Graco HTX 313888B инструкция обслуживания

Operation HTX 2030 -For P ortable Airless an d Air-Assiste d Spraying of W ater -Based Ar chitectural Coatin gs with Base Coat Pump- -For Airless Spra ying Archit ectural Coatings and Paint s with T op Coat Pump- Model Number: 257369 Maxim um W orking Pressure: Base Coat Pump: 1000 psi (69 bar , 6.9 MP a) To p C o a t P u m p : 3300 psi (228 bar , [...]

Contents 2 313888B Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 W arning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Produc t Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 5 HTX 2030 with Base Coat Pump (257369) . . . . . 5 T op Coa t Pump (Kit 24 B140) . . . . . . [...]

Warning 313888B 3 Wa r n i n g The f ollowing warnings are for t he setup, use, groundi ng, maintenance, and repair of this equipment. The exc lamation point symbol alerts you to a general warnin g and the hazard symbol ref ers to pr ocedure-spe- cific risk. Ref er back to these warnin gs. Additional, produ ct-specific warnings may be found thr oug[...]

Warning 4 313888B PRESSURIZED ALUMINUM P ARTS HAZARD Do not use 1,1,1-trichloroethane, me thylene ch lor ide, other halogenated hydrocar bon solvents or fluids containing such solv ents in pressurized alum inum equipment. Such use can cause serious chemical reaction and equipment rupture , and result in dea th, serious injur y , and property damage[...]

Product Overview 313888B 5 Pr oduct Over vie w HTX 2030 with Base Coat Pump (257369) The HTX 2030 Spra yer comes equ ipped with a Base Coat Pump 24B321. On ly water-based mat er ials are to be used with this configur ation, such as: • Smooth to heavily aggr egated textures with silica sand, perlite, v ermiculite and polystyrene • Smooth, medi u[...]

Product Overview 6 313888B T op Coat Pump (Kit 24B140) The pump on the HT X 2030 Spra yer ca n also be s witch ed out with a T op Coat Kit 24B140 (purc hased separately) . This pump is used f or less viscous materials such as: • Oil-based coatings •E n a m e l s •L a t e x • Block fillers • Elastomerics • Epo xies • Dr ywall mud • O[...]

Component Identification - Sprayer 313888B 7 Component Identification - Spra yer ti14415a 1 2 3 4 5 7 8 11 10 9 6 T op Coat Kit 8 12 1 ON/OFF Switch 2 Prime Switch (used with Base Coat Pump) 3 Pump Control Knob 4 Heavy T e xture Mater ial Hose (used with Base Coat Pump) 5 Applicator Switch (used with Base Coat Pump--on Hose 5) 6 Applicator (Base Co[...]

Component Identification - Base Coat Applicator 8 313888B Component Identification - Base Coat Applicator ti14357a 1 2 3 4 5 6 9 10 7 8 11 1 Applicator 2 Air Hose Adapter and Air Adjustment V alve 3 Airless Filter or Air P assage Plug 4 Filter Suppor t 5 Airless Spray Assemb ly 6 Airless Spray Tip Nozzle 7 Air nozzle, 4 mm, 6mm, 8mm, 10mm 8 Air Noz[...]

Pressure Relief Procedure 313888B 9 Pressure Relief Pr ocedure Applicator (Base Coat Pump) 1. T ur n engine OFF . 2. T ur n on/off switch OFF and tur n pre ssure control knob fully counterclockwise. 3. T ur n prime/drain v alve down to DRAIN position. Fluid from dr ain valv e can splash in ey es or skin and cause serious injur y . K eep hands clear[...]

Start Engine 10 313888B Star t Engine 1. Mov e fuel v alv e to OPEN. 2. Move choke to CLOSED . 3. Set thrott le to F AST . 4. Set engine switch to ON. 5. Pull star ter rope. 6. After engine st ar ts , mov e choke to OPEN. 7. Set throttle to desired setting. ti5248a ti5249a ti5250a ti3315a ti5263a ti5264a ti5251a[...]

Setup 313888B 11 Setup 1. Fill mixing pail with pre-mi xed te xture material. Mix per material manuf acturer instructions. Add approxim ately 10% water to te xture mix or per materia l manufacturer instr uctions. Mix thoroug hly. 2. Connect material hose to pump outle t. Material and Spray er Preparation NO TE: T o minimize material pack- out in ho[...]

Setup 12 313888B 5. T ur n on/off switch OFF and tur n drain valve knob to SPRA Y . 6. T ur n on/off s witch ON, and run pump until a steady stream of ma ter ial flows from mate rial hose. T ur n on/off switch to OFF and tur n drain valv e kno b to DRAIN. 7. Connect applicator t o material hose. Spray With Airless Tip 1. Install filter and tip exte[...]

Setup 313888B 13 Air Assisted Spray (Base Coat Applicator) 1. Prepare material, page 11. Place material hose in supply pail. 2. T ur n on/off s witch OFF . 3. Remov e cap before installing air line. 4. T ur n air valv e OFF . Connec t applicator to mater ial hose and air hose . Air supply minimum require- ments v ar y with material thickness and de[...]

Setup 14 313888B Spray Gun (Top Coat Pump) 1. Lock gun trig ger safety . Inse r t seat an d OneSeal ™ . Inser t SwitchTip. 2. Screw assembly onto gun. Hand tighten. 3. T rigger gun and spra y test patter n. Slowly adjust pressure to eliminate hea vy edges. Use smaller ti p size if pressure ad justment ca n not elimin ate heavy edges . 4. Hold gun[...]

Cleanup 313888B 15 Cleanup 1. T ur n on/off s witch OFF . 2. P erform Pressure Reli ef proc edure, page 9. 3. Place pump in pa il of clean water . 4. Shut OFF air if spr aying with ai r . Remov e applicator from mate rial an d air hoses. 5. Base Coat Pump: Disconnect material hose from pump outlet . 6. Inser t wet cleaning ball into h ose (Base C o[...]

Cleanup 16 313888B 9. Run pump un til cleaning ball exits material hose. Sav e cleaning ball (Base Coat On ly). 10. T ur n on/off s witch OFF and turn prime/drain v alve t o DRAIN. Clean outsid e of pump and suction tube with brush and water . 11. Connect applicat or to material hose. Close prime/drain v alve . 12. T ur n on/off s witch ON. Base Co[...]

Cleanup 313888B 17 19. Clean hardened material from applicat or nozzles with air nozzle cleaner . ti11810a ti11811a NO TICE Do not use air nozzle cleaner to clean applica tor check v alve or airless spra y tip nozzle. Damage will occur . Remove air chec k valve fr om applicator to c lean hard ened material from interior of applicator . ti13642a[...]

Digital Tracking System (DTS) 18 313888B Digital T rac king System (DTS) Main Menu Close cov er when spraying to protect disp la y . 1. P erform Star tup steps 1 - 2. • Open drain v alve • T ur n pump control counterclockwise to lo west set- ting • Set applicat or switch to OFF 2. Start Engine , page 10. Displa y will momentar ily show which [...]

Digital Tracking System (DTS) 313888B 19 Secondary Menu - Stored Data Mode • Open drain v alve • T ur n pump control counterclockwise to lo west set- ting • Set applicat or switch to OFF 1. Star t Engine, pag e 10. Pressure displa y appears . 2. Press and hold DTS b utton and turn applicator s witch ON. 3. SERIAL NUM scro lls through display [...]

Digital Display Messages 20 313888B Digital Displa y Messages * Error codes also appear on control board as a blinking red LED . LED is an alter nate to digital me ssages. 1 Remov e two screw s (71) and swing down co ver (130). 2 Star t engine . Blink count is the same as error code(E=0 X). After a f ault, follow these steps to restar t spra yer : [...]

Maintenance 313888B 21 Maintenance DA I L Y • Check engine oil le vel and fill as necessar y • Chec k hose fo r wear and damage • Chec k that all hose fittings are secure • Chec k gun safet y for prope r operation • Check and fill the gas tank • Chec k lev el of TSL in displacement pump pac king nut. Fill nut, if necessary . Keep TSL in[...]

Technica l Data 22 313888B T e chnical Data Dimensions Honda GX 200 Engine: ANSI P ower Rating @ 3600 r p m 6.5 Horsepower (4.8 kW) Maximum W orking Pressure: Base Coat Pump 1000 psi (69 bar , 6.9 MPa) T o p Coat Pump 3300 psi (228 bar , 22.8 MP a) Noise Level: Sound P ower 105 dBa per ISO 3744 Sound Pressure 96 dBa measured at 3.1 ft (1 m) Maximum[...]

Technical Data 313888B 23[...]

Graco Standard Warra nty 24 313888B Graco Standar d W arranty Graco warrants all equipment ref erence d in this document which is manufactured b y Graco and bearing its nam e to be free from de fe c t s i n material and workmanship on the date of sale to the origin al purch aser for use. With the e xception of any special, extended, or limited warr[...]