Harbor Freight Tools 99640 инструкция обслуживания

3-IN-1 FLOORING NAILER/ST APLER CLEA T & ST APLE TYPE 99640 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2008 by Harbor Freight T ools ® . All rights reserved. No portion of thi[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if produc[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 3 Personal safety a. Stay alert. Watch what you are do- ing and use common sense when operating the tool. Do not use the tool while tired or under the inu - ence of drugs, alcohol, or medica- tion. A moment of inattention while operating the tool increases the risk of injury to [...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 4 f. Carry tool safely . Carry tool by handle. g. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is unstable and is able to lead to loss of control. h. Do not force the tool. Use correct too[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 5 SYMBOLS AND SPECIFIC SAFETY INSTRUCTIONS Symbol Denitions Symbol Property or statement n o No-load speed .../min Revolutions or reciprocation per minute PSI Pounds per square inch of pressure ft-lb Foot-pounds of torque BPM Blows per minute CFM Cubic Feet per Minute ow SCFM[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 6 6. Attach all accessories properly to the tool before connecting the air sup- ply . A loose accessory may detach or break during operation. 7. Obey the manual for the air compres- sor used to power this tool. 8. Install in-line shutoff valve to allow immediate control over air su[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 7 SPECIFICA TIONS Air Pressure Range 70-120 PSI Maximum Air Pressure 120 PSI Air Inlet 1/4” -18 NPT Fastener Capacity and Size Range 120 1/2” Crown Flooring Staples Length: 1-1/2” to 2” Gauge: 15 1/2 Ga 100 “L” or “T” T ype Flooring Cleats Length: 1-1/2” to 2” G[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 8 1. Incorporate an in-line oiler , shut-off valve, regulator with pressure gauge, and lter for best service, as shown in the diagram above. An in-line shut- off valve is an important safety device because it controls the air supply even if the air hose is rup- tured. Note: If a[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 9 T o Attach An Air Connector: 1. Attach a 1/4” Connector (not includ- ed) to the Adapter (82) prior to opera- tion. 2. Wrap about 3” of pipe thread seal tape (not included) onto threads of the Connector before attaching it to the Adapter . OPERA TING INSTRUCTIONS Read the ENTI[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 10 3. Push Side Load Magazine forward and press Lock to unfasten Pusher . Loading Staples: 1. Pull the Pusher (56) back to the end of Magazine (52). Lock Pusher in place by using Safety Lock (54). Then pull Side Load Magazine (61) back. 2. Place a full clip of 1/2” Crown Staples [...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 1 1 hardwood ooring. T o change the Spacer: a. Empty the Magazine (52) complete- l y. b. Attempt to re the Floor Nailer into a piece of scrap wood to ensure that it is disconnected and is incapable of ring any nails/staples. c. Set the tool on its side to expose the three [...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 12 store the tool in a clean, dry , safe location out of reach of children. USER-MAINTENANCE INSTRUCTIONS Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: T urn off the t[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 13 T roubleshooting Problem Possible Causes Likely Solutions Air leaking in Head Cap (5). 1. Loose Bolt (3). 2. Lock Ring (1 1) is cracked or worn. 1. T ighten and recheck. 2. Replace Lock Ring. Lack of power . Slow to cycle. Low power when shooting and returning. 1. T ool is too d[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 14 P ARTS LIST Part Description Q’ty 1 Hammer 1 2 Hammer Face 1 3 Hex. Bolt 1 4 Head Cap 1 4a Spring 1 5 O-Ring 1 6 Lining Ring 1 7 Hex. Bolt 3 8 Spring W asher 3 9 Poppet Actuator 1 10 Retainer Ring 1 11 Lock Ring 1 12 O-Ring 1 13 O-Ring 1 14 Poppet Actuator Lining Ring 1 16 Cyl[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 15 ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not avail- able individually as replacement parts. Please N[...]

SKU 99640 For technical questions, please call 1-800-444-3353. Page 16 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the dat[...]