Honeywell CT3600 инструкция обслуживания

69-1642 OWNER’S GUIDE ® U.S. Registered Trademark Copyright © 2002 Honeywell • •All Rights Reserved Honeywell CT3600/CT3697 PROGRAMMABLE THERMOSTAT Seven Day Programmable Heat and/or Cool Low V oltage (20 to 30 V ac) Thermostat and W allplate Model CT3600/CT3697 Para obtener un documento con las instru cciones en español, por favor visite [...]

69-1642 2 Total comfort temperature mana gement with Smart Response™ Technology. Congratulations! Y ou made a smart choice by purchasing your new Honeywell thermostat; the smart thermostat that; • Keeps you comfortable by automatically calculating exactly when the furnace or air conditioning should go on to have the house at the desired comfort[...]

3 69-1642 Time Set Program Run Program Hold Temp Set Current Day/Time Day Heat/Cool Settings Daylight Time Copy Usage System Fan Wake Leave Return Sleep Heat Off Cool On Auto M18635C RAISES TEMPERATURE SETTING LOWERS TEMPERATURE SETTING DISPLAYS CURRENT HEAT/COOL TEMPERATURE SETTING PROGRAM PERIODS WAKE/LEAVE/RETURN/SLEEP: ENTERS PROGRAMMING MOD E [...]

69-1642 4 M16421C Aux Ht System Off Auto WakeLeaveReturnSleep Mon Wait In Room Humid Outdoor Filter AM Hold for Repl Batt Recovery Cool Tue WedThu FriSatSun Days Set Program Set Day/Time Temporary Setting Em Heat Em Ht DISPLAYS EITHER CURRENT TIME OF DAY OR PROGRAM TIMES SHOWS THERMOSTAT IS IN THE SET DAY/TIME MODE SHOWS TEMPERATURE SETTING CHANGED[...]

5 69-1642 STEP 1. PREPARE FOR INSTALLATION ❑ Check T able 1, the compatibility chart, to make sure t he t hermostat is compatible with your system. If your system is not compatible, call Honeywell Custom er Relations Center , toll-free, 1-800-468-1502. T able 1. Compatibility Chart. a Compatible with 2-wire Honeywell and T aco zone valves. No t c[...]

69-1642 6 STEP 2. REMOVE OLD THERMOSTAT ❑ T est your heating and cooling systems to make sure they wor k properly . If either system does not wor k, contact your local heating/air-conditioning dealer . T o avoid compressor damage, do not operate th e cooling system when outdoor temperature is below 50°F (10°C). ❑ T urn off power to the system[...]

7 69-1642 STEP 3. MOUNT THERMOSTAT WALLPLATE ❑ Separate the wallplate from the thermostat by placing your thumb or fingers between the bottom of the wallplate and the thermostat, and pulling the wallplate up and away from the thermostat. See illustration at right. ❑ Position the wallplate on the wall. Level the wallplate for appearance if desir[...]

69-1642 8 STEP 4. WIRE WALLPLATE TERMINALS IMPORT ANT All wiring must comply with local codes and ordinances. If unsure about household wiring proc edur es, call your local heat- ing/air-conditioning contractor. Refer to the labels you placed on t he wires wh en you removed the old thermostat (see illustration). ❑ Match the letter of your old the[...]

9 69-1642 T able 2. T erminal Designations on Old and New Thermostat s a If both RH and R terminals are present on existing ther most at, remove jumper and connect Rh to R and R to Rc. b Do not connect both O and B when wiring to a single stage heat pump. Connect O to O. T ape off B. c T ape off end of the wire with electrical tape and push the tap[...]

69-1642 10 When the batteries are running low, a REPL BA T message flashes for one to two months before the batteries run out completely . R eplace the batteries as soon as possible once the message flashes. IMPORT ANT Although the thermostat has a low battery indicator , replace the batteries once per year to prevent leakage and to prevent the the[...]

1 1 69-1642 STEP 7. MOUNT THE THERMOSTAT STEP 8. CUSTOMIZE YOUR THERMOSTAT Y ou r Honeywell CT3600/CT3697 Thermostat comes preset to the most commonly used settings. The settings are: — Gas or oil forced air furnace. — Smart Response technology on. — T emperature °F . — 12-hour clock format. Y ou can change any or all of these settings. IM[...]

69-1642 12 — 3 = Hot water , high efficiency furnace (90% or better), or single stage heat pump. — 6 = Gas or oil forced air furnace (p reset). — 9 = Electric furnace. T o change you r system type: ❑ Press until display shows your furnace or boiler type. ❑ Press T ime to move to next feature or to return to main display . Smart Response?[...]

13 69-1642 T o change time f ormat: ❑ Press once. ❑ Press to return to main display . Factory Set Function (Feature Number 37) Do not change this setting. STEP 9. SET THE CLOCK Set Current Da y and Time NOTE: On initial power-up, the screen flash es 1:00 pm until you press a key . ❑ Press . ❑ Press until screen shows current day . ❑ Press[...]

69-1642 14 STEP 10. PROGRAMMING The keyboard is located behind the thermostat cover . T he three most frequently used keys are ne ar the display . Pressing displays the current temperature settings. Pressing the and keys change the temperature. T he thermostat displays day , time, program period, temperatur e and system settings. There is an indivi[...]

15 69-1642 T able 3 can be helpful when planning your schedule of time and temperature settings. The thermostat default settings are shown in parentheses ( ). T able 3. Personal Programm ing T able. a Y our heating setpoints cannot be higher than 90°F (32°C) or lower than 4 0°F (4.5°C). b Y our cooling setpoints cannot be higher than 99°F (37?[...]

69-1642 16 NOTE: Program times are in 15 minu te in tervals. For example, 8:00, 8:15, 8:30. ❑ Press or until the desired wake te mperature displays. The setpoint temperature range is 40°F to 90°F (4 .5°C to 32°C) for heating and 45°F to 99°F (7° C to 37°C) for cooling. ❑ Press to switch between setpoints. NOTE: Program times are the sam[...]

17 69-1642 ❑ Press until the display sh ows the day you want to copy to. ❑ Press to accept the change . ❑ Repeat these steps for each day you want to copy . NOTE: donE appears for two seconds and then the normal program display appears. Clear a Program Period NOTE: W ake canno t be cleared. ❑ Press , , or for the program period you want to [...]

69-1642 18 Change Temperature Setti ng Indefinitely (Hold) ❑ Move the System switch to the desired position (Heat or Cool). ❑ Press then or to change your setting if desired. (The disp lay chang es from showing the setpoint temperature to room temperature after app roximately three seconds). ❑ T o cancel “Hold” press . Change the Temperat[...]

19 69-1642 Usage Key ❑ Press once to display the hours and minutes that the heating or cooling system has been operating for the current day . ❑ Press a second time to display the system ope rati ng time for the previous day (midnight to midnight). ❑ Press a th ird time to display the system operating time since the last time the usage functi[...]

69-1642 20 IF YOU HAVE A PROBLEM T able 4. Solution Guide. If... Then… Display does not appear . • Make sure the batteries are installed correctly . • Make sure the thermostat is mounted and latched on the wallplate. Mount and latch the thermostat on the wallplate if it is not. T emperature settings w ill not change (example; cannot set the h[...]

21 69-1642 Customer Assistance Please read and follow the provided instructions for this the rmostat. For additional information, go to www .honeywell.com/yourhome or call our 24-hour au tomated information line at 1-800-468-1502. Before calling, please have the following information available : • Thermostat model number . (Located on back of the[...]

69-1642 22 WIRING DIAGRAMS THERMOSTAT 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. 1 HEATING RELAY OR VALVE COIL B R RC OW Y G 2-WIRE HEAT-ONLY (JUMPER INTACT) M1061 6 M1061 7 THERMOSTAT 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. 1 4-WIRE HEAT/COOL (JUMPER INTACT) HEATING RELAY OR [...]

23 69-1642 Notice: This thermostat is a Class B digita l app aratus that complies with C anadian Radio Interference Regulations, CRC c. 1374. M1061 9 THERMOSTAT 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. 1 1 5-WIRE HEAT/COOL (JUMPER REMOVED) HEATING RELAY OR VALVE COIL COOLING CONTACTOR COIL FAN RELAY B R RC OW Y [...]

Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. 69-1642 G .H. 7- 02 www .honeywell.com/yourhome Automation and Control Solutions Honeywell Honeywell Lim ited-Honeywel l Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 5 5422 Scarbo rough, Ontario M1V 4Z9 Limited One-Year Warranty Honeywell[...]