HP (Hewlett-Packard) LTN1565 инструкция обслуживания

TFT -LCD TELEVISION L TN1565 L TN1765 SERVICE DIVISION 400 V alley Road, Suite 201 Mount Arlington, NJ 07856 TEL: 1-800-SAMSUNG (1-800-726-7864) www .samsungusa.com BN68-00438A- 0? 01-FRONT COVER-01_en 2/25/03 9:39 AM Page 1[...]

W arning! Important Safety Instructions CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER VICEABLE P AR TS INSIDE. REFER SER VICING TO QUALIFIED SER VICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This sym[...]

1 Thank Y ou for Choosing Samsung Thank you for choosing Samsung! Y our new Samsung TV represents the latest in television technology . W e designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. W e are proud to offer you a product that will provide convenient, dependable se[...]

2 • Unplug the TV from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-line sur ges. • A void overhead power lines. An outside antenna system should not be placed in the vicinity of ove[...]

3 C ONTENTS Chapter 1: Y our New TV . . . . . . . . . . . . . . .1.1 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1 Familiarizing Y ourself with The TV . . . . . . . . . . . . . . . . [...]

4 C ONTENTS Chapter 4: Special Features . . . . . . . . . . . .4.1 Fine T uning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.1 LNA (Low Noise Amplifier) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.2 Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

1. 1 List of Features Y our TV was designed with the latest technology . This TV is a high-performance unit that includes the following special features: • Easy-to-use remote control • Easy-to-use on-screen menu system • Adjustable picture and sound settings that can be stored in the TV’ s memory • Automatic channel tuning for up to 181 c[...]

1. 2 Familiarizing Y ourself with The TV T op Panel Buttons The buttons on the top panel control your TV’ s basic features, including the on-screen menu. T o use the more advanced features, you must use the remote control. Y OUR N EW TV TV/VIDEO Press to display all of the available video sources. MENU Press to see an on-screen menu of your TV&ap[...]

1. 3 Y OUR N EW TV POWER INPUT CONNECTOR PC VIDEO INPUT Connect to the video output port on your PC. PC AUDIO INPUT Connect to the audio-output jacks on your PC. COMPONENT 2(DTV) Connect a component video/audio from a Set-T op Box. TV ANTENNA Connect to an antenna or to a cable TV system. COMPONENT 1(DVD) Connect a component video/audio from a DVD [...]

1. 4 Y OUR N EW TV Remote Control Y ou can use the remote control up to about 23 feet from the TV When using the remote, always point it directly at the TV . Power (Page 3.1) T urns the TV on and off. TV/VIDEO (Page 3.1 1) Press to display all of the available video sources. P. S T D (Page 3.8) Adjust the TV picture by selecting one of the preset f[...]

2. 1 Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat T win Leads,” below . If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on page 2.2. If you have two antennas, see “Separate VHF and UHF Antennas,” on page 2.2. Antennas wi[...]

2. 2 Connecting Cable TV T o connect to a cable TV system, follow the instructions below . Cable without a Cable Box 1 Plug the incoming cable into the TV ANTENNA antenna terminal on back of the TV . ¥ Because this TV is cable-ready , you do not need a cable box to view unscrambled cable channels. 2 Plug the combiner into the TV ANTENNA terminal o[...]

2. 3 I NST ALLA TION Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANTENNA OUT terminal on your cable box. ¥ This terminal might be labeled “ANT OUT ,” “VHF OUT ,” or simply , “OUT .”. 2 Connect the other end of this cable to the TV ANTENNA terminal on the back of the TV . Connecting [...]

2. 4 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch. 5 Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch. 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal o[...]

2. 5 I NST ALLA TION 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV . 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV . 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV . Follow the instructions in[...]

2. 6 I NST ALLA TION 3 Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV . An S-V ideo cable is usually included with an S-VHS VCR. (If not, check your local electronics store.) 1 T o begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV . Connec[...]

2. 7 I NST ALLA TION Note: For an explanation of Component video, see your DVD player owner's manual. Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV . 1 Connect a set of audio cables between the COMPONENT 1 L, R AUDIO INPUT jacks on the TV and the AUDIO OUT jacks on the DVD player . 2 Co[...]

2. 8 2 Connect an audio cable between the AUDIO OUTPUT jack on the camcorder and the AUDIO terminals on the back of the TV . 3 Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the VIDEO terminal on the back of the TV . 1 Locate the A/V output jacks on the camcorder . They are usually found on the side or back of the camcorde[...]

2. 9 I NST ALLA TION 3 Replace the cover . ¥ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV . (Assuming typical TV usage, the batteries last for about one year .) 2 Install two AAA size batteries. ¥ Make sure to mat[...]

3. 1 Chapter 3 O PERA TION T urning the TV On and Off Press the Power button on the remote control. Y ou can also use the Power button on the top panel. Viewing the Display The display identifies the current channel and the status of certain audio-video settings. ¥ The on-screen displays disappear after about ten seconds. Viewing the Menus and On-[...]

3. 2 O PERA TION Selecting a Menu Language 3 Press the VOL + button to select the appropriate language: English, Español, Français or Português. 4 Press the MENU button to exit the menu. 2 Press the CH ▼ button to select Language. Function Move Select Exit Sleep timer Off PIP Caption V-Chip Size Normal Language English 1 Press the MENU button [...]

3. 3 O PERA TION Memorizing the Channels Y our TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH ▲ and CH ▼ buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are [...]

3. 4 3 Press the VOL + button. The TV will begin memorizing all of the available channels. O PERA TION Storing Channels in Memory (Automatic Method) ¥ The TV automatically cycles through all of the available channels and stores them in memory . This takes about one to two minutes. Press VOL+ at any time to interrupt the memorization process and re[...]

3. 5 O PERA TION Changing Channels Using the Channel Buttons 1 Press the CH ▲ or CH ▼ buttons to change channels. When you press the CH ▲ or CH ▼ buttons, the TV changes channels in sequence. Y ou will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) Y ou will not see channels that were e[...]

3. 6 O PERA TION Adjusting the V olume 1 Press the - VOL or VOL + buttons to increase or decrease the volume. 1 Press MUTE and the sound cuts off. The icon “ ”(Mute) will appear in the lower-right corner of the screen. 2 T o turn mute off, press the MUTE button again, or simply press either the - VOL or VOL + button. Using Mute At any time, you[...]

3. 7 O PERA TION 1 Press the MENU button to display the menu. Press the VOL + button to display the Picture menu. Picture Move Select Exit Mode Custom Contrast Brightness Sharpness Color Tint Color T one Normal Customizing the Picture Y ou can use the on-screen menus to change the contrast, brightness, sharpness, color , tint and color tone accordi[...]

3. 8 O PERA TION Using Automatic Picture Settings Y our TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie” and “Custom”) that are preset at the factory . Y ou can activate either Dynamic, Standard or Movie by pressing P .STD (or by making a selection from the menu). Or , you can select “Custom” which automati[...]

3. 9 O PERA TION 2 Press the CH ▲ or CH ▼ button to select a particular item to be changed. Sound Move Select Exit Mode Custom Bass Treble Virtual Dolby : Off MTS Stereo 1 Press the MENU button to display the menu. Press the CH ▼ button to select “Sound”, then press the VOL+ button. Sound Move Select Exit Mode Custom Bass Treble Virtual D[...]

3. 10 Using Automatic Sound Settings Y our TV has four automatic sound settings (“Standard,” “Music,” “Movie” and “Speech”) that are preset at the factory . Y ou can activate any of them by pressing the S.STD button (or by making a selection from the on-screen menu). • Choose Standar d for the standard factory settings. • Choose[...]

3. 11 O PERA TION Viewing an External Signal Source Y ou must select the appropriate mode in order to view the external signal on the TV . Press the TV/VIDEO button. Y ou will switch between viewing the signals coming from equipment connected to the TV’ s A/V jacks, and the TV signal. Video 07-CHAPTER 3_en 2/25/03 9:28 AM Page 11[...]

4. 1 Fine T uning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Select the appropriate channel. 2 Press the MENU button to display the menu. Press the CH ▼ button to select “Channel”, then press the VOL + button. Channel Move Select Exit ANT/CA TV ANT Auto program Fine tune 00 Add/Erase : Erased LNA[...]

4. 2 S PECIAL F EA TURES LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 2 Press the CH ▼ button to select “LNA.” Channel Move Select Exit ANT/CA TV ANT Auto program Fine tune 00 Add/Erase : Erased LNA : Off 3 Pr[...]

4. 3 Freezing the Picture 1 Press the STILL button to freeze the main picture. • Not available if V -Chip is turned on. • Normal sound will still be heard. Press again to cancel. S PECIAL F EA TURES Changing the Screen Size For 480i(DVD, DTV) and TV , V ideo, S-V ideo 1 Press the ASPECT button to change the screen size. • Normal: Sets the pic[...]

4. 4 S PECIAL F EA TURES Special Sound Options Choosing a Multi-Channel Sound (MTS) Soundtrack Depending on the particular program being broadcast, you can listen to stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather .) 2 Press the CH ▼ butt[...]

4. 5 S PECIAL F EA TURES Virtual Dolby This feature allows the TV’ s L/R speakers to provide a home Theater-like V irtual Dolby effect. The center and surround sounds are mixed into the L/R speakers. 2 Press the CH ▼ button to select “V irtual Dolby”. Sound Move Select Exit Mode Custom Bass Treble Virtual Dolby : Off MTS Stereo 3 Press the [...]

4. 6 S PECIAL F EA TURES Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 10 to 240 minutes). 1 Press the MENU button to display the on-screen menu. Press the CH ▼ button three times to select “Function”, then press the VOL + button. Function Move Select Exit Sleep timer Off PIP Caption V-Chip S[...]

4. 7 S PECIAL F EA TURES ▼ Misspellings and unusual characters sometimes occur during closed caption transmissions, especially those of live events. There may be a small delay before captions appear when you change channels. These are not malfunctions of the TV . 3 Press the - VOL or VOL+ buttons to turn closed captioning on/off. Function Move Se[...]

4. 8 S PECIAL F EA TURES Viewing Picture-in-Picture Y ou can use the PIP feature to simultaneously watch two video sources. Note: PIP function operates only in the PC mode. Activating Picture-in-Picture 3 Press the VOL + button to select PIP “On.” ¥ If you turn the TV of f while watching and turn it on again, the PIP window will disappear . ¥[...]

4. 9 S PECIAL F EA TURES When you press the LOCA TE button repeatedly , the PIP window moves from corner to corner on the TV screen. Changing the Location of the PIP Window Press the SIZE button to alternate between a small, medium and large PIP window . Changing the Size of the PIP Window 1 Press the MENU button to display the menu. Press the CH ?[...]

4. 10 Using the V -Chip The V -Chip feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a PIN (personal ID number) before any of the V -Chip restrictions can be set up or changed. Setting Up Y our Personal ID Number (PIN) 1 Press the MENU button to display the menu. Press the CH ▼ butto[...]

4. 11 How to Set up Restrictions Using the “TV guidelines” First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating. How to Enable/Disable the V -Chip 1 Press the MENU button to display the menu. Pr[...]

4. 12 2 Press the CH ▼ button to select “V -chip”, then press the VOL+ button. The “Enter pin” screen will appear . Enter your 4-digit PIN number . Function 0~9 Select Exit V-Chip Enter pin * * * * 3 Press the CH ▼ button, to select “TV Guidelines”, then press the VOL+ button. Function V-Chip lock : Yes TV guideLines MP AA rating Ch[...]

4. 13 How to Set up Restrictions using the MP AA Ratings: G, PG, PG-13, R, NC-17, X The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies. (Eventually , movie videocassettes will be encoded with MP AA ratings.) When the V -Chip lock is on, the TV will automatically block any pr[...]

4. 14 How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V -Chip will block it. The screen will go blank and the following message will appear: “Excessive rating.” T o resume normal viewing, tune to a different channel using the number buttons. Under certain conditions[...]

5. 1 Chapter 5 PC D ISPLA Y Using Y our TV as a Computer (PC) Display How to Connect Y our PC to the TV Note: This figure shows the Standard Connector -jack panel. The actual configuration on your TV may be different, depending on the model. PC AUDIO INPUT Connect these to the audio-output jacks on your PC. PC VIDEO INPUT Connect to the video outpu[...]

5. 2 PC D ISPLA Y How to Set up Y our PC Software (Windows 2000) The W indows display-settings for a typical computer are shown below . However , the actual screens on your PC will probably look different, depending upon your particular version of W indows and your particular video card. Even if your actual screens look different, the same, basic s[...]

5. 3 Adjusting the Screen Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. Press the PC b[...]

5. 4 Changing the Screen Position Press the PC button on the remote control to select the PC mode. PC D ISPLA Y 1 Press the MENU button to display the menu. Press the CH ▼ button to select “PC”, then press the VOL + button. PC Move Select Exit Image Image lock Position Color adjust Recall Auto adjustment 1024x768 48.3kHz 59.9Hz 3 Press the CH[...]

5. 5 PC D ISPLA Y Changing the Screen Color Standard Press the PC button on the remote control to select the PC mode. 1 Press the MENU button to display the menu. Press the CH ▼ button to select “PC”, then press the VOL + button. PC Move Select Exit Image Image lock Position Color adjust Recall Auto adjustment 1024x768 48.3kHz 59.9Hz 2 Press [...]

5. 6 Adjusting the Screen Color Settings Press the PC button on the remote control to select the PC mode. 1 Press the MENU button to display the menu. Press the CH ▼ button to select “PC”, then press the VOL + button. PC Move Select Exit Image Image lock Position Color adjust Recall Auto adjustment 1024x768 48.3kHz 59.9Hz 2 Press the CH ▼ b[...]

5. 7 T o Initialize the Screen Position or Color Settings 1 Press the MENU button to display the menu. Press the CH ▼ button to select “PC”, then press the VOL + button. PC Move Select Exit Image Image lock Position Color adjust Recall Auto adjustment 1024x768 48.3kHz 59.9Hz 3 Press the CH ▼ button to select “Image recall” or “Color r[...]

5. 8 Adjusting the PC Screen Automatically Press the PC button on the remote control to select the PC mode. 1 Press the MENU button to display the menu. Press the CH ▼ button to select “PC”, then press the VOL + button. PC Move Select Exit Image Image lock Position Color adjust Recall Auto adjustment 1024x768 48.3kHz 59.9Hz 2 Press the CH ▼[...]

6. 1 If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply , call your nearest Samsung authorized service center . Identifying Problems Chapter 6 T ROUBLESHOOTING Problem Poor picture Poor sound quality . No picture or sound. No color , wrong colors or tints. Picture r[...]

6. 2 Problem “Not Supported Mode!” message. The image is too light or too dark. Horizontal bars appear to flicker , jitter or shimmer on the image. V ertical bars appear to flicker , jitter or shimmer on the image. Screen is black and power indicator light blinks steadily . Image is not stable and may appear to vibrate. Image is not centered on[...]

A. 1 Retractable Stand Note: The maximum tilt angle is 10 degrees in the backward direction. Please do not tilt the TV outside the specified range. Using excessive force to tilt the TV may cause permanent damage to the mechanical part of the stand. 0~10 Using the Anti-Theft Kensington Lock Cable Figure 2 Figure 1 The Kensington lock is a device use[...]

A. 2 Pin Assignments Pin D-Sub Connection A PPENDIX PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Separate H/V Red Green Blue GND GND (DDC Return) GND-Red GND-Green GND-Blue No Connection GND-Sync/Self T est GND DDC-SDA H_Sync V_Sync DDC-SCL Composite H/V Red Green Blue GND GND (DDC Return) GND-Red GND-Green GND-Blue No Connection GND-Sync/Self T est GND[...]

A. 3 A PPENDIX Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically . If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your V ideocard user guide; otherwise there may be no video. For the display modes listed below , the screen image [...]

A. 4 A PPENDIX Cleaning and Maintaining Y our TV W ith proper care, your TV unit will give you many years of service. Please follow these guidelines to get the maximum performance from your TV . Placement • Do not place the TV near extremely hot, cold, humid or dusty places. • Do not place the TV near appliances with electric motors that create[...]

A. 5 A PPENDIX Installing the W all Mount Kit (Sold separately) 1 2 3 4 11-APPENDIX_en 5/7/03 2:02 PM Page 5[...]

A. 6 A PPENDIX Specifications L TN1565 L TN1765 * Referring to Preset timing modes, page A.3. Panel *Frequency Display Resolution Input Signal V ideo Component Power Supply Power Consumption Dimensions/ W eight Environmental Considerations Audio Characteristics Size Display Size T ype Pixel Pitch V iewing Angle Horizontal V ertical Display Color Op[...]

User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfe[...]