbs Equipped with DVD-ROM[...]

12.1-inch, WXGA display specifications Metric U.S. Dimensions Height 16.9 cm 6.7 in Width 26.2 cm 10.3 in Diagonal 30.8 cm 12.1 in Number of colors Up to 16.8 million Contrast ratio 250:1 (typical) Brightness 180 nits (typical) Pixel resolution Pitch 0.279 × 0.279 mm Format 1280 × 800 Configuration RGB vertical stripe Backlight Edge lit Character[...]

Hard drive specifications 250-GB* 200-GB* 160-GB* 120-GB* 80-GB* Dimensions Height 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm Width 70 mm 70 mm 70 mm 70 mm 70 mm Weight 102 g 102 g 102 g 102 g 102 g Interface typ e SATA SATA SATA SATA SATA Transfer rate Synchronous (maximum) 100 MB/sec 100 MB/sec 100 MB/sec 100 MB/sec 100 MB/sec Security ATA security ATA s[...]

DVD-ROM Drive specifications Applicable disc DVD-ROM (DVD-5, DVD-9, DVD-10, DVD- 18), CD-ROM (Mode 1 and 2), CD Digital Audio, CD-XA ready (Mode 2, For m 1 and Form 2), CD-I (Mod e 2, Form 1 and Form 2), CD-RW, Photo CD (single and multisession), a nd CD-Bridge Access time CD DVD Random < 100 ms < 125 ms Cache buffer 5 12 KB Data transfer rat[...]

DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications Applicable disc Rea d: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD- EXTRA, Portfolio, CD-R, CD-RW), CD- R, CD-RW, DVD-ROM (DVD-5, DVD -9, DVD-10, DVD-18), DVD-R, DV D-RW, DVD+R, DVD +RW, [...]

System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller DMA5* Available for ExpressC ard DMA6 Not assigned DMA7 Not assigned *ExpressCard controller can use DMA 1, 2, or 5. 110 Chapter 6 Spec ifications[...]

System interrupt specifications Hardware IRQ System function IRQ0 System timer IRQ1 Standard 101-/102-Key or Microso ft® Natural Keyboard IRQ2 Cascaded IRQ3 Intel 82801DB/DBM USB2 Enhanced Host Controller —24CD IRQ4 COM1 IRQ5* Conexant AC—Link Audio Intel 82801DB/DBM SMBus Con troller—24C3 Data Fax Modem with SmartCP IRQ6 Diskette drive IRQ7[...]

System I/O address specifications I/O address (hex) System function (s hipping configuration) 000 - 00F DMA controller no. 1 010 - 01F Unused 020 - 021 Interrupt controller no. 1 022 - 024 Opti chipset configuration registers 025 - 03F Unused 02E - 02F 87334 “Super I/O” configuration for CPU 040 - 05F Counter/timer registers 044 - 05F Unused 06[...]

I/O address (hex) System function (s hipping configuration) 202 - 21F Unused 220 - 22F Entertainment audio 230 - 26D Unused 26E - 26 Unused 278 - 27F Unused 280 - 2AB Unu sed 2A0 - 2A7 Unused 2A8 - 2E7 Unused 2E8 - 2EF Reserved serial port 2F0 - 2F7 Unu sed 2F8 - 2FF Infrared port 300 - 31F Unused 320 - 36F Unused 370 - 377 Secondary diskette drive[...]

System memory map specifications Size Memory address System function 640 KB 00000000-0009FFFF Base memory 128 KB 000A0000-000BFFFF Video memory 48 KB 000C0000-000CBFFF Video BIOS 160 KB 000C8000-000E7FFF Unused 64 KB 000E8000-000FFFFF System BIOS 15 MB 00100000-00FFFFFF Extended memory 58 MB 04800000-07FFFFFF Super extended memory 58 MB 04800000-07[...]

7 Screw listing This section provides specificat ion and reference information for the screws and screw locks used in the computer. All screws listed in this section ar e available in the Screw Kit, spare part n umber 492579-001. 115[...]

Phillips PM 2.0×4.0 screw Color Quantity Length Thread Head diameter Black 16 4.0 mm 2.0 mm 4.5 mm Where used : 1 screw that secu res the Bluetoot h module to the Blue tooth module co mpartment cover Where used : 2 screws that secure the WLAN module to the ba se enclosure 116 Chapter 7 Screw listing[...]

Where used : 2 screws that secure the WWAN board to the base enclosure Where used : 2 screws that secure the optical drive bracket to the optical d rive Where used : 4 screws that secure the displa y hinges to the display pane l Phillips PM 2.0×4.0 screw 117[...]

Where used : One screw that secures th e top cover to the base enclosure Where used : One screw that secures th e speaker to the base enclosure Where used : 2 screws that secure t he mode m module to the system board 118 Chapter 7 Screw listing[...]

Where used : One screw that secures the fa n to the system boa rd Phillips PM 2.0×4.0 screw 119[...]

Torx T8M2.0×5.0 screw Color Quantity Length Thread Head diameter Black 13 5.0 mm 2.0 mm 4.5 mm Where used : 2 screws that secure the op tical drive to the computer Where used : 2 screws that secure the disp lay assembly to the computer 120 Chapter 7 Screw listing[...]

Where used : 4 screws that connect the bezel to the display assembly Where used : One screw that secures th e top cover to the base enclosure Where used : One screw that secures th e top cover to the base enclosure Torx T8M2.0×5.0 screw 121[...]

Where used : One screw that secures th e primary hard drive to the computer Where used : Two screws th at secure the Expr es sCard assembly to the system board 122 Chapter 7 Screw listing[...]

Torx T8M2.0×6.0 captive screw Color Quantity Length Thread Head diameter Black 2 6.0 mm 2.0 mm 5.0 mm Where used : 2 captive screw s that secure the ha rd drive bracket t o the primary hard drive (screws secured by C-clips) Torx T8M2.0×6.0 captive screw 123[...]

Phillips PM2.5×4.0 screw Color Quantity Length Thread Head diameter Black 3 6.0 mm 2.0 mm 5.0 mm Where used : 2 screws that secure the displa y panel to the display enclosure Where used : One screw that secures the primary me mory module shield to the top cover 124 Chapter 7 Screw listing[...]

Phillips PM2.5×6.0 captive screw Color Quantity Length Thread Head diameter Black 5 6.0 mm 2.5 mm 5.0 mm Where used : (1) One captive screw that secures the Bluetooth modu le cover to the computer (screw is secured by a C-clip) (2) One captive screw that secures the memory modu le compartment cover to the computer (screw is secured by a C-clip) (3[...]

Phillips PM2.5×6.0 screw Color Quantity Length Thread Head diameter Black 11 6.0 mm 2.5 mm 5.0 mm Where used : One screw that secures the switch cover to th e base enclosure Where used : 4 screws that secure the optical bay hard drive to the co mputer 126 Chapter 7 Screw listing[...]

Where used : 4 screws that secure the optical bay hard drive to the h ard drive bracket Where used : 2 screws that secure the hard drive to the connecto r board Phillips PM2.5×6.0 screw 127[...]

Torx T8M2.5×6.0 screw Color Quantity Length Thread Head diameter Black 11 6.0 mm 2.5 mm 5.0 mm Where used : 6 screws that secure the top cover to the base enclosure Where used : 2 screws that secure the top cover to the base enclosure 128 Chapter 7 Screw listing[...]

Where used : 3 screws that secure the system board to the base enclosure Torx T8M2.5×6.0 screw 129[...]

Torx T8M2.5×9.0 captive screw Color Quantity Length Thread Head diameter Black 4 9.0 mm 2.5 mm 5.0 mm Where used : 4 captive screws that secure the heat sink to the system board (screws secured by C- clips) 130 Chapter 7 Screw listing[...]

Phillips PM2.5×11.0 captive screw Color Quantity Length Thread Head diameter Black 5 11.0 mm 2.5 mm 5.0 mm Where used : 5 captive screws that secure the keyboar d to the computer (screws secured by C-clips) Phillips PM2.5×11.0 captive screw 131[...]

8 Backup and recovery Backup and recovery in Windows Vista Overview To protect your information, use the Backup an d Restore Center to back up individua l files and folders, back up your entire hard drive (selec t models only), or cr eate system restore points. In case of system failure, you can use the backup file s to restore the contents of yo u[...]

Backing up your information Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup. As you add new software and data file s, you should continue to back up your system on a regular ba sis to maintain a re asonably current backup. You can back up your i nform[...]

Performing a recovery In case of system failure or inst ability, the computer provides the following tools to recover your files: ● Windows recovery to ols: You can use the Backup and Restore Center to recover information you have previously backed up. You can also us e Windows Star tup Repair to fix problems that might prevent Windows fr om star[...]

Using f11 CAUTION: Using f11 complete ly erases hard dr ive conten ts and reformats the hard drive. All files you have created and an y software installed on the computer are permanen tly removed. The f11 recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory. Software not installed a t the fact[...]

Backup and recovery in Windows XP Overview To protect your in formation, use the Win dows® Ba ckup utility (select models only) to back up files and folders or create recovery points. In case of system failur e, you can use the backup files to restore your computer. Windows provides the following optio ns: ● Backing up individual files and folde[...]

Backing up your information Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup. As you add new software and data file s, you should continue to back up your system on a regular ba sis to maintain a re asonably current backup. You can back up individu al [...]

Performing a recovery In case of system failure or inst ability, the computer provides the following tools to recover your files: ● Windows recov ery tools (select models only): Yo u can use the Windows Backup utility to recover information you have previou sly backed up. ● Operating System and Driver Recovery discs (included with your computer[...]

9 Connector pin assignments Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-in (microphone) 139[...]

Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground 140 Chapter 9 Conn ector pin assignments[...]

External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9+ 5 V D C 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock External monitor 141[...]

IEEE 1394 (FireWire) Pin Signal 1 Twisted-pair B, differential signals 2 Twisted-pair B, differential signals 3 Twisted-pair A, differential signals 4 Twisted-pair A, differential signals 142 Chapter 9 Conn ector pin assignments[...]

RJ-11 (modem) Pin Signal 1 Unused 2T i p 3R i n g 4 Unused 5 Unused 6 Unused RJ-11 (modem) 143[...]

RJ-45 (network) Pin Signal 1T r a n s m i t + 2T r a n s m i t - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused 144 Chapter 9 Conn ector pin assignments[...]

Universal Serial Bus Pin Signal 1+ 5 V D C 2 Data - 3 Data + 4 Ground Universal Serial Bus 145[...]

10 Power cord set requirements The wide range input fe ature of the co mputer permits it to ope rate from any line volt age from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor powe r cord set included wi th t he computer meets the requirem ents for use in the country or region where the e quipment is purchased . Power cord sets fo[...]

Requirements for specific countries and regions Country/region Accredited a gency Applicable note nu mber Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands KEMA 1 Norway NEMKO 1 The People's Republic of China CCC 5 South Korea EK 4 Swe[...]

11 Recycling Battery When a battery has reached the end of its use ful life, do n ot dispose of the ba ttery in general household waste. Follo w the local laws a nd regulati ons in your area for computer b attery disposal. 148 Chapter 11 Re cycling[...]

Display WARNING! The backlight contains mercury. Exe rcise caution when removing an d handling the backlight to avoid dama ging this component an d causing exposure to the mercury. CAUTION: The procedures in this chapter can resu lt in damage to d isplay components. The only components intended for recycling purposes are the liquid crystal display [...]

Perform the following ste ps to di sassemble the display assembly: 1. Remove all screw covers (1) and screws (2 ) that secure the display bezel to the display assembly. 2. Lift up and out o n the left and ri ght inside edges (1) and the top and b ottom inside edge s (2) of the display beze l until the bezel disengag es from the display assemb ly. 3[...]

4. Disconnect all disp lay panel cables (1) from the display i nverter and remove the in verter (2) . 5. Remove all screws (1) that secure the display panel a ssembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display pa nel assembly upside down . 8. Remove all screws that secure the d[...]

10. Remove the display pan el frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlig ht cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel righ t-side up. 152 Chapter 11 Re cycling[...]

15. Remove the backlight cables (1) from the clip (2) in the display panel . 16. Turn the display pane l upside down. WARNING ! The backlight contains mercury. Exercise caution when removing and handling t he backlight to avoid damag ing this compon ent and causin g exposure to the mercu ry. 17. Remove the backlight frame from th e display panel. D[...]

18. Remove the backlight from the backlight frame. 19. Disconnec t the display pa nel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display re ar panel. 21. Release the LCD panel (3) from the d isplay rear panel. 22. Release the tape (4) that secures th e LCD panel to the display rea r panel. 23. Remove th[...]

Index Symbols/Numerics 1394 port, identifying 14 A AC adapter, spare part number 32, 33 ambient light se nsor, identifying 11 AMT options AMT setup prompt (CTRL-P) 104 firmware pr ogress event support 104 firmware verbosity 104 terminal emulation mode 104 TYPE-131 in SMBIOS 104 unconfigure AMT on next boot 104 USB key provisioning support 104 anten[...]

restoring factor y settings 98 Security menu 100 System Configuration menu 102 using 97 computer specifications 105 connector, power 15 connectors, service considerations 38 D device configurations 102 Diagnostics menu 101 discs Driver Recovery 138 Operating System 138 Disk Sanitizer 100 diskette drive precautions 38 product description 2 display a[...]

keyboard light button, identifying 11 keyboard light, identifying 11 keypad keys, identifying 10 keys esc 10 fn 10 function 10 keypad 10 Windows a pplications 10 Windows lo go 10 L LAN Power Save 102 language, changi ng in Computer Setup 102 latches, batt ery release 16 LED board remov al 82 spare part numbers 23, 35, 82 left TouchP ad button 5 leg[...]

chipset 1 diskette drive 2 docking 3 Ethernet 2 external media ca rds 3 graphics 1 hard drives 2 keyboard 3 memory module 1 modem module 2 operating system 4 optical drives 2 panels 1 pointing devices 3 ports 3 power requirements 4 processors 1 product name 1 security 4 serviceability 4 wireless 3 product name 1 R RAID (Redundant Array of Independe[...]

system date and time 99 System Diagnostics menu 101 system DMA 110 system fan 102 system IDs 100 system information 99 system memory map 114 T thermal material, replacem ent 95 tools required 3 7 top cover remov al 79 spare part numbers 23, 34, 36, 79 TouchPad on/off button, identifying 5 TouchPad on/off light, identifying 6 TouchPad scroll zo ne 5[...]