Hisense Group KF 346GWE инструкция обслуживания

- KF 346GWE - KF 346GWE Hisense Corporation INSTR UCTION INSTR UCTION MANU AL MANU AL - KF 256GWE - KF 256GWE SPLIT TYPE AIR CONDITIONER SPLIT TYPE AIR CONDITIONER[...]

RZA-0-1000-881-SM-0 Compact Size This model is smaller than its predecessors and yet offers the same capabilities. Microprocessor Controlled Operation The interior compartment of the remote control unit contains several features to facilitate automatic operation, clearly displayed for easy use. Simple One-touch Wireless Remote Control The remote co[...]

　　　 Contents 1 Page Alert symbol Caution statements Composition of the air conditioner Operation guide Care and cleaning Tips for energy saving Troubleshooting Schematic diagram Pardon not to inform you if the contents of the manual changes. 1 2 3 8 16 18 18 19 WARNING CAUTION 　 　　 Alert Symbols The symbol refers to a hazard or an unsaf[...]

　　　 Caution Statements WARNING WARNING WARNING CAUTION 2 1.Do not turn the air conditioner on and off from the power mains switch. Use the ON/OFF operation button. 2.Do not stick anything into the air outlet of the outdoor unit. This is dangerous because the fan is rotating at high speed. 3.Do not let the children play with the air conditione[...]

Air intake grille INDOOR UNIT Air outlet Remote control unit Drain hose Refrigerant tubes OUTDOOR UNIT Air outlet 　　　 Composition of the Air Conditioner 3 1.Diagram of Structure This air conditioner consists of an indoor unit and an outdoor unit. You can control the air conditioner with the remote control unit. NOTE Air Intake Air Outlet Remo[...]

INDOOR UNIT OPERATING lamp TIMER lamp POWER lamp POWER TIMER OPERATING HIGH POWER lamp REMOTE CONTROL receiver ON/OFF button 4 2.Introduction of the Indoor ControI Unit IMPORTANT : Avoid using radio equipment such as mobile phone near (within 1m) the indoor unit. Some radio equipment may cause maIfunction of the unit. If the troubIe happens, dis- c[...]

Displayed when one-hour OFF timer is enable Displayed when setting timer Displayed when setting temperature Displayed when transmitting data Displayed when temperature is shown Displayed when temperature setting is at the upper or lower allowable limits Displayed when Night Setback is running Displayed when main unit sensor is in use Symbols １小[...]

关 预约 1HR HIGH POWER ON/OFF TEMP ＯＮ ＯＦＦ AUT O 1 小时 x C 1HOUR 1HOUR FLAP ON OFF SET CANCEL A/C SENSOR BATTERY F AN SPEED MODE SENSOR A/C SENSOR button Transmitter Battery compartment (pull off the cover to expose the batteries.) (Cover closed) SET TEMP HOUR HOUR AUT O AUT O ACL SLEEP TEMP . setting button ON/OFF button MODE select[...]

:The air conditioner starts at the set time. The air conditioner stops at the set time. or :The air conditioner reduces the humidity in the room. direction to one of the six possible positions manually, or to select the The airflow direction can be set manually.(six positions) :The flap moves up and down automatically. :Press the FLAP button and se[...]

　　　 Operation Guide Ｂ ACL button 1. Slide the cover in the direction indicated by the arrow and remove it. 2. Install two AAA alkaline batteries. Make sure the batteries point in the direction m arked in the battery compartment. 3. Use a thin object such as the tip of a pen to press the ACL button. ¡ñ or when the remote control unit canno[...]

Operation with the Remote Control Unit(continued) C 1HR ON/OFF TEMP HIGH POWER FLAP ON OFF SET CANCEL SLEEP A/C SENSOR ACL BATTER Y FA N SPEED MODE STEP 3 STEP 2 STEP 5 AUTO AUTO STEP 4 STEP 1 NOTE Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is in the ON position. If the automati[...]

Adjusting the Fan Speed AUTO AUTO A. Automatic Simply set the FAN SPEED selector to the position. A microcomputer in the air conditioner automatically controls the fan speed when the mode is selected. When the air co nditioner starts operating, the difference between the room temperature (RT) and the set temperature (T) is detected by the microcomp[...]

Adjusting the Airflow Direction The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right. 2. Vertical 1. Horizontal ! CAUTION When the humidity is high, the vertical vanes should be in the front position during the cooling or dehumidifying operation. If the vertical vanes are positioned all of the way[...]

Night Setback / Simultaneous Use Energy Saving C 1HR ON/OFF TEMP HIGH POWER FLAP ON OFF SET CANCEL SLEEP A/C SENSOR ACL BATTER Y FA N SPEED MODE AUTO AUTO ● Night Setback Mode Night Setback Mode is used for saving energy. Press the SLEEP button in operation. The mark appears in the display. T o release the night setback function, press the SLEEPb[...]

ＯＮ HOUR HOUR Using the 12-Hour ON and OFF Timer C 1HR ON/OFF TEMP HIGH POWER FLAP ON OFF SET SLEEP A/C SENSOR ACL BATTER Y FA N SPEED MODE STEP 2 STEP 3 STEP 1 1.TIMER ON mode (Example) After the length of time set for TIMER ON elapses, the unit begins operating. The display depicted at left indicates that the air conditioner will begin operati[...]

Using the 1-Hour OFF Timer 14 C 1HR ON/OFF TEMP HIGH POWER FLAP ON OFF SET SLEEP A/C SENSOR ACL BATTER Y FA N SPEED MODE AUTO AUTO 1HOUR 1HOUR This function causes the unit to operate for one hour and then stop, regardless of whether the unit is on or off when this button is pressed. The indicator in the display indicates that this function is oper[...]

15 Special Remarks ● In the event of power failure,the unit will stop.When the power is resumed, the unit will restare automatically after three minutes. ● In cooling operation,some plastic parts may expand or shrink due to a sudden temperature change. In this event,a clicking sound may occur. This is normal,and the sound will soon disappear. ?[...]

Operation without the Remote Control Unit INDOOR UNIT 　　　 Care and Cleaning NOTE If you have lost the remote control unit or it has trouble, follow the steps below. 1.When the air conditioner is not running If you want to turn on the air conditioner, pressing the ON/OFF button once. 2.When the air conditioner is running If you want to turn of[...]

Care and Cleaning (continued) Anti-Mold Filter How to remove the anti-mold filter The anti-mode filter behind the air intake grille should be checked and cleaned at least once every three weeks. 1.Grasp both ends of the air intake grille and pull it out and up. 2.Push the anti-mold filter up slightly, and then pull it down. Air intake grille Anti-m[...]

　　　 Tips for Energy Saving Do not ● Block the air intake and outlet of the unit. If they are obstructed, the unit will not work well, and may be damaged. Let sunlight directly into the room. Use sunshades, blinds or curtains. If the walls and ceiling of the room are warmed by the sun, it will take longer time to cool the room. ● Do ● Al[...]

　　　 Schematic Diagram 2. Refrigerant Flow Diagram KF-346GWE AC,220V-230V/60HZ 1250W 3400W 。 8m/80 15m 3 450m /h R22/1.22kg 1. Main specifications of the product Type Power source Power consumption of input Power Air flow (high) Refrigeration dose/consumption Maximum remote control range/ angle range Maximum length of the connect tube 19 KF-[...]

4. Electric Wiring Diagram Outdoor Intdoor 20 ＦＡＮ　ＭＯＴＯＲ 1 2 3 4 5 1 2 3 4 5 123 12 12 12 12 1~8 1~8 135 135 123 1 2 1 2 1 2 1 2 ROOM COIL SU COM CM FLAP FM PULSE IN SW PRY SEC 0 1 2 3 4 5 TRANSFORMER SENSOR SENSOR PLUG EVAPORAT OR TERMINAL TO OUTDOOR UNIT FLAP MOTOR CONTROL BOARD SWITCH ASSY YL W/GRN YL W/GRN BRN BRN BRN BRN BLU B[...]

P ACKING LIST NO. NAME AMOUNT PACKING LOCA TION 1. 2. 3. 4. 5. 6. 7. 8. 9. OUTDOOR UNIT POWER CABLE DRAINAGE ELBOW * AIR FRESH FIL TER INDOOR UNIT INSTRUCTION MANUAL INSTALLA TION MANUAL REMOTE CONTROL UNIT BA TTERY 1 1 1 1 1 1 1 1 2 OUTDOOR OUTDOOR OUTDOOR OUTDOOR INDOOR INDOOR INDOOR INDOOR INDOOR SYMBOL "*" ST ANDS FOR THE PAR T TO BE [...]