HP (Hewlett-Packard) LE2002X инструкция обслуживания

HP Compaq LE1902x, LE2002x, LE2002xm, and LE2202x LED Backlit LCD Monitors User Guide[...]

© 2011 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademar ks of Microsoft Corporation in the U nited States and/or other countries. The only warrantie s for HP products and services are set forth in the express warranty statements accompanying such products and services. Not[...]

About This Guide This guide prov ides information on m onitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indi cates that failure to follow di rections could result in bodily harm or l oss of li fe. CAUTION: Text set off in this manner indicates that failure to follo w directions could result[...]

iv About Thi s Guide ENWW[...]

Table of contents 1 Produc t Feat ures ........ ......... ......... ............ ......... ............ .......... .......... ............ ......... ....... ..... ........... .......... ....... 1 HP LCD Monito rs ... ............. .......... ........... ......... .............. ........... .......... ........... ............ ....... .... ..........[...]

vi ENWW[...]

1 Product Features HP LCD Monitors The LCD (liquid crystal display) mo nitors have an active matrix, th in-film transistor (TFT) panel. The monitor models and fea tures include: ● LE1902x model, 47 .0 cm (18.5-inch) diagon al viewable area di splay with 1366 x 768 resolution, plus full-screen su pport for lower resolution s; includes custom scali[...]

● Intelligent M anagement AssetControl ● Compliant with the follo wing regulated specifications: ◦ European Union CE Directives ◦ Swedish TCO Requirements 2 Chap ter 1 Product Features ENWW[...]

2 Setting Up the Monitor To set up the monitor, en sure that the power is turn ed off to the mon itor, compu ter system, and other attached devices, then follow the instructions below. Attaching the Monitor Base 1. Lift the base from the monitor box and set it on a flat surface such as a table top. 2. Using both hands, lift the monitor from its b o[...]

Rear Components Figure 2 -2 Rear Compo nents Component Funct ion 1 AC Power Conn ector Connects the AC power cord to the monitor. 2 Audio Connector (select models) Connects the audio cable to the monitor. 3 DVI-D (select models) Connects th e DVI-D cable to the monitor. 4 VGA Connects the VGA cable to the monitor. 4 Chap ter 2 Settin g Up the Monit[...]

Connecting the Cables 1. Place the monitor in a convenient, well- ventilated l ocation near the computer. 2. Remove the cable managemen t clip from the pede stal by pul ling outward on the two sides of the clip (1) then lifting th e clip off the pedestal (2 ). Figure 2-3 Removing the Cable Manage ment Clip 3. Connect a VGA signal ca ble or DVI-D si[...]

5. Connect one end of th e power cord to the AC power connecto r on the back of th e monitor, and the other end to an electrical wall outlet. Figure 2-4 Connecting the Cables WARNING ! To reduce the risk of elec tric shock or damage to the equipme nt: Do not disable the power cord groun ding plug. Th e grounding pl ug is an importa nt safety featur[...]

Front Panel Controls Figure 2 -6 Monitor Front Panel Controls Table 2-1 Monito r Front Panel Control s Control Functi on 1 Menu Opens, selects or exits the OSD menu. 2 Minus If the OSD menu is on, press to navigate backwar d through the OSD menu and decrease adjustment levels. If the OSD menu is inactive, press to activate the volume adjustment bar[...]

Adjusting the Monitor Tilt the monitor' s panel forward or backwar d to set it to a co mfortable ey e level. Figure 2 -7 Tilting the Moni tor Turning on the Monitor 1. Press the power but ton on the comput er to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors [...]

Removing the Monitor Pedestal Base You can remove the monitor panel from the pedestal b ase to install the panel on a wall, a swing arm, or other mounting fixture. CAUTION: Before beginning to disassemble the monitor, be sure th e monitor is turned off and the power and signal ca bles are both disc onnected. 1. Disconnect and remove the signal and [...]

2. To attach the monitor to a swing arm, insert four 10m m screws through the hol es on the swing arm plate and into the mounting holes on th e monitor. Figure 2-9 Mounting the Monitor To attach the monitor to o ther mounting fixtur es, follow the i nstructions included with the mounting fixture to ensure that the monitor is sa fely attached. 3. Re[...]

3 Finding More Information Refer to the HP LCD Monitors Reference Guide included on th e CD with your monitor for add itional information on: ● Optimizing monitor performance ● Safety and maintena nce guidel ines ● Installing softwar e from the CD ● Using the OSD menu ● Downloadin g software from th e Web For additional informa tion on us[...]

4 Technical Specifications NOTE: All specifications represent the typical sp ecifications provided by HP's component manufacturer s; actual performa nce may vary either higher or lower. LE1902x Model Table 4-1 LE1902 x Specifications Maximum Weight (Unpacked) 2.8 kg 6.17 lbs Dimensions (include base) Height Depth Width 33.89 cm 12.6 cm 44.93 c[...]

LE2202x Model Table 4-3 LE2202 x Specifications Maximum Weight (Unpacked) 3.6 kg 7.94 lbs Dimensions (include base) Height Depth Width 37.9 cm 16 cm 51.8 cm 14.92 inches 6.3 inches 20.39 inches Maximum Graphic Resolution 1 920 x 1080 (60 Hz) analog input 1920 x 1080 (60 Hz) digital input Optimum Graphic Resolution 1920 x 1080 (60 Hz) analog input 1[...]

Table 4-5 Factor y Preset Modes (co ntinued) 2 720 × 400 31.469 70.087 3 800 × 600 37.879 60.317 4 1024 × 768 48.363 60.004 5 1280 × 720 45.00 59.94 6 1280 × 1024 63.981 60.02 7 1440 × 900 55.935 59.887 8 1600 × 900 55.935 59.887 LE2202x Model Table 4-6 Factory Pre set Modes Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 1 640 × 480 31.[...]

utilize .5 watts of power. There is a brief warm u p period before the monito r will return to its normal operating mode. Refer to the computer manu al for instru ctions on setting energy saver features (s ometimes called power management fea tures). NOTE: The above power saver feature only works when connected to compute rs that have energy saver [...]