Echo 99944200553 инструкция обслуживания

ProSweep Attachment Model 99944200553 Operator's Manual FOR MODELS: SRM-2400SB SRM-260SB/261SB P AS-2400 P AS-230/231 P AS-260/261 P AS-2601 P AS-265 X7702093401 X770001291 03/09 W ARNING Read rules for safe operation and instructions carefully . ECHO provides an Op- erator's Manual with this attachment and a separate Operator's Manu[...]

2 Copyright© 2009 By Echo, Incorporated All Rights Reserved. I n t r o d u c t I o n W elcome to the ECHO family . This ECHO product was designed and manufactured to provide long life and on-the-job- dependability . Read and understand this manual included with your attachment. Y ou will nd this manual easy to use and full of helpful operations[...]

P r o S w e e P A t t A c h m e n t o P e r A t o r ' S m A n u A l 3 s a f e t y m a n u a l s a f e t y s y m b o l s a n d I m p o r t a n t I n f o r m a t I o n I n t e r n a t I o n a l s y m b o l s Symbol description/application Symbol form/shape Symbol description/application Symbol form/shape Read and under- stand Operator's Man[...]

4 Physical Condition Y our judgment and physical dexterity may not be good: • if you are sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection W ear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the ProSweep attachmen[...]

P r o S w e e P A t t A c h m e n t o P e r A t o r ' S m A n u A l 5 Repetitive Stress Injuries -- It is believed that overusing the muscles and tendons of the ngers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk fo[...]

6 e q u I p m e n t W ARNING Use this attachment with ECHO approved models only . Serious injury may result from the use of this attachment combined with a non approved ECHO product. Before operation a complete check of the unit must be performed; • ECHO, INC. will not be responsible for the failure of sweeping devices, accessories and parts whic[...]

P r o S w e e P A t t A c h m e n t o P e r A t o r ' S m A n u A l 7 1 2 3 4 1. BRUSHES - Permanently attached to drum holders and come standard with 0.5 mm (0.018 in.) diameter nylon bristles. Optional .7 mm (0.028 in.) diameter brushes are available for ne material sweeping application. 2. LOWER DRIVE SHAFT ASSEMBL Y - Included separatel[...]

8 a s s e m b l y W ARNING Do not perform maintenance or assembly procdures with engine running. T ools Required: 4 & 5 mm Hex W rench Parts Requir ed: ProSweep Gear Housing, Lower Drive Shaft Assembly , P AS or SRM-SB Power Head w/Shaft & Coupling. p r o s w e e p g e a r h o u s I n g a s s e m b l y t o l o w e r C A B ___ 1 - Brushes / [...]

P r o S w e e P A t t A c h m e n t o P e r A t o r ' S m A n u A l 9 1. T urn gear housing assembly over so that gear housing mounting bolt (E) faces upward. 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position. CAUTION Thrown objects hazard. Install lower drive shaft so that gear hous- ing mounting bolt (E) f[...]

10 1. Hold unit on your right side resting sweeper brushes on work sur- face. 2. Firmly grasp throttle grip with right hand and front handle with left hand. 3. Position ProSweep at an angle to the work surface well out in front of your body . W ARNING The sweeper brushes rotate towards the operator . Do not operate ProSweep at an angle with brushes[...]

P r o S w e e P A t t A c h m e n t o P e r A t o r ' S m A n u A l 11 W ARNING Always stop engine and disconnect spark plug before performing maintenance procedures, otherwise serious injury may result. l u b r I c a t I o n m a I n t e n a n c e Y our ECHO attachment is designed to provide many hours of trouble free service. Regular schedule[...]

12 Drive Shaft IMPOR T ANT Lower and upper drive shaft must be lubricated with POWER BLENDX TM grease every 25 hours of operation, otherwise drive shaft assembly overheating and failure can result. 1. Remove gear housing locator screw (A). 2. Loosen gear housing mounting bolt (B). 3. Pull gear box from drive shaft housing. 4. Pull exible cable f[...]

P r o S w e e P A t t A c h m e n t o P e r A t o r ' S m A n u A l 13 b r u s h r e p l a c e m e n t Level 1. T ools Required: 8 mm Open End W rench, Cross Head Screwdriver Parts Requir ed: Standard Brush Assy .018 in. P/N 99944200551 QTY (2) Optional Brush Assy .028 in. P/N 25020225661 QTY (2) Brushes that are broken off, deformed, or worn [...]

14 s t o r a g e 1. Clean ProSweep attachment bristles with water . IMPOR T ANT Do not immerse this attachment in water . W ater will enter gear housing and damage gears, bearings and seals. 2. Apply thin coating of oil to metal parts to prevent rust. 3. Lubricate lower shaft assembly with grease. (Refer to Lubrication instructions.) 4. Store ProSw[...]

P r o S w e e P A t t A c h m e n t o P e r A t o r ' S m A n u A l 15 n o t e[...]

s e r v I c I n g I n f o r m a t I o n p a r t s / s e r I a l n u m b e r Genuine ECHO Parts and ECHO REPOWER™ Parts and Assem- blies for your ECHO products are available only from an Authorized ECHO Dealer . When you do need to buy parts always have the Model Number and Serial Number of the attachment with you. Y ou can nd these numbers on [...]