Grizzly G9003 инструкция обслуживания

COPYRIGHT ©2000 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. APRIL, 2000 PRINTED IN U.S.A. 3 3 ⁄ 16 " PORTABLE PLANER MODEL G9003 INSTRUCTION MANUAL[...]

G9003 Portable Planer -2 -[...]

G9003 Portable Planer -3 - SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially h[...]

G9003 Portable Planer -4 - 9. USE PROPER EXTENSION CORD for the tool. Make sure your exten- sion cord is in good condition. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheatin[...]

G9003 Portable Planer -5 - 1. USE ONLY FOR WOOD. This machine is not designed to process any material other than wood. 2. ALWAYS KEEP FINGERS AND HANDS AWAY FROM ROTATING CUTTERHEAD. Never attempt to clear chips away from the base of the chip chute when the machine is running. Stop the machine, unplug it, then clear away the debris. 3. NEVER OPERAT[...]

G9003 Portable Planer -6 - CONTROL LOCATION Control Location Refer to Figure 1 for the location of the key components and controls of this Planer. Become familiar with the controls and the adjustments before operating the Planer. Fig 1. Location of controls. ON/OFF Trigger Power Cord Belt Cover Fence Lock Front Foot Fence Rear Foot Trigger Lock Dep[...]

G9003 Portable Planer -7 - The Planer comes with the blades already installed. Check the blades before the first use to make sure they are set properly. To Check Blade Height Setting: 1. Lay a straightedge across the Rear Foot and the Cutterhead. Do not position the straightedge so it contacts the Front Foot. See Figure 2 . BLADE ADJUSTMENT & R[...]

G9003 Portable Planer -8 - BLADE INSTALLATION The Blade must be mounted to the Back Plate using the Blade Setting Jig. Using this jig controls how far the blade extends from the Cutterhead once it is installed. 1. Place the Blade onto the Setting Jig. 2. Lay the Back Plate onto the top of the Blade, pushing it up firmly against the edge of the Jig.[...]

G9003 Portable Planer -9 - The Blade must be completely removed from the Planer and from the Back Plate in order for it to be safely sharpened. Follow the preceding instructions for Blade Removal. For the best results, have planer blades sharpened by a professional sharpening service which has the grinding and mea- surement equipment to assure that[...]

G9003 Portable Planer -10 - Setting Cutting Depth Lay a straightedge across the Rear Foot and extend it across the Front Foot. Rotate the cutterhead so neither of the blades are touching the straightedge. Turn the Depth Adjustment Knob until the Front and Rear plates are at the same height (the straight- edge will contact both feet evenly). This is[...]

G9003 Portable Planer -11 - Chamfering The Front Foot has a V-groove machined into it to allow for edge chamfering. Position the Planer on the corner of the workpiece, with the V-groove seated on the corner. See Figure 7. Be sure the workpiece is firmly secured with clamps or other holding devices. Start the Planer and let it get to full speed befo[...]

G9003 Portable Planer -12 - Maintenance Your 110 V Portable Planer will give you hundreds of hours of operation time before ever needing service. This product is dou- ble insulated which provides protection from electrical shock should a problem ever develop with grounding. Great care must be taken whenever servicing double insulated equipment to m[...]

G9003 Portable Planer -13 - OPERATING TIPS Disassembly and improper reassem- bly of this device can result in electri- cal shock danger. Always have this device serviced by a qualified electri- cal repair technician. Serious injury will result. Operating Guides and Tips Avoid overloading the planer. Do not apply downward pressure to the tool while [...]

G9003 Portable Planer -14 -[...]

-15 - G9004 Portable Planer 001 P9003001 Pan Hd Screw M4 x 16 002 P9003002 Chip Cover 003 P9003003 Knob 004 P9003004 Scale Plate for Knob 005 P9003005 Flat Washer 10mm 006 P9003006 Main Frame 007 P9003007 Rivet 008 P9003008 Name Plate 009 P9003009 Cord Guard 010 P9003010 Cord 011 P9003011 Strain Relief 012 P9003012 Pan Hd Screw M4 x 18 013 P9003013[...]

G9003 Portable Planer -16 - TROUBLESHOOTING SYMPTOM Motor will not start. Motor will not start; fuses or circuit breakers blow. Motor overheats. Motor arcing visibly through vents or runs erratically. Machine slows when operating. Machine is loud when cutting. Overheats or bogs down in the cut. Planer starts, but cutter- head does not move. Planer [...]

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ MODEL # G9003 Portable Planer__ Order # _______________________ The following information is gi[...]

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend:[...]

G9003 Portable Planer -19 - NOTES[...]

G9003 Portable Planer -20 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance. This is Grizzly’s sole written[...]