Frigidaire 309000834 инструкция обслуживания

OWNER’S GUIDE READ AND SAVE THESE INSTRUCTIONS AIR CONDITIONER ELECTRONIC CONTROL P/N 309000834 (10/99)[...]

2 ROOM AIR CONDITIONER WARRANTY Y our product is protected by this warranty Y our applian ce is warrante d by White Consol idated Indust ries, In c. WCI has authorized Frigidaire Consumer Services and their authorize d servicers to per f o rm s e r vice u nder t his war r a n t y . W CI au t h orizes no o ne el s e to change or ad d to any of the s e oblig ations u nder t his war r a n t y . Any ob ligations for service and par t s under this warrant y must be per f o r m ed b y F r ig idair e Con s u mer S ervices or an authorize d Frigid aire ser v i c e r . W A R R A N T Y FRIGIDAIRE , THROUGH ITS AUTHORIZED THE CONSUMER WILL BE P E R I O D S E R VICERS , WILL: RESPONS IBLE FOR: FULL ONE-[...]

3 Product Registration Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers. On most models, the serial plate is located on the outside of the cabinet. On some models, r emove the filter and look at the bottom edge of the air conditioner behind the front grille for the model and serial numbers. Reading these numbers may be easier by using a flashlight or by removing the cabinet front as instructed under “Car e and Cleaning.” Model No. ____________________________________________________________ Serial No. _____________________________________________________________ Register Your Product The self-addressed PRODUCT REGISTRATION CARD should b[...]

4 Read all instructions before using this air conditioner . For Your Safety Do not s to re or use gaso l i ne or o ther f lammable vapo rs a nd liqui ds i n t he vi c i nity o f this or any oth er appli ance. Read pro duct l abels for flamma bility and o t her war n i n g s . Prevent Accidents T o reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions, including the following: • Be sure the electrical service is adequate for the model you have chosen. This information can be found on the serial plate, which is located either on the side of the cabinet or behind the grille. • If the air conditioner is to be installed in a [...]

5 Front Installation Some models are shipped in a removable sleeve, please follow the supplied Installation Instruction before installing the Decorative front and accessories. Installing the Vent Control (on some models) The vent control handle is included in the decorative front kit. The handle must be installed before the decorative front is attached. 1. Insert the handle with the “etchings (Vent/Air)” facing to the left. 2. Slip the black door extension into the split at the end of the handle. 3. For ease of assembly, push the handle in while pressing the door extension against the foam until the two pieces lock together . 4. Move handle in and out to be sure vent is operating properl[...]

6 Using Air Conditioner T o reduce the risk of fire, electric shock, or injury to persons, read the IMPOR T ANT SAFETY INSTRUCTIONS before operating this appliance. T o begin operating the air conditioner, follow these steps: 1. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension cord or an adapter plug.) 2. Set the exhaust vent to the CLOSED position. 3. Adjust the louvers for comfortable air flow . Review the “Air Conditioner Features” section for other settings. A ir C on d iti on e r Fe at ur e s ELECTRONIC CONTROL OPERATING INSTRUCTIONS Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its func[...]

DO THIS: PRESS AUTO YOU WILL SEE: S T EP 4 — TO ALLO W C ONT ROL T O CHOO SE F AN SPEED: Note: The fan speed will begin in HI, then adjust to MED and LO as the room temperature conditions dictate. For example, if the room doesn’t get too warm it will stay at LO. If the room temperature rises quickly, such as a door being opened, it will automatically go to HI speed. The fan speeds will readjust back to LO as the room returns to the original set temperature. 7 Note: Tap or hold either up( ^ ) or down( v ) button until the desired temperature is seen on the screen. This temperature will be automatically maintained anywhere between 60F (15C) and 90F (32C). If you want the display to read th[...]

8 A ir C o nd iti on e r F ea tu r e s (continued) YOU WILL SEE: STEP 5 — TO OPERATE ON FAN ONL Y : Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Note: The “AUTO” setting will not operate in FAN ONL Y .) During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. DO THIS: PRESS ON (if not running) PRESS F AN ONL Y CHOOSE ONE DO THIS: PRESS ENERGY SAVER YOU WILL SEE: STEP 6 — TO USE THE ENERGY SAVER FE[...]

9 A ir Co nd it io ne r F ea tu r e s (continued) DO THIS: PRESS YOU WILL SEE TIME CHOSEN: STEP 8 — TO INCREASE DELAYED START TIME: Note: Tap or hold the UP arrow( ^ ) to increase delayed start time by .5 hours (up to 10 hours), then in 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.). The unit will then come on in Cool and HI fan mode. The temperature maintained will be the same as you previously set. If you want to change it, Press ‘Cool” then Up or Down ar r ows until the desired temperature is indicated on the display. Press Timer pad again to show remaining time. Switching unit on at any time will nullify this setting. [...]

10 A ir Co nd it io ne r F ea tu r e s (continued) ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. • Remote control works exactly like the control panel, follow the same instructions. • The “Cool “ circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time. • The control will maintain the set temperature within 2-3 degrees Fahrenheit, between 60F and 90F degrees. Fresh Air Vent Control The Fresh Air Vent al[...]

11 Care and Cleaning Clean your air conditioner occasionally to keep it looking new . Be sure to unplug the unit before cleaning to prevent shock or fire hazards. Air Filter Cleaning The air filter should be checked at least once a month to see if cleaning is necessar y . T rapped particles in the filter can build up and cause an accumulation of frost on the cooling coils. • Push the vent handle to the OFF position. • T ilt the Horizontal Louvers in the UP position, before pulling the filter out. • Grasp the filter by the center and pull up and out. • On some models, first tilt the panel out by grasping the panel from both sides just below the air directional louvers and gently pull [...]

12 A void Service Checklist OCCURRENCE SOLUTION Before calling for service, review this list. It may save you time and expense. This list includes common occur r ences that are not the result of defective workman- ship or materials in this appliance. Air conditioner will not operate. W all plug disconnected. Push plug firmly into wall outlet. Batteries in remote may need to be replaced. House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker . Unit is in the OFF mode. T urn “ON” to the desired FAN and/or COOL setting. Unit turned off by moving temperature to a higher number and then immediately turning back to a cooler number. Wait approxim[...]