Graco 3A0410D инструкция обслуживания

Operation Husky ® 3300 Air -Operated Diaphra gm Pump 3A0410D EN Heavy-duty 3-inc h pump with large flo w paths for fluid transf er applications, inc luding high-viscosity materials. For professional use onl y . See page 4 for model inf ormation, including appr ov als. 125 psi (0.86 MP a, 8.6 bar) Maximu m Wo rking Pressure, Alumin um or Stainless [...]

Related Manua ls 2 3A0410D Contents Related M anuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 T o Order a New Pump . . . . . . . . . . . . . . . . . . . . . . . 3 T o Order Replacement Parts . . . . . . . . . . . . . . . . . 3 Distributor Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Configuration Number Matrix . . .[...]

To Find Your Nearest Distributor 3A0410D 3 T o Find Y our Nearest Distrib utor 1. Visit www .graco .com . 2. Click on Where to Buy and use the Distributor Locator . T o Specify the Configuration of a Ne w Pump Please call y our dist ribut or . OR 1. Use the Online Husky Sel ector T ool at wwwd.graco .com/training/husky/inde x .html. 2. If the link [...]

Configuration Numb er Matrix 4 3A0410D Configuration Number Matrix Chec k the identification plate (ID) f or the 20-digit Configuration Number of y our pump . Use the follo wing matrix to define the components of y our pump . Sample Configuration Number: 3300A-A01AA1 TP A CTPBN * Models with Buna-N, FKM Flu oroelastomer or TPE se ats do not use o-r[...]

Warnings 3A0410D 5 Wa r n i n g s The f ollowing w arnings are fo r the setup , use , grounding, maint enance, and repair of this equipment. The e xclama- tion point symbol ale r ts you to a gener al warning and the hazard symbols ref er to procedure-specific risks. When these symbols appear in the body of this man ual, ref er ba c k to these W ar [...]

Warnings 6 3A0410D EQUIPMENT MISUSE HAZARD Misuse can cause death or serious injury . • Do not oper ate the unit when fa tigued or under th e influence of drugs or alcohol. • Do not e xceed the maxim um working pressure or te mperature r ating of the lo west r ated system component. See T echnical Da ta in all equipment man uals. • Use fluids[...]

Warnings 3A0410D 7 T O XIC FLUID OR FUMES HAZARD T o xic fluids or fumes can cause serious injur y or death if splashed in the e y es or on skin, inhaled, or swa ll ow e d . • Read MSDSs to kno w the specific hazards of the fluids y ou are using. • Route e x haust a wa y from work area. If diaphr agm ruptures, f luid ma y be e xhausted into t h[...]

Installation 8 3A0410D Installation Overview The T ypical Installation shown in F IG . 1 is only a guide f or selecting and installing system components. Contact your Gr aco distributor f or assistance in planning a sys- tem to suit your needs. Reference letters in the text, f or e xample (A), r ef er to the callouts in the figures. Key: Accessorie[...]

Installation 3A0410D 9 Tighten F asteners Bef ore mountin g and using the pump f or the first time, chec k and retorq ue all e xternal f asteners . F ollo w T orque Instructio ns , page 14, o r see the torque tag on yo ur pump . After the f irst da y of opera tion retorque the f asteners . Mount the Pump 1. V er ify that the bolts ho lding the pump[...]

Installation 10 3A0410D Solvent container s used when flushing: F ollow local code. Use only conductiv e metal containers, placed on a grounde d surf ace. Do not place the container on a non- conductive surface , such as paper or cardboard, which interrupts groun ding continuity . Check yo ur syste m electr ical cont inuity after th e initial insta[...]

Installation 3A0410D 11 Air Exhaust V e ntilation . T o provide a remote exhaust: 1. Remov e the muffler (U) from the pu mp air e xhaust por t (K). 2. Install a grou nded air e xhaust hose (S) a nd connect the muff ler (U) to the othe r end of the hose . Use muffler PN 111897, sold separ ately . The minimum size f or the air e xhaust hose is 1 in .[...]

Operation 12 3A0410D Operation Pressure Relief Pr ocedure 1. Shut off the air supply to th e pump . 2. Open the dispensing v alv e, if used. 3. Open the fluid dr ain v alv e (F) to relie v e fluid pres- sure. Ha ve a container r eady to catch the dr ainage . Flush the Pump Bef ore Fir st Use The pump w as tested in wa ter . If water could contami- [...]

Operation 3A0410D 13 Pump Shutdown At the end of the w ork shift and bef ore y ou chec k, adjust, clean or repair the system, follow the Pressure Relief Pr ocedure , page 12. Maintenance Maintenance Schedule Estab lish a pre v entiv e maintenance schedule ba sed on the pump’ s ser vice histor y . Scheduled maintenance is especially impor tant to [...]

Operation 14 3A0410D T or que Instructions See F IG . 5 fo r fluid cov er and air valv e fastener s. See F IG . 6 f or manif old fasten ers. NO TE: Fluid cov er and manifold f asteners on the poly- propylene pumps hav e a thread-locking adhesive patch applied to the threads. If this pa tch is excessiv ely wor n, the f asteners ma y loosen during op[...]

Operation 3A0410D 15 F IG . 6. T orque Instructions - Manifold F asteners Polypropylene ti16564a 10 9 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1-8 Aluminum ti16559a 12 11 10 9 14 13 15 16 1-8 12 5 1 4 8 10 11 6 3 2 7 9 Stainless Steel ti17457a[...]

Aluminum Pump Dimension s 16 3A0410D Aluminum Pump Dimensions ti16557a ti16558a ti16559a A B D C E F G Air Inlet (opposite side from muffler) H J K L M A 24.50 in. (62. 2 cm) B 28.63 in. (72. 7 cm) C 4.13 in. (10.5 cm) D 32.56 in. (82. 7 cm) E 12.04 in. (30. 6 cm) F 24.08 in. (61. 2 cm) G 19.70 in. (50 .0 cm) H 8.25 in. (21.0 cm) J 16.91 in. (42 .9[...]

Polypropylene Pump Dimensi ons 3A0410D 17 P olypr opylene Pump Dimensions ti16562a ti16563a ti16564a A B C D H J K L E F G Air Inle t (opposite side from muffler) M A 36.80 in. (93. 5 cm) B 41.40 in. (105.2 cm) C 45.34 in. (115.2 cm) D 4.60 in. (11.7 cm) E 14.56 in. (37. 0 cm) F 29.12 in. (74. 0 cm) G 26.69 in. (67. 8 cm) H 8.30 in. (21.1 cm) J 16.[...]

Stainless Steel Pump Dimension s 18 3A0410D Stainless Steel Pump Dimensions ti17455a ti17456a ti17457a A B C D H J K L E F G M Air Inlet (opposite side from muffler) A 23.8 in. (60.5 cm) B 27.88 in. (70. 8 cm) C 30.5 in. (77.5 cm) D 4.5 in. (11.4 cm ) E 12.34 in. (31. 3 cm) F 24.68 in. (62. 7 cm) G 19.38 in. (49 .2 cm) H 8.25 in. (21.0 cm) J 16.91 [...]

Performance Charts 3A0410D 19 Pe r f o r m a n c e C h a r t s T est Conditions: Pump tested in wate r with inlet submerged . A B C D How to Read the Charts 1. Locate fluid f low r ate along bottom of chart. 2. F ollow v er tical line up to intersection with selec ted operating air pressure curve . 3. Follow left to scale to read fluid outlet press[...]

Technica l Data 20 3A0410D T echnical Data Husky 3300 US Metric Maxim um fluid w orking pressure Aluminum or Stainle ss Steel with Aluminum Center Sectio n 125 psi 0.86 MPa, 8.6 bar P olypropylene or Stainless Steel with P olypropylen e Center Section 100 psi 0.7 MP a, 7 bar Air pressure operating range** Aluminum or Stainle ss Steel with Aluminum [...]

Technical Data 3A0410D 21 Inlet/Outlet Si zes Fluid inlet - P olyprop ylene 3 in. ANSI/DIN flange Fluid inlet - Aluminum 3 in.-8 npt or 3 in. -11 bspt with 3 in. ANSI/DIN flange Fluid inlet - Stainless St eel 3 in.-8 npt or 3 in.-1 1 bspt Air Inlet - all p umps 3/4 in. npt( f) We t t e d p a r t s All pumps Materials chosen f or seat, ball, and dia[...]

Technica l Data 22 3A0410D Fluid T emperature Range * Th e maximum tempe rature liste d is based on the A TEX standard f or T4 temperature cla ssification. If y ou are operat ing in a non-e xplosiv e en vironment, FKM f luoroelastomer’ s maximum fluid temper ature in alumin um pumps is 320°F (160°C). NO TICE T emperature limits are ba sed on me[...]

Technical Data 3A0410D 23[...]

All written and visual data con tained in th is document reflects the late st product information availabl e at the time of publica tion. Graco reserves the right to make changes at any time without notice. Original instructions. This manua l contains English. MM 3A0410 Graco Headquarters: Minneapoli s Internationa l Offices: Belgium, China, Japan,[...]