Fujitsu P3PC-E807-01ENC2 инструкция обслуживания

FUJITSU TW AIN 32 Scanner Driver Scanner Utility for Microsof t ® Windows ® V ersion 9.12 User's Guide For Use with Microsof t ® Windows ® 98, Windows ® Me, W indows ® 2000 and Windows ® XP (* For Windows ® 95 and Windows NT ®, 4.0, refer to Version 8.12 User’s Guide.) P3PC-E807-01ENC2[...]

i Intr oduction Thank you for purchasing the "Scanner Utility for Microsoft ® Windows ® V9.12". This software contains a TWAIN-compliant image scanner driver (simply ca lled "driver" in this guide) and utilities. This guide provides a description summary of the driver, as well as a description of the installation method and pr[...]

ii T rademarks Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. I ntel, MMX, Pentium are registered trademarks of Intel Corporation. Adobe, Acrobat are the trademarks or registered trademarks of Adobe Systems Incorporated. ISIS, QuickScan and their respective logos are[...]

iii Organization This manual explains how to install and use this driver, and how to use the TWAIN scanning utility. • Installation This section explains the procedure for insta lling the environments in which this driver may operate. • Using the Driver This section explains how to use the driver. • Using the Gamma Pattern Editor Use of the G[...]

iv Contents 1. Outline .............................................................................................. 1 1.1 Characteristics of this Dr iver ........................................................................... 1 1.2 Operating Envi ronment ................................................................................... 1 1.3[...]

v 4.7.6 Filter ..................................................................................................................... 48 4.7.7 Compression ........................................................................................................ 52 4.8 Setting Advanc e Opti ons ..........................................................[...]

vi 7.2 Device Trouble Relate d to Oper ation .......................................................... 103 7.3 Device Trouble Relate d to Insta llation ........................................................ 104 8. Appendix ...................................................................................... 105 8.1 Relevant Image Scanner Specif[...]

1 1. Outline 1.1 Characteristics of this Driver • This driver complies with TWAIN regulations V1 .9 (the latest version as of April 2003), which are global standards for image scanners . The driver can be used in all TWAIN- compliant applications. • This driver also supports an image scanner that has the "double-sided scan" function. [...]

2 − Microsoft ® Windows ® XP • USB port • RAM: 32 MB or more (a minimum of 64 MB is recommended) • Available hard disk space: 10 MB or more (excluding the area for storing images) • CD-ROM drive (required for installation) • Mouse (recommended) 1.3 Explanatory Notes The descriptions in this manual are prepared based on the following r[...]

3 ◊ Notes on operation procedures If some menus need to be operated in a certain order, the procedural order is described as follows: [A] - [B] - [C] In accordance with this description, operati on [A] is executed first, followed by [B] and [C] in that order. ◊ Figures Figures and screen operations in this guide refer to Microsoft ® Windows ®[...]

4 2. TWAIN 2.1 TWAIN TWAIN is the specification that defines the st andard software prot ocol and application programming interface (API) for data exchange be tween a software application program and an image input device such as the image scanner. [TWAIN development background] In the past, development of a new scanner inev itably required the dev[...]

5 2.2 TWAIN Application TWAIN mainly applies to the following three software components:  Application software  Source manager  Source The components are related to each other as shown below.  A pplicatio n so f tware (p ho to re to uc hing so ft w are , e tc )  S ou r ce ma na ger (TWAI N.DLL/T WA IN_32.DLL, e tc)  So urce (I mag[...]

6 3. Installation 3.1 Preparation 1. Make sure that the operating system (OS) is installed correctly. 2. In case of the SCSI connection, confirm that th e SCSI adapter is connected to your PC and operating correctly. In case of the USB connection, confirm that the USB port is installed in your PC . 3. Confirm that the hard disk that is the installa[...]

7 3.2 Installing the Scanner Driver The Windows ® XP screen sample s are shown below. The screen and operations will differ slightly depending on the OS that is being use d. 1. Turn on the scanner. 2. Turn on your PC and Log o n to Windows ® . When using Windows ® 20 00 or Windows ® XP, log on as an administrator. The scanner may be detected au[...]

8 In case of Windows ® 2000 In case of Windows ® XP 3. Insert the Setup CD-ROM into the CD-ROM drive.  <SETUP DISK START UP SCREEN> is displayed. This Dialog is not displayed automatically when "Auto play" setting of your PC is off. In this case, please run “ Install.exe ” in this CD-ROM directly using “Ex plore” or “[...]

9 4. Click [INSTALL PRODUCTS]. (* Depending on the scanner model, the different screen m ay appear.) 5. Click [TWAIN Driver] (* Depending on the scanner model, the different screen m ay appear.) Depending on the scanner model, the screen which confirms whether “Error Recovery Guide” is installed or not is displayed. In this case, click [OK] but[...]

10 6. Select the language you use in [Choose Se tup Language], then click [OK] button. 7. Click [Next >] button. 8. Read the information of README File, and then click [Next >] button.[...]

11 9. Read the License Agreement carefully, and then click [Yes] button if you agree. If you click [No] button, t he installation is stopped. 10. Confirm Destination Folder, and then click [Next >] button. Usually, it is not necessary to change Destination Folder. 11. Confirm Components you install, a nd then click [Next >] button. Usually, i[...]

12 12. Confirm Program Folder, and then click [Next >] button. Usually, it is not necessary to change the Program Folde r’s name. 13. Click [Next >] button, and copying fi les is started. 14. Select “Yes, I want to restart my comput er now”, and then click [Finish] button. 15. After the restart, the scanner is detected. Depending on the[...]

13 In case of Windows ® 98 There is a request to insert a disc. When this happens, insert the Windows ® 98 CD-ROM in your CD-ROM drive. In case of Windows ® 2000 [Digital Signature not Found] is displayed, click [Yes] button. In case of Windows ® XP 1) [Found New Hardware Wizard] is di splayed, click [Next >] button. 2) If [Hardware Installa[...]

14 Now, the installation of scanner driver is completed.[...]

15 3.3 Uninstall The uninstall process removes the software and return s the hard disk to its pre-installation state. When you want to remove this scanner driver program from your PC, uninstall by the following procedures. 1. Turn on your PC and Log o n to Windows ® . When using Windows ® 20 00 or Windows ® XP, log on as an administrator. 2. Clo[...]

16 4. Using the Driver 4.1 Selecting the Driver To use this driver from the TWAIN applicati on, select "FUJITSU <Product ID>" from the TWAIN data source (driver) selection screen. For general application, the data source selection screen is displayed by selecting the [Select Scanner] or [Acquire ...] menu. Refer to the instruction m[...]

17 4.2.1 Linkage to Image Processing Software Option When the “Enable Software IPC” checkbox is marked after installation of “Image Processing Software Option” (sold separately ), there appears setting items of Image Processing Software Option in a part of the Setting Window for TWAIN Driver. • The ”Image Processing Soft ware Option” [...]

18 4.3 Displaying Driver Information ♦ Image scanner name The model name, option port nam e, and capacity of internal scanner memory (in units of megabytes) of the connected image scanner are displayed. If no image scanner is connected, this field is blank. The type of IPC option board is displayed if an image-processing option board is installed[...]

19 4.4 Setting Information on Image Scanning ♦ Current side When a scanner that allows duplex scanning is used, specifies the page which sets the image scanning information. To scan using the same settings as those for "Front side" and "Back side," clear the checks in the "Individual Setting" checkbox on the " F[...]

20 Resolutions for Image modes (“Color”, “Gra yscale”, and “Black &White”) of the each predefined settings are changed corresponding to the selection of the Image Type. * Click [Default] button to return th e resolutions t o the default value. High resolution produces finer images, meanwhile requires more mem ory that leads to longe[...]

21 [Custom Paper Size Setting] window will appear when you click the [Custom] button. Enter the size of the document to be scanne d. (When e ntering the size, specify the paper size by width x length to the scanning direction.) Some paper sizes may not be accepted by your device. Refer to "Relevant Image Scanner Specification" in Appendix[...]

22 ♦ Scan Type Selects the feeding device. The image scanner uses a document bed called the flat bed as well as an automatic document feeder (ADF) for feeding scanned document. The ADF usually enables the documents to be scanned only once. The fl at bed allows scanning t he same documents repeatedly. Flat bed Scans a document placed on the flat b[...]

23 ADF (Back Side) Scans the documents on the device's automatic document feeder (ADF). Here, only back sides are scanned. Note. To specify duplex scanning, the number of copies designated should be based on the number of pages, not the number of paper sheet s. In other words, one original with a front and back is regarded as two pa ges. ♦ I[...]

24 24bit Color Scans data using 24 bits color. This mode is suitable for scanning color photograph and employs far more memory that Gray scale mode. Only color scanner models support this option. See "Relevant Image Scanner Specification" in the Appendix. 256 Color Scans data using 256 colors. Data size is smaller than "24 bit Color&[...]

25 ♦ Halftone Select the halftone pattern for halftone scanning from the built- in pattern list. Select the desired halftone pattern for disp laying the obtained image. This setting is effective when "Halftone" or "Automatic Se paration" is selected in "Image Mode". Some scanner models do not support thi s function. [...]

26 ♦ Scanning Parameters For fine scan adjustments. Since there is no fixed set of values, set by trial and error. ◊ Brightness: Sets the brightness of the overall image. Specify the brightness with a number in the range of 1 (brigh t) to 255 (dark). To darken the overall image, increase the valu e of the setting. To brighten the overall image,[...]

27 4.5 Specif ying Driver Operation ♦ [Preview] Scans in a preliminary image based on set valu es, and displays the image in the preview window. Before actual scanning, the preview function can be used to display the entire document for specifying the desired scan area. Some models do not support this function. See "Relevant Image Scanner Sp[...]

28 ♦ [Help] Displays online help. When the [F1] key is pr essed, help information regarding the item on which the cursor is placed is displayed. Note Depending on the applicat ion used help information may not be displayable with the [F1] key. This is because the driver ope ration is controlled through the application and the [F1] key may be used[...]

29 4.6 Setting "Scanning Area" Specify the scanning area in the preview window as follows: Setting: 1. Press the left mouse button to specify the or igin (top left corner) of the scanning area. (The cursor appears as a "+".) 2. Drag the mouse to show the outline of th e scanning area. (As the cursor moves, a range frame is shown[...]

30 4.7 Setting Options The "option dialog" is used to set device-specifi c functions and the items that differ depending on whether the scanner used supports them. The option specification is divided into "Rotation", "J ob/Cache", "Generic", "Imprinter (Endorser)" , "Start Up", “Filter?[...]

31 The options are described below: 4.7.1 Rotation Figure Option dialog (Rotation) ♦ Flip Side Rotation Specifies the binding of the document when both sides are scanned using ADF. Book Outputs the scanned image for both sides as is. Select this option to scan documents bound on the left or right side Fanfold Outputs the scanned image of the back[...]

32 ♦ Rotation Degree Outputs the scanned image rotated to the right or left 90 degrees. 0.0 degree Outputs the scanned image as is. 90.0 degree Outputs the scanned image rotated 90 degrees to the right (clockwise). -90.0 degree Outputs the scanned image rotated 90 degr ees to the left (counterclockwise). 180.0 degree Outputs the scanned image rot[...]

33 selected (Double Letter) paper size range is used for scanning, the output will adjust to the page size detected. (However, in case of fi-4860C, fi-4990C, this function is not dependent on the setting of [Paper size] because these scanners always scan documents a s the maximum paper size and detect the paper size from the scanned data.) However,[...]

34 4.7.2 Job/Cache Figure Option dialog (Job/Cache) ♦ Caching Specifies whether to pre-read (cache) when a document is scanned. This option enables faster scanning. If processing of the application being used slows down and scanning stops, this option can be used to prevent degradation of the scanning speed. (The effect, h owever, depends on the [...]

35 Use Both Memory Pre-reads using memory of both Scanner and PC (dis played only if supported by the scanner). ♦ Batch Detection The application can detect documents on a sp ecific type of form (special paper). The application must support this function. None No detection. Scanning is done without change. Include and Continue After the special p[...]

36 Check length The length of the transmitted document is checked by the sensor in the device. A double feed is detected by detecting changes in the length when more than one document is sent. Check thickness and length The thickness and length of the transmitted document are checked. Check overlapping The overlapping of the transmitted document is[...]

37 ♦ Check Over-skew The skew of the transmitted document is supervised during the ADF scanning. When an over-skew is detected, the scanner is stopped and an error message is displayed. * The image data of the skewed document is deleted. * This functions, only when “Double Feed Detection” is enabled. ♦ Blank page skip This option skips blan[...]

38 <If blank page skip does not operate properly> − If a blank page is scanned, increase the value set. − If scanning is skipped up to the require d document, decrease the value set. * When “Black Background” is selected in [Automatic Size and Skew detection], the Blank page skip may not operate properly. When Scanned image has many b[...]

39 4.7.3 Generic Figure Option dialog (Generic) ♦ Unit/Scaling This option selects the unit for the scanning area and preview window. One inch is calculated as 25.4 millimeters. When inches are converted to millimeters, values are rounded off. Note. The TWAIN specifications require that the data width be arranged in units of 32 bits. As a result,[...]

40 4.7.4 Imprinter (Endorser) Figure Option dialog (Imprinter) ♦ Enable Imprinter (Endorser) Specifies enabling or disabling the imprinter function of the device. When the option is selected, the scanned documents are imprinted according to the instructions below. This applies only to the imprinter option. Therefore, the function is supported onl[...]

41 Post-Imprinter (Printing after scanning, and on the back side of documents) Prints on documents using the imprinter installed in rear part of the scanner. In this case, it prints on the back side of documents after scanning. Therefore, the printing is not included in a scanning result. * [Pre-Imprinter] and [Post-Imprinter] cannot be used at the[...]

42 ♦ Initial Value (Counter) Designates the initial count when the Imprinter St ring is set, including a counter value. See the "Relevant Image Scanner Specification" described in the Appendix since the programmable values range depends on the device. ♦ Counter Step (Counter) Designates the counter increment of the set count er values[...]

43 %MM: The month is printed in two digits; for example, 01 for January and 12 for December. %M: The month is printed using one or two di gits; for example, 1 for January and 12 for December. %DD: The day is printed using two digits; for exam ple, 03 for the 3rd day of the month and 26 for the 26th day of t he month. %D: The day is printed using on[...]

44 4.7.5 Start Up Set up the Power Mode, Low-Speed Feed ing and Scanner Operation Panel. In some scanner models, displayed dialog bo x or setup item may be different or even [Startup] dialog box may not be displaye d. In case of model fi-4110CU / fi-4110C(M3091DC) / fi-4210C(M3092DC) In case of model fi-4120C / fi-4220C / fi-4530C Figure Option dia[...]

45 In case of model fi-5750C Figure Option dialog (Start Up) ♦ Power Mode Quick Start Mode This mode keeps the lamp on regardless the scanner’s operating condition, which saves times for lamp to become steady. Low Power Mode To save the power consumption, this mode turns the lam p off, if the scanner is n ot operated for 14 minutes. ♦ Enable [...]

46 ♦ Prefer Scanning Speed This mode makes scanning speed become s faster in color/grayscale scanning. When checking this check box, scanning speed b ecomes faster, but image quality is slightly deteriorated. Check this check box, when giving priority to scanning speed over i mage quality. ♦ Scanner Operation Panel − Enable Scanner Panel This[...]

47 − ADF/FB Automatic change It distinguishes whether to scan from the ADF, or from the Flat Bed (FB), and c hanges automatically. When a document is on the ADF, scanning is started from the ADF. And when no document is on the ADF, scanning is started from the FB. − Enable [Send to] button Specifies whether the preview is started by pressing th[...]

48 4.7.6 Filter Set the filter processing in this dialog. The filter name is displayed in the list box. While checking the checkbox in the left of the filter name, the filter processing is applied to scanned image. When selecting a filter name and clicking [Propert y] button, the setting dialog of the filter is displayed. Figure Option dialog (Filt[...]

49 ♦ Page Edge Filler Eliminates the blemish around the paper edges by covering the area in (Black or White) color. Color Select a color to paint over the image frame . Can select "White" or "Black". Please specify either white or black to match the background color of the document. Filled Area • [Unit] Select a unit from ?[...]

50 ♦ Digital Endorser Character string, such as the alphabet and number, is added on the data of the scanned image. By using this filter, you can attach a name, a date, a time or a serial num ber on the scanned images and manage them. Printing Specify the beginning position of the character string to out put on the scanned image data. X Offset: S[...]

51 Symbols : !”#$%&’()*+,-./:;<=>?@[]^_`{|}~ Other : ( S p a c e ) (*The space is ignored when it is en tered at the head of [String:].) The following definitions can be used. Th ey may also be selected from the menu, which is displayed by clicking on " ". %YYYY : The year i s printed in four di gits using the Western calen[...]

52 4.7.7 Compression Click this tab and mark the check box to en able or disable JPEG compression for data transfer from the image scanner. (This functi on is available only for Color or Grayscale scans.) Figure Option dialog (Compression) ♦ Imprinter String (Endorser) Converts scanned image data into JPEG format for transfer. Because of smaller [...]

53 4.8 Setting Advance Options The "advance dialog" is used to set items relate d to image processing. T he settings apply to device-specific functions and items that differ according to whether the scanner used supports them. The advance option specification is divided in to "Color Variance", "Image Processing", and &[...]

54 The options are described below: 4.8.1 Gray Figure Advance dialog (Gray) ♦ Gamma Pattern This option corrects distortions from nonlinear image representation. Scanner sensors are generally designed to ge nerate output linear to the density of the light reflected from the document. However, most output terminals do not pr oduce output that has [...]

55 Select the gamma pattern download file to be us ed fr om the list of file names. Then, press the [OK] button. Correction will then be executed using the selected gamma patt ern. If the gamma pattern download file has not been re gistered in the list of file names, use the [Add] button to register the file. See "Download Pattern File" f[...]

56 ♦ Reverse This option specifies whether to reverse th e black and white of a scanned image. If this option is selected, black and white are reversed by reversing the black and white pixels. If this option is not selected, the bl ack and white values of the reproduced image correspond to the original image. Some applications do not p ermit norm[...]

57 4.8.2 Image Filter Figure Advance dialog (Image Filter) ♦ Edge Processing This option specifies the sharpness of a scanned image. Select "None", "Edge Extract", or "Smoothing (Background Removal)". None Edge processing is not performed. Edge Extract This option outputs an image with the edge extracted. If this opt[...]

58 Emphasis This option outputs an image with the edge emphasized. "Emphasis High", "Emphasis Mid", or "Emphasis Low" can be selected. If "Emphasis High" is selected, the image becomes sharper. If "Emphasis Low" is selected, the image appears less distinct. ♦ Mirror This option specifies whether t[...]

59 4.8.3 DTC This option is valid only when "DTC Variance" is set. Figure Advance dialog (DTC Mode) ♦ Scan mode This option selects one of the following two scan m odes: [for OCR]: This mode is for text recognition applications where irregularity in the image is undesirable. [for Image] : This mode is for image scanning app lications th[...]

60 ♦ Threshold Curve This option specifies the relationship between the threshold value and the maximum density. The specification method depends on the [Scan mode] setting. In [for OCR] mode, use the scroll bar to set th e inclination and density level between 0 and 5. Click the arrow of the scroll bar or drag the scroll marker to the desired se[...]

61 ♦ OCR Smoothing/ Background Removal The OCR smoothing is the function to make sm ooth the notched part of line-drawing, and the Background Removal is the functio n to remove the uneven background. These functions are enabled when it is selected. For further information, please refer to the Use r’s guide attached to the IPC board since the fu[...]

62 4.8.4 When Color (/Grayscale) is specified For color scanners, when “Color” is selected in the [Image Mode], the [Advance] dialog changes as follows. And in case of some colo r scanners, when selecting “Grayscale” the [Advance] dialog change as same as selecting “Color”. There are two image samples which are “Sampl e (before proces[...]

63 ♦ Contrast/Brightness (Color / Grayscale) Contrast : Sets the contrast of light and sh adow in a scanned image. Specify the contrast with a number in the range of 1 (low [soft]) to 255 (high [sharp]). If this value is increased, the dark part of the image is shown darker and the light part is shown lighter. Some scanner models do not support t[...]

64 When "Download Pattern" is select ed, the above dialog box opens. Select the gamma pattern download file to be us ed fr om the list of file names. Then, press the [OK] button. Correction will then be executed using the selected gamma patt ern. If the gamma pattern download file has not been re gistered in the list of file names, use th[...]

65 <Image Mode : C olor selected> <Image Mode : G rayscale se lected> Figure Advance dialog ([Quality] / [Gray] tab) ♦ Image Emphasis (Color only) This option specifies the sharpness of a scanned image. Select "None", "De-Screen" or "Emphasis". None Edge processing is not performed. Emphasis This option o[...]

66 ♦ White Level Follower (Color) Select this option to scan a document whos e background color is not white, such as a newspaper. Select "Auto", "Enable", or "Disable". When "Enable" is selected, the document is scanned using background fo llow-up (for line drawings). When "Disable" is selected, [...]

67 4.9 Setting the Setting Manager Options These options are used to manage the setting f iles, and switch the basic scan dialog display. Press the [Config...] button of the main dialog to open the [Configuration] dialog box shown below. Figure Configration dialog box ♦ Setting Files The setting information of the scan conditions can be saved in [...]

68 ♦ FTS File Information The information of the setting file selected in [Setting Files] is displayed. ♦ [Show this dialog next open] checkbox If this checkbox is checked, [Basic Scan Dialog] will be activated the next time the driver is activated. ♦ [OK] button Makes the new setting valid, closes this dialog box, and returns to the m ain di[...]

69 ♦ [Delete] button Deletes unnecessary setting files. Select the setting file to be deleted and th en press the [Delete] button. A confirmation dialog will be displayed. Press the [OK] butto n to delete the setting file. To cancel, press the [Cancel] button. ♦ [Help] button Displays online help. ♦ [Initialize] button All of scan settings ar[...]

70 4.10 Basic Scan Dialog The basic scan dialog contains only the minim um functions required for scanning. The detailed setting functions of the main dialog have been om itted. Scanning can be easily performed by selecting a registered setting file. The basic scan dialog is also useful for avoidi ng incorrect operations when standard work is perfo[...]

71 ♦ FTS File Information The contents of the selected file are displayed. ♦ [Scan] button Executes scanning based on the contents of the setting file. ♦ [OK] button Terminates without performing the scan operation. ♦ [Adjust] button Switches from the basic scan dialog to the main dialog. ♦ [Help] button Displays online help. ♦ [Show th[...]

72 4.11 Download Pattern File The "download pattern file" of this driver is a file that defines the patterns to be used by the scanner to execute various image processing. This file is available in the following two versions. Each version can be selected using the [D ownload Selection Dialog] that opens when [Download] is selected. The fi[...]

73 Example: In case of 8x8 matrix 8, 8, 128, 128, 128, 128 , 128, 128, 128, 128, 255, 128, 128, 128 , 128, 128, 128, 128, 255, 255, 128, 128 , 128, 128, 128, 128, 255, 255, 255, 128 , 128, 128, 128, 128, 255, 255, 255, 255 , 128, 128, 128, 128, 255, 255, 255, 255 , 255, 128, 128, 128, 255, 255, 255, 255 , 255, 255, 128, 128, 255, 255, 255, 255 , 25[...]

74 ♦ Gamma download pattern file Any user defined gamma correction proce ssing can be perform ed by downloading the pattern from the gamma download file to th e scanner. The defined pattern becomes effective when [Download Pattern] is selected for [Gamma Pattern]. Some models do not support this file. See "Relevant Image Scanner Specificatio[...]

75 Example 256, 256, 255, 254, 253, 252 , 251, 250, 249, 248, 247, 2 46, 245, 244, 243, 242, 241, 240, 239 , 238, 237, 236, 235, 234, 2 33, 232, 231, 230, 229, 228, 227, 226 , 225, 224, 223, 222, 221, 2 20, 219, 218, 217, 216, 215, 214, 213 , 212, 211, 210, 209, 208, 2 07, 206, 205, 204, 203, 202, 201, 200 , 199, 198, 197, 196, 195, 1 94, 193, 192,[...]

76 5. Using the Gamma Pattern Editor 5.1 Start-up Click on [Start] and select [Download Patte rn Editor] from "Scanner Utility for Microsoft Windows" under [Programs]. The following menu is displayed: Figure Gamma Pattern Editor Tool start-up menu[...]

77 5.2 [File] menu ♦ [Load...] This menu is used to read the Gamma Download file and display the graph and gradations. The name of the open file is displayed above the graph area. ♦ [Save] The gamma pattern currently being edited is sa ved in the file whose nam e is displayed above the graph area. If no filename is displa yed, the pattern is na[...]

78 5.4 Gamma Pattern Editing ♦ Graph Area The graph area is a 256-dot x 256-dot white square area bordered by black lines, where the relationship between the input values of 0 to 2 55 (x axis) and output values of 0 to 255 (y axis) is indicated in blue lines. Each graph dot represents one division (u nit). ♦ Gradation The input is displayed in [...]

79 6. Definition of Scanner and Camera Properties 6.1 Displaying Scanner and Camera Properties Double-click the [Scanner a nd Camera] icon on the [Control Panel] to display the corresponding properties dialog box shown below. If the scanner driver has been properly installed, the icon of your scanner is displayed. Select the model name. And double-[...]

80 6.3 Events Tab On the Events tab, an application can be sp ecified to be started automatically by “Scanner events” such as “pushing buttons on the sca nner” or “placing documents to the scanner”. (The Events tab is not displayed if the device does not support this function.) ♦ Scanner events Select a “scanner event” from the li[...]

81 In Windows XP, the following “Events” screen may be displayed. (*This screen has the same function as the above screen.) ♦ Select an event Select a “scanner event” from the list box to st art an application. Please select the item to set up from the following events. " Feeder loaded with pape r " : When placing paper to the A[...]

82 6.4 Diagnostic Tab To perform more detailed diagnostic tests than those provided in the general tab folder, click the [Diagnose] button. In Windows ® 2000 or Windows ® XP, only a user who has administrator authority can run these tests.[...]

83 6.5 Device Information Tab A list of the functions compatible with the sel ected scanner driver is displayed. The items displayed depend on the selected model of scanner. Only hardware functions are displayed. The functions realized by software are not displaye d in this tab fol der. Therefore, the displayed content may not match the content spe[...]

84 6.6 Device Set up Tab Information related to the operation and maintenance of the scanner driver can be displayed and set up. For some scanner models, this tab m ay not be displayed, or some items cannot be set up (grayed out). Changing the setup activates the A pply button. The c hanged setup is reflected on the device only if the Apply button [...]

85 When using a scanner, the follo wing message may be displayed. If this message appears, replace consumab les following the instructions below. < If replacing consumables immediately > 1. Check [This message not display again.] 2. In cases where consumables are replaced af ter completing all documents being scanned, click [Ignore]. In cases[...]

86  [Power saving mode] button This specifies the power saving mode. If this button is clicked, the following dialog box is displayed. Quick Start Mode This mode keeps the lamp on regardless the scanner’s operating condition, which saves times for lamp to become steady. Low Power Mode To save the power consumption, this mode turns the lam p of[...]

87 At shipment, the offset has been adjusted to an optimum value within a certain range. Therefore, adjustment is not generally required. *The maximum size of changes depends on the device . Enable eliminating a dark area on the top of the image. Enable eliminating a dark area on the left side of the image. These modes can be selected to eliminate [...]

88 6.7 About Tab The version of this driver and a link to the Fujitsu home page are displayed. 6.8 Color Management Tab Color profiles assigned to the device can be added or deleted from this folder. "sRGB Color Space Profile.icm" is the defa ult driver assigned to this driver.[...]

89 6.9 Scanning by using “Scanner and Camera Wizard” In case of Windows XP, you can scan by using “Scanner and Camera Wizard”. (* It functions when scanning with su pported scanner.) Follow below procedure to scan: 1. On the [Start] menu, select [Control Panel] – [Scanners and Cameras]. 2. Double-click on your scanner’s icon. 3. Click [[...]

90 5. Specify a file name, a format and a place to save scanned images. And click [Next] button.  Scanning starts. (The following win dow is displayed during scanning.) 6. Select an item of “What do you want to do?” to keep working with your picture. And click [Next] button. * Refer to Windows Help f or detail. 7. Select “Nothing, I’m fi[...]

91 8. Click [Finish] button to finish this wizard.[...]

92 7. Troubleshooting 7.1 Error Messages 7.1.1 Messages from the TWAIN Driver • The input value is outside the range. Cause: A value exceeding the range allowed for an input item was input. User response: Input a value inside the allo wed range. Refer to the input item or the image scanner specification for the range. • The input value is not a[...]

93 • The value for custom paper is higher than the maximum scan size. Width nee ds to equal 279 mm or less and length needs to equal 420 mm or less. • The value for custom paper is higher than the maximum scan size. Width nee ds to equal 11 inch or less and length needs to equal 16.53 inch or less. • The value for custom paper is higher than [...]

94 • Cannot specify Individual Setting with Gray Scale. • Cannot specify Long Page Scan with Gray Scale. Cause: Gray Scale and Individual Setting are specified at the same time. Gray Scale and Long Page Scanning are specified at the same time. User response: Uncheck Individual Setting when specifying Gray Scale. At Long Page scanning, select Bl[...]

95 • Specified string is too long. Cause: The specified string is too long. Up to 128 en-size characters and up to 64 em-size characters can be specified. User response: User response: Reduce the number of characters in the string so that they do not exceed 128 en-size characters. Then, try scanning again. • Cannot specify next words for filena[...]

96 There may be a fault in the image scanner itself. User response: Turn off the power of all devices, then turn on the power of the computer before turning on the scanner and retry scanning. If the error still occurs, contact the retail store where the image scanner was purchased, or the nearest service center. • Scanner is turned OFF. Data sour[...]

97 User response: Reduce the scanning area or resolution. Otherwise, install the memory option. Refer to the User 's Guide of the image scanner for more information. In color scanning, try to increase the data compression ratio. • The current parameter(s) is (are) not allowed. Please use (an)other parameter(s) and try scanning again. Cause: [...]

98 User response: Check that the ink cartridge of the imprinter is mounted properly a nd scan again. • Imprinting position is set out of paper. Pleas e check the imprinting position and try again. Cause: Printing is not available because the printing part is outside the paper width. User response: Adjust the imprinter so that the printing part is[...]

99 • An error occurred in the temporary file. Cause: Accessing the internal temporary file of the scanned image is causing the error. The disk space may be in sufficient, the temporary file may be damaged, or other program s may be affecting disk access. User response: Increase the free space of th e disk. Check the hard disk (chkdsk and scandsk)[...]

100 • A parameter error has occurred (internally) • The calling procedure is invalid (internally). • The area is specified incorrectly (internally). • The calculation result exceeded the value that can be expressed (internally). • User definition is not registered (internally). • Illegal value is received during communication with scann[...]

101 • An undefined error occurred • Processing cannot be continued b ecause of insufficient memory. • The data source cannot be found. • The driver is connected to a maximum number of applications supported. • An operation error occurred. • An invalid function is specified. • Unpermitted combination of MSG DG DAT. • An invalid value[...]

102 7.1.2 Error messages relating to gamma correction pattern editing • Enter a positive decimal value. Cause: A value other than a number has been entered as the gamma correction value. Alternatively, 0 or a negati ve value has been entered. User response: Reenter a valid value. • The file could not be created. Cause: The file for saving could[...]

103 7.2 Device Trouble Related to Operation • The [Scan] button is pressed, but scanning is not performed. Cause: Has the scanner power been turned on? Has the SCSI cable been connected correctly? Has the correct device type been selected using [Select TWAIN Input Device]? • The scanner appears to be operati ng, but no image is displayed. Cause[...]

104 7.3 Device Trouble Related to Installation • Can not install the driver . (The installation is stopped on the way.) Cause: Is the older version FUJITSU TWAIN driver .installed in your PC? User response: Please install the driver after uninstalling the old versions. • Though the PC is activated after connecting th e scanner device, the scann[...]

105 8. Appendix 8.1 Relevant Image Scanner Speci fication Product: fi-4010CU Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed, Autom atic Document Feed (ADF), Single-sided reading Light source: Fluorescent tube (White) Basic resolution: 600 dpi Output resolution 1 : 50 dpi to 600 dpi (at steps of 1dpi) Gr[...]

106 Interface: USB 1.1 Preview: Enabled (at Flat bed scanning only) Flip Side Rotation: Disabled Rotation: Enabled Automatic Size and Skew detection: Disabled Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Me mory on Scanner] ) function: Disabled Batch Detection: Disabled Double feed d[...]

107 Product: M3091DC (fi-4110C) Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Docume nt Fe ed (ADF), Simultaneous double-sided scanning Light source: Fluorescent tube (White) Basic resolution: 300 dpi Output resolution 1 : 50 dpi to 600 dpi (at steps of 1dpi) Grayscale levels (internal): 8 bit 256 levels Grayscale o[...]

108 Preview: Enabled (at ADF scanning) Flip Side Rotation: Enabled Rotation: Enabled Automatic Size and Skew detection: Disabled Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Me mory on Scanner] ) function: Disabled Batch Detection: Disabled Double feed detection: Disabled Pre-Pick: D[...]

109 Product: fi-4110CU Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Docume nt Fe ed (ADF), Simultaneous double-sided scanning Light source: Fluorescent tube (White) Basic resolution: 600 dpi Output resolution 1 : 50 dpi to 600 dpi (at steps of 1dpi) Grayscale levels (internal): 8 bit 256 levels Grayscale output: En[...]

110 Preview: Enabled (ADF scanning) Flip Side Rotation: Enabled Rotation: Enabled Automatic Size and Skew detection: Disabled Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Me mory on Scanner] ) function: Disabled Batch Detection: Disabled Double feed detection: Disabled Pre-Pick: Disa[...]

111 Product: fi-4120C Type: Desktop Image sensor: Color CCD (Reduced optical system) Operating method: Automatic Docume nt Fe ed (ADF), Simultaneous double-sided scanning 1 , Long page scanning Black&White : Max 216m m x 711mm Grayscale, Color 2 : Max 216mm x 610mm Light source: Fluorescent tube (White) Basic resolution: 600 dpi Output resoluti[...]

112 Gamma pattern: Internal types are not available. (Cannot be downloaded) At custom specification, entering a value enables to set a pattern. Image processing function: Simplified D ynamic Threshold (SDTC), De-Screen, Edge emphasis, 256 Color, 8 Color Interface: SCSI-II, USB1.1 Preview: Enabled (at ADF scanning) Flip Side Rotation: Enabled Rotati[...]

113 Product: M3092DC (fi-4210C) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed (FB), Autom atic Document Feed (ADF), Simultaneous double-sided scanning Light source: Fluorescent tube (White) Basic resolution: 600dpi (FB), 300 dpi (ADF) Output resolution 1 : 50 dpi to 600 dpi (at steps of 1dpi) Grayscale[...]

114 Preview: Enabled (at Flat bed scanning, ADF scanning) Flip Side Rotation: Enabled Rotation: Enabled Automatic Size and Skew detection: Disabled Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Me mory on Scanner] ) function: Disabled Batch Detection: Disabled Double feed detection: D[...]

115 Product: fi-4220C Type: Desktop Image sensor: Color CCD (Reduced optical system) Operating method: Document fixed Flat bed (FB), Autom atic Document Feed (ADF), Simultaneous double-sided scanning 1 , Long page scanning Black&White : Max 216mm x 711mm Grayscale, Color 2 : Max 216mm x 610mm Light source: Fluorescent tube (White) Basic resolut[...]

116 High light / Shadow : 255 steps (at Color / Grayscale scanning) Gamma pattern: Internal types are not available. (Cannot be downloaded) At custom specification, entering a value enables to set a pattern. Image processing function: Simplified D ynamic Threshold (SDTC), De-Screen, Edge emphasis, 256 Color, 8 Color Interface: SCSI-II, USB1.1 Previ[...]

117 Product: M3093GX 1 (device name: fi-4320S, VSP210) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feeder (ADF) Light source: Xe discharge tube (Green) Basic resolution: 400 dpi Output resolution: Standard: 400, 300, 240, 2 00 dpi With image processing optio[...]

118 Use Both Memory ( [Ram Cache]+[Use Me mory on Scanner] ) function: Disabled Batch Detection: Enabled Double feed detection: Disabled Pre-Pick: Disabled Check Over-skew: Disabled Blank page skip: Enabled (only when ram cache is used) JPEG Transfer (Hardware Compression) : Disabled Filter: Page Edge Filler Drop out color: Disabled sRGB output : D[...]

119 Product: M3093DG (fi-4320, VSP220) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed) Automatic Document Feeder (ADF) Simultaneous double-sided scanning Light source: Xe discharge tube (Green) Basic resolution: 400 dpi Output resolution: Standard: 600 1 , 400, 300, 240, 200, 150, [...]

120 Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Me mory on Scanner] ) function: Disabled Batch Detection: Enabled Double feed detection: Disabled Pre-Pick: Disabled Check Over-skew: Disabled Blank page skip: Enabled (only when ram cache is used) JPEG Transfer (Hardware Compression) [...]

121 Product: fi-4340C Type: Desktop Image sensor: Color CCD, Reduced optical system Operating method: Document fixed Flat bed, Autom atic Document Feed(ADF), Simultaneous double-sided scanning Long page scanning (216mm x 1541mm, Black&White only) Light source: Fluorescent tube (White) Basic resolution: 400 dpi Output resolution: Standard: 50 dp[...]

122 Image processing function: Simplified Dyna mic Threshold (SDTC), Edge emphasis, Edge extraction, De-Screen, SEE(Selectable Edge Enhancement), Reverse image, 256 Color, 8 Color With image processing option Dynamic Threshold (DTC), Smoothing, Filtering, Nois e removal, Automatic Separation Imprinter (Endorser): With imprint er option (Reverse sid[...]

123 Product: fi-4530C Type: Desktop Image sensor: Color CCD Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (Resolution free) Black&White : Maximum 297mm x 864mm Grayscale, Color : Maximum 297mm x 864mm Light source: Fluorescent tube (White) Basic resolution: 600 dpi Output resolution: 50 [...]

124 Image processing function: Simplified Dynamic Threshold (SDTC) Edge emphasis, Edge extraction, De-screen, 256 color, 8 color, Reverse image Imprinter (Endorser): With Imprint er option (Reverse side, minimum left ma rgin printing position of 5mm) 1 Maximum number of characters to be printed: 40 characters Counter display range: 0 to 99999 (at 5[...]

125 Product: M3096GX 1 (fi-4620S, VSP310) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feed (ADF) Light source: Xe discharge tube (Green) Basic resolution: 400 dpi Output resolution: Standard: 400, 300, 240, 2 00 dpi With image pr ocessing option: 50 dpi to 8[...]

126 Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Me mory on Scanner] ) function: Disabled Batch Detection: Enabled Double feed detection: Disabled Pre-Pick: Disabled Check Over-skew: Disabled Blank page skip: Enabled (only when ram cache is used) JPEG Transfer (Hardware Compression) : Disabled Filter: [...]

127 Product: fi-4640S Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed, Autom atic Document Feed(ADF) Long page scanning (297mm x 1387mm, Black&White only) Light source: Xe discharge tube(Green) Basic resolution: 400 dpi Output resolution: Standard: 50 dpi to 800 dpi (at steps of 1dpi) Grayscale level[...]

128 Imprinter (Endorser): With imprint er option (Reverse side, minimum left ma rgin printing position of 42 mm) 1 Maximum number of characters to be printed: 40 characters Counter display range: 0 to 99999 (at 5 d igits display) 0 to 167772 15 (at 8 digits display) Direction (Printing): Top to Bottom, Bottom to Top Interface: SCSI-II Preview: Enab[...]

129 Product: M4097D (fi-4750, VSP330) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed, Autom atic Document Feed(ADF), Simultaneous double-sided scanning Long page scanning (297mm x 1387mm, Black&White only) Light source: Xe discharge tube(Green) Basic resolution: 400 dpi Output resolution: Standard: [...]

130 Imprinter (Endorser): With imprint er option (Reverse side, minimum left ma rgin printing position of 42 mm) 1 Maximum number of characters to be printed: 40 characters Counter display range: 0 to 99999 (at 5 d igits display) 0 to 167772 15 (at 8 digits display) Direction (Printing): Top to Bottom, Bottom to Top Interface: SCSI-II Preview: Enab[...]

131 Product: fi-4750L Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed, Autom atic Document Feed(ADF), Simultaneous double-sided scanning Long page scanning (297mm x 1387mm, Black&White only) Light source: Xe discharge tube(Green) Basic resolution: 400 dpi Output resolution: Standard: 50 dpi to 800 dp[...]

132 Imprinter (Endorser): With imprint er option (Reverse side, minimum left ma rgin printing position of 42 mm) 1 Maximum number of characters to be printed: 40 characters Counter display range: 0 to 99999 (at 5 d igits display) 0 to 167772 15 (at 8 digits display) Direction(Printing): Top to Bottom, Bottom to Top Interface: SCSI-II Preview: Enabl[...]

133 Product: fi-4750C Type: Desktop Image sensor: LED(RGB) + Reduced optical system Operating method: Document fixed Flat bed, Autom atic Document Feed(ADF), Simultaneous double-sided scanning Long page scanning (297mm x 1387mm, Black&White only) Light source: LED (R, G, B) Basic resolution: Horizontal scanning: 400 dpi Vertical scanning: 800,7[...]

134 Image processing function: Simplified Dyna mic Threshold (SDTC), Edge emphasis, Edge extraction, De-Screen, SEE(Selectable Edge Enhancement), Reverse image, 256 Color, 8 Color With image processing option Dynamic Threshold (DTC), Smoothing, Filtering, Nois e removal, Automatic Separation Imprinter (Endorser): With imprint er option (Reverse sid[...]

135 Product: M3097G 1 Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feed (ADF) Light source: Fluorescent tube (Green) Basic resolution: 400 dpi Output resolution: Standard: 400, 300, 240, 2 00 dpi With image processing option: 50 dpi to 1,60 0 dpi (at steps of[...]

136 Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Me mory on Scanner] ) function: Disabled Batch Detection: Enabled Double feed detection: Disabled Pre-Pick: Disabled Check Over-skew: Disabled Blank page skip: Enabled (only when ram cache is used) JPEG Transfer (Hardware Compression) [...]

137 Product: M3097DG Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feed (ADF) Simultaneous double-sided scanning Light source: Xe discharge tube (Green) Basic resolution: 400 dpi Output resolution: Standard: 600, 400, 300, 2 40, 200, 150, 100 dpi With image pr[...]

138 Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Me mory on Scanner] ) function: Disabled Batch Detection: Enabled Double feed detection: Disabled Pre-Pick: Disabled Check Over-skew: Disabled Blank page skip: Enabled (only when ram cache is used) JPEG Transfer (Hardware Compression) [...]

139 Product: fi-4860C Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (297mm x 878mm, Black&White only) Light source: Fluorescent tube (White) Basic resolution: 400 dpi Output resolution: Monochrome: 400, 300, 24 0, 200, 150, 100dpi Color:[...]

140 Image processing function: Dynamic Threshold (SDTC, DTC), Edge emphasis, Edge extraction, Automatic separation, Mirror image(Black&White only), Reverse image, 256 Color, 8 Color Imprinter (Endorser): With Imprint er option (Pre-Imprinter / Post-Imprinter) (Reverse side, minimum left ma rgin printing position of 5 mm) 1 Maximum number of cha[...]

141 Product: M4099D (fi-4990) Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (297mm x 878mm, Black&White only) Light source: Fluorescent tube (White) Basic resolution: 400 dpi Output resolution: Standard: 400, 300, 240, 2 00, dpi With ima[...]

142 Imprinter (Endorser): With endorser option (Reverse side, minimum left ma rgin printing position of 20 mm) 1 Maximum number of characters to be printed: 30 characters Counter display range: 0 to 99999 (at 5 d igits display) 0 to 167772 15 (at 8 digits display) (There are partly limitations by the revision of the scanner device.) Direction(Print[...]

143 Product: fi-4990C Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (297mm x 878mm, Black&White only) Light source: Fluorescent tube (White) Basic resolution: 400 dpi Output resolution: Monochrome: 400, 300, 24 0, 200, 150, 100dpi Color:[...]

144 Imprinter (Endorser): With endorser option (Reverse side, minimum left ma rgin printing position of 20 mm) 1 Maximum number of characters to be printed: 30 characters Counter display range: 0 to 99999 (at 5 d igits display) 0 to 167772 15 (at 8 digits display) (There are partly limitations by the revision of the scanner device.) Direction(Print[...]

145 Product: M3099G, M3099GX Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Docume nt Fe ed (ADF), Simultaneous double-sided scanning Light source: Fluorescent tube (Green) Basic resolution: Horizontal scanning: 200 dpi Output resolution: Standard: 400, 300, 240, 2 00, dpi With image pr ocessing option: 50 dpi to 400[...]

146 image, Reverse image, Dynamic Threshold (DTC), Smoothing, Filtering, Noise removal Imprinter (Endorser): With imprint er (endorser) option (Reverse side, minimum left ma rgin printing position of 20 mm) 1 Maximum number of characters to be printed: 20 characters Counter display range: 0 to 65535 (5 dig its display) Direction (Printing): Top to [...]

147 Product: M3099GH Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Docume nt Fe ed (ADF), Simultaneous double-sided scanning Light source: Fluorescent tube (Green) Basic resolution: 200 dpi Output resolution: Standard: 400, 300, 240, 2 00, dpi with image processing option: 50 dpi to 400 dpi (at steps of 1 dpi) Grays[...]

148 Imprinter (Endorser): With imprint er (endorser) option (Reverse side, minimum left ma rgin printing position of 20 mm) 1 Maximum number of characters to be printed: 20 characters Counter display range: 0 to 65535 (5 dig its display) Direction (Printing): Top to Bottom Interface: SCSI-II Preview: Disabled Flip Side Rotation: Enabled Rotation: E[...]

149 Product: fi-5750C Type: Desktop Image sensor: Color CCD + Reduced optical system Operating method: Document fixed Flat bed(FB), Autom atic Document Feed(ADF), Simultaneous double-sided scanning Long page scanning (297mm x 863.6mm Light source: Fluorescent tube (White) Basic resolution: 600 dpi Output resolution: Standard: 50 dpi to 600 dpi (at [...]

150 Image processing function: Simplified Dyna mic Threshold (SDTC), Edge emphasis, Edge extraction, De-Screen, SEE(Selectable Edge Enhancement), Reverse image(at Black & White, Grayscale), 256 Color, 8 Color Interface: SCSI-II, USB 2.0 Preview: Enabled (at Flat bed scanning only) Flip Side Rotation: Enabled Rotation: Enabled Automatic Size and[...]

151 8.2 Maintenance Service This section explains briefly how you can help us to provide yo u with high-quality maintenance service. Since it is practically impossible for the Fujitsu se rvice staff to be aware of every detail of your daily scanning operation, please understand that our staff ma y so metimes be unable to answer your question immedi[...]

FUJITSU TWAIN32 Scanner Driver / Utility “Scanner Utility for Microsoft ® Windows ® ” Users Guide 32 bit version First Edition December 2003 All Rights Reserved, Copyright © PFU LIMITED 2003 The conten ts of this document ma y change for improvements without prior notice. PFU LIMITED takes no responsibilit ies for infringements of third part[...]