Eclipse - Fujitsu Ten AVN2454 инструкция обслуживания

Be sure to read this installation manual thoroughly before carrying out installation and making connections. If installation methods or non-standard parts that are not specified in this installation manual are used, accidents or injury may result. Professional installation is recommended, contact the place of purchase to schedule an appointment. Af[...]

Components Components Check that all of the following components are present Check that all of the following components are present - 2 - GPS antenna components MAP DVD-ROM x 1 10 GPS antenna x 1 11 Waterproof cushion x 1 12 Ground plate x 1 13 Body protective sheet x 1 14 Interconnecting cable (Rear speaker connector) (6P) x 1 3 Interconnecting ca[...]

- 3 - Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the AVN2454. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property. Before reading through the manual, take time to read through and learn the important information lis[...]

- 4 - • When routing cables, use care so that they do not contact sharp metal parts such as brackets or screw tips. Otherwise, a short circuit, electric shock, fire or accident may result. • Play the audio at a moderate volume level that permits you to hear sounds from outside the car. Driving without being able to hear outside sounds may resul[...]

- 5 - Installation Diag Installation Diag r r am am GPS antenna (When installing inside the vehicle) 11 GPS antenna (When installing outside the vehicle) 11 • If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield will determine the accuracy of the GPS antenna to receive the GPS signal. If th[...]

Names and functions of ter Names and functions of ter minals minals - 6 - • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • The cables should be secured with tape or similar so that they will not cause an obst[...]

- 7 - B+ (Yellow) Connect where power is constantly available, regardless of the ignition key's position. ACC (Red) Connect where the power comes on when the ignition is in the ACC position. Illumination power supply (Orange/White) Connect to where power comes on when the vehicle light switch is turned on. Antenna power supply (Blue) Connect t[...]

E-LAN terminal (13P) Connect to the E-LAN terminal of the CD changer, etc. Genuine steering remote control terminal Connect to the vehicle steering remote control. ※ Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control. Ask your dealer for details. VIDEO OUT terminal (Yellow) Connect to a monit[...]

Notes on installation - 9 - • Check the vehicle speed pulse signal, parking brake signal and reverse signal carefully before making the connections. If the cables are incorrectly connected, accidents or problems with correct operation may result. • The label on the vehicle speed pulse signal cable contains a protection circuit, so do not cut th[...]

- 10 - Foot-operated Parking brake Parking brake Signal Cable Hand-operated Parking brake - An example for connecting the parking brake signal - Use the splicing connector to connect the parking brake signal connector (red/white) of the interconnecting cable to the parking brake signal cable. 4 1 Route the parking brake signal cable to the main uni[...]

- 11 - - Using the splicing connector - Insert the connection cable [vehicle speed pulse signal cable (purple/white), parking brake cable (red/white) or reverse cable (green)] and the vehicle cable into the splicing connector. 4 1 Push in the terminal (the metal part) of the splicing connector using a pair of pliers. 2 Harness in the car Vehicle sp[...]

- 12 - System connection e System connection e xample xample • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • The cables should be secured with tape or similar item so it will not cause an obstruction while d[...]

Tip - 13 - Installing the GPS antenna Installing the GPS antenna Notes on installation • The GPS antenna should be installed in a level position where the signals will be as unobscured as much as possible, such as on the vehicle's roof. Satellite signals cannot be received if the antenna is obscured. • If installing the GPS antenna outside[...]

- 14 - - Installation inside the vehicle (example) - Choose an installation location on the dashboard which is flat and has a clear view of the sky. 1 Install the ground plate to the dashboard. 2 Install the GPS antenna to the ground plate. 3 Ground plate 13 Secure the GPS antenna cable with clamps. 4 Route the GPS antenna cable along the crevice b[...]

- 15 - - Installation outside the vehicle (example) - Choose an installation location where the GPS antenna can be attached securely. 1 Remove the backing paper from the body protective sheet and attach the sheet to the vehicle. 2 Install the GPS antenna on top of the body protective sheet. 3 Body protective sheet (clear) 14 Route the GPS antenna c[...]

- 16 - Installing the main unit Installing the main unit Remove the pocket and any other accessories from the center cluster to make room for the main unit. 1 Remove the mounting brackets for the pocket. 2 30 ˚ or less Level (reference) Front - Installation angle - Mounting bolts Pocket, etc Center cluster panel Attach the brackets to the main uni[...]