Haier HWMP65-918 инструкция обслуживания

Automatic Washing Machine User manual This manual is for HWMP55-918 HWMP65-918 Please read this manual carefully before using. Retain for future reference.[...]

CONTENTS 1 Safety Precautions 2-3 Installation and A djustment 4 Installation 5 Installation water inlet hose 6 Before washing 7 Detergent 9-13 4 T rouble-shooting 15 Packing list 17 Specifications 18 Product Overview of drainage hose of usage guide Operation & W ash Cycles Loading your laundry 8 Maintenance 1 8[...]

Drain connector Inner tub Detergent box T op lid Balance ring Lint filter (HWMP55-918) Pulsator Cabinet Adjustable leg Fixed leg Back cover 1 Pr oduct Ove r view Contents marked with this symbol are related to the safe use of the product and the personal safety of the user . Please operate in accordance to the contents of this manual, to avoid harm[...]

Saf ety Prec autions The ventilation holes at the bottom Soft object Back Front A separate, earthed power socket is required for the power supply. Hold the plug - NOT the electric cable - when unplugging the washing machine. Do not insert or remove the power plug with wet hands.After installation of the washing machine, the power plug should be acc[...]

Safety precautions 3 Do not leave hot or heavy items on lid or control panel as this may cause damage to the washer or make the washer unsafe to operate Do not attempt to move washing or place hands inside washing machine while in operation. Please ensure children are supervised around machine to avoid harm. Do not wash laundry with chemicals or ot[...]

Install the bottom plate 4 Please install and adjust the machine according to the directions contained in this manual. It is very important to follow these directions for the safe operation of the machine, and to ensure your machine operates correctly . Installatio n & Adjustment Balance washing machine After removing washer from outer packagin[...]

5 Installa tion of d ra ina ge hose Install draina ge hose First connect the drainage hose to the connection point on the lower left side of the cabinet, and fasten with drain hose hoop (provided). Connect drain hose guide on to the outside of drainage hose. T o guide the drain hose over the tub or standpipe the hose guide MUST be fitted to the dra[...]

6 1. Insert a new flat washer into each end of the inlet hose. 2. Connect the water inlet hose to the water faucet. You may have to use pliers to tighten the coupling. Do not over tighten as this may cause damage to the valve or hose fittings. 3. Connect the other ends to their respective cold and hot water inlet valves located on the top of the wa[...]

7 Bef or e washing Preparation 1. Ensure the water inlet hoses are correctly installed and faucets are turned on. 2. Insert the power plug into the electrical socket. 3. Ensure the drain hose is mounted at the correct height. 4. Select a suitable location for the washer on a hard, even Surface, away from direct sunlight or heat sources, e.g. Radiat[...]

Load the laundry The rated washing capacity refers to the largest dry weight of a load that can be washed. The thickness, size and type of clothes will influence the actual capacity . Do not select more than W ater Level 4 for clothes less than 1.0kg, to avoid splashing of water. It is recommended that low suds/High efficiency detergent is used. De[...]

Operation & Wash Cyc les 9 G F E D C B A Long Medium Rapid Express Indicator display On Indicates the program is about to run and indicates the selected cycle and options Flashing Indicates the program is running and indicates the selected cycle and options Remaining time display D isplays - during Fuzzy Logic detection cycle until level is det[...]

C Delay button B Wash Rinse Spin button The display shows the time remaining (in minutes) before the cycle will finish. Push the "Delay" button and the display will show the remaining time for the cycle to finish (in hours). The indicator flashes to indicate that the delay function is operating. Delay start can be set for 2-24hr operation[...]

11 Button Operation and Descriptions 1 2 Cycle When the power is switched on "Normal" cycle is automatically set. T o select a different automatic cycle, press the "Cycle" button till the corresponding indicator is on. Refer to the section on the "Cycle" button above. E.g choose "Quick" cycle for a small load[...]

12 3 Wash Rinse Spin For the "Synthetic"and "Memory" cycles the machine will run a Fuzzy Logic program that automatically detects the type of laundry in the tub. After detection it will set the water level automatically. The water level can only be changed once the machine has started by pushing the "Start/Pause" butto[...]

Ãê 7 Press the button to start the cycle If the top lid is opened while machine is in SPIN cycle, the machine will stop and an audible alarm will sound. ˜Ñ Cycle completed The energy test program was performed using the "Normal" cycle default setting of: Wash "Long" Rinse:1 Rinse Spin:7 mins Water level:10. Please use low su[...]

Remove and clean the detergent box, replace after cleaning. The lint filter must be used during washing. It must be cleaned after each use Lint filter: 1. Slide upwards to remove. 2. Gently push it down to install; ensuring it is in place before next wash. remove Install Dismantle Install The filter at the water inlet valve may become blocked by im[...]

15 T r ouble-shooting If there is a fault or the machine does not operate correctly, remove the power plug before checking the machine. Using diagnostic list below, please check the machine requires repair. If a repair is required, please contact our Customer Care T eam, do not try to fix it yourself. The machine does not spin. The display shows E3[...]

There maybe water in the drain hose in when first used. It maybe residual water after performance inspection by the factory . Common occurrences Situation Cause The spinning is intermittent after it starts. The wash procedure pauses. Select spin program, but it does not work. Redistribute the load evenly . Close the top lid. The cloth sensor is det[...]

Packing list 17 Automatic washing machine Between the upper cushion of the washing machine package and the upper seal of the package carton. Bottom plate Inside Accessory b ag One T ap ping screws User manual Inside the document bag One Name Quantity Storage position Drain hose Drain hose Guide Drain hose Clamp Tw o Components of the water inlet ho[...]

Specifica tions Model Rated voltage/frequency Rated washing power Rated spinning power Net weight Gross weight Dimensions (mm) HWMP55-918 220-240V 50Hz 380W 340W About 32.5kg About 37.5kg L 520 W 530 H 900 Water inlet pressure Type Fully Automatic Washing Machine Water level/Water Quantity(approx) 1/14 L 2/18L 3/22L 4/26L 5/30L 6/34L 7/38L 8/43L 9/[...]