Denon Go Pack инструкция обслуживания

. WIIRELESS SPEAKER BATTERY AND BLUETOOTH FOR HEOS 1 Owner’s Manual HEOS 1 HEOS 1 Go Pack (Sold Separately) . Contents Setup Use Troubleshooting Status LED Appendix 1[...]

INTRODUCTION 6 BEFORE YOU BEGIN 7 System Requirements 7 Network Requirements 7 Controller Requirements 8 Getting To Know Your Speaker 9 Getting To Know Your Battery (Sold Separately) 10 Front panel 11 Controls 12 Back panel 13 Placing Your HEOS device 15 Wall or Ceiling Mounting 15 Powering Your Speaker 16 Getting the HEOS App 16 SETTING UP YOUR FI[...]

Stereo Pairing 32 Creating a Stereo Pair 32 Changing the Name of a Stereo Pair 34 Adjusting the Balance 34 Swapping Left and Right Channels in a Stereo Pair 35 Removing a Stereo Pair 35 Using the Now Playing Queue 36 Play Now 36 Play Now & Replace Queue 36 Play Next 36 Add to End of Queue 36 Rearranging the Now Playing Queue 37 Deleting Songs f[...]

UPDATING YOUR SYSTEM 43 ADVANCED FEATURES 44 Submit Diagnostics 44 Sharing Music from your Mobile Device 44 Resetting Your Controller App 44 POWER MANAGEMENT 45 Power Modes 45 Network Standby 45 Deep Standby 45 Off 45 SETTING UP HEOS 1 Go Pack 46 Connecting the battery 46 Charging the battery 47 Connecting the Bluetooth adapter 47 Pairing the HEOS [...]

Status LED Table 57 Battery indicator of HEOS 1 Go Pack 65 When connected to the AC charger/power supply (charging) 65 When running on battery power 65 Supported File Types and Codecs 66 SPECIFICATIONS 67 Speaker Specifications 67 HEOS 1 67 INFORMATION 69 Trademarks 69 License 70 License Information for the Software Used in the Unit 70 Contents Set[...]

Thank you for purchasing this HEOS product. To ensure proper operation, please read this owner’s manual carefully before using the product. NOTE THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. For latest information, please visit HEOSbyDenon.com INTRODUCTION The HEOS speaker is part of the HEOS wireless multi-room sou[...]

BEFORE YOU BEGIN NOTE If you have already installed at least one HEOS device, please skip to the section “ADDING MORE HEOS DEVICES” ( v p. 18). System Requirements Before you begin installing your first HEOS speaker, please make sure you understand and meet a few basic requirements. o Network Requirements Wireless Router - In order to use your [...]

o Controller Requirements You can control your HEOS wireless multi-room sound system using the free HEOS app on any iOS or Android mobile device that meets these minimum requirements: . iOS Minimum Requirements 0 iOS version 7.0 or later 0 iPhone ® 4 or newer 0 iPad ® 2 or newer 0 iPod touch ® (5th generation) or newer . Android Minimum Requirem[...]

Getting To Know Your Speaker Unpack your speaker from the box and verify that the following items are included: . QUICK STRT GUIDE Quick Start Guide Safety Instructions Wa r r a n t y (North America model only) Extended Protection Plan (North America model only) Audio/Setup cable Ethernet cable (North America model only) (European model only) HEOS [...]

Getting To Know Your Battery (Sold Separately) Unpack your battery from the box and verify that the following items are included: . QUICK STRT GUIDE Rechargeable battery Bluetooth USB adapter and Splashguard Quick Start Guide Safety Instructions W arranty (North America model only) Extended Protection Plan (North America model only) Contents Setup [...]

o Front panel . q q w w HEOS 1 HEOS 1 + Go Pack A Speakers B Status LED Please refer to the “Status LED Table” for LED color and state meaning “Status LED Table” ( v p. 57). Contents Setup Use Troubleshooting Status LED Appendix 11[...]

o Controls . q w A Mute button ( : ) Mutes or unmutes the HEOS device’s volume. B Volume Up/Down buttons (+, –) Adjusts the HEOS device’s volume level up or down. Contents Setup Use Troubleshooting Status LED Appendix 12[...]

o Back panel . y i u t e Q0 w q r o Q 1 Q 2 HEOS 1 HEOS 1 + Go Pack A Threaded Mounting Hole Used to mount this unit on a wall or ceiling. B Safety Wiring Hole Used to prevent from dropping. C USB Input (USB 5V/1A) Used to connect USB storage devices. D Reset Button (RESET) Various settings are reset to the factory default values ( v p. 54). E Powe[...]

. i Q0 o Q1Q2 u HEOS 1 HEOS 1 + Go Pac k G Network Connector (NETWORK) Used to connect this unit to a wired Ethernet network ( v p. 18). H Connect Button (CONNECT) 0 Used for Wi-Fi setup ( v p. 54). 0 Used in the Bluetooth pairing settings ( v p. 48). I Connect in Status LED Indicates the status of this unit ( v p. 54, 57). J Cap Close this cap sec[...]

Placing Your HEOS device You can place your HEOS device anywhere you want to enjoy great sounding music. Please follow these simple guidelines when determining where to place your speaker… 0 The HEOS device must be within range of your wireless network. 0 The HEOS speaker is designed to sound best when placed 3 to 12 inches (8 - 30 cm) from a wal[...]

Powering Your Speaker Connect the power cord included in the box to the back of the speaker and the plug to a wall outlet. The speaker is capable of automatically switching between 100 - 240 V. . Getting the HEOS App The HEOS app is the heart of the HEOS experience. Using your mobile device and the HEOS app, you can setup, browse, explore, and cont[...]

SETTING UP YOUR FIRST HEOS SPEAKER Once you have placed your speaker in your listening room and have downloaded the HEOS app, you are ready to configure your speaker for music playback. This involves following a few simple steps to get the speaker connected to your existing home network: Caution DO NOT connect the Ethernet cable if you are connecti[...]

ADDING MORE HEOS DEVICES The HEOS wireless multi-room sound system is a true multiroom audio system that automatically synchronizes audio playback between multiple HEOS devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 HEOS devices to your HEOS system. Adding Wired Spea[...]

USING YOUR HEOS DEVICE Once you have your HEOS device connected to your network and the HEOS app installed on your mobile device, it’s easy to start enjoying your favorite music. You can listen to something different on every HEOS devices or the same music perfectly synchronized on all HEOS devices. It’s up to you! Selecting a Room/Speaker If y[...]

Listening to Radio The HEOS system includes access to more than 100,000 free internet radio streams from all corners of the globe via the TuneIn radio service. Just select the TuneIn logo from the main Music menu and browse among the 100,000 stations neatly organized into popular categories and select a station that appeals to your mood. NOTE If yo[...]

Playing music from your networked PC or NAS 1 Select “Music Servers” from the Music tab. 2 Select the name of your networked PC or NAS (network attached storage) server. 3 Browse the music on your PC/NAS and select something to play. . NAS (Network Attached PC Storage) PC Audio signal Contents Setup Use Troubleshooting Status LED Appendix 21[...]

Playing music from the AUX input 1 Connect an audio device with a 3.5 mm stereo audio output to the AUX input on your speaker using the included 3.5 mm stereo audio cable. When a stereo audio cable is connected to AUX IN, the source automatically switches to Inputs. NOTE When there is a cable connected to AUX IN, select “Inputs” from the Music [...]

Playing music from a USB device 1 Insert a FAT32 formatted USB device into the USB port on the back of the HEOS system. 2 Select “USB Music” from the “Music” tab. 3 Select the name of your HEOS system. 4 Browse the music on your USB device and select something to play. NOTE 0 It may take several minutes for the name of your HEOS device to a[...]

HEOS account o What is a HEOS account? A HEOS account is master account or “keychain” for managing all of your HEOS music services with one single username and password. o Why do I need a HEOS account? With the HEOS account you just have to enter your music services login names and passwords one time. This allows you to easily and quickly use m[...]

Playing from Streaming Music Services A Music Service is an online music company that provides access to vast music collections via free and/or paid subscriptions. Depending upon your geographical location, there are several options to choose from. For more information about which services are available in your area please visit HEOSbyDenon.com o A[...]

Managing Inputs If you connected external audio source components (like CD players, portable music players, Cable Boxes, etc...) to any of your HEOS speakers inputs, you can rename the default input names to describe the actual source or hide any inputs that are not being used. 1 Select the Settings a icon located in the upper left corner of the ma[...]

Managing your Phone Your smartphone or tablet can be hidden if it does not need to be in the “Music Sources” menu. 1 Select the Settings a icon located in the upper left corner of the main Music menu to display the Settings menu. 2 Select “Music Sources”. 3 Select “This iPhone/iPod/iPad/Phone”. 4 Toggle “This iPhone/iPod/iPad/Phone”[...]

Listening To The Same Music In Multiple Rooms The HEOS system is a true multiroom audio system that automatically synchronizes audio playback between multiple HEOS devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 HEOS devices to your HEOS system. You can join or group [...]

o Ungrouping Rooms 1 Tap the “Rooms” tab. 2 Press and hold your finger on room that you want to remove from the group. NOTE You can not remove the first room that started playing the music before grouping. 3 Drag it out of the group and lift your finger. 4 Music will stop playing in the room you dragged out of the group but will continue playin[...]

o Grouping All Rooms (Party Mode) You can easily group the eight rooms together into Party Mode by using a “pinch” gesture. 1 Tap the “Rooms” tab. 2 Place two fingers on the screen over the list of rooms. 3 Quickly pinch your two fingers together and release. 4 All of your rooms will be joined together and begin playing the same music in pe[...]

o Ungrouping All Rooms You can easily ungroup all of your rooms and exit Party Mode by using a “spread” gesture. 1 Tap the “Rooms” tab. 2 Place two fingers close together on the screen over list of rooms. 3 Quickly spread your two fingers apart from each other and release. 4 All of your rooms will be ungrouped and music will stop playing in[...]

Stereo Pairing o Creating a Stereo Pair A matching pair of speakers that have been grouped together (see above) can be saved as a persistent stereo pair where one speaker outputs the left channel of audio and the other speaker outputs the right channel of audio. Paired speakers will then appear as a single Room (with two speakers playing music) in [...]

5 Tap on the Stereo Pair switch to pair the two speakers. 6 Tap the Back arrow to return to the list of Rooms. 7 Tap the Check Mark i icon to exit Edit mode. The group of two matching speakers will now appear as a single Room. You can change the name of the stereo paired room at any time. . 5 6 Rooms Drag one room into another to group them Rooms N[...]

o Changing the Name of a Stereo Pair 1 Tap the “Rooms” tab. 2 Tap the Pencil e icon to enter Edit mode. 3 Tap a Stereo Pair (a room which contains two HEOS 1 speakers) to edit the group. 4 Tap “Name”. 5 Select or enter a new name for your pair of speakers. 6 Tap the Save i button to save your changes. o Adjusting the Balance 1 Tap the “Ro[...]

o Swapping Left and Right Channels in a Stereo Pair 1 Tap the “Rooms” tab. 2 Tap the Pencil e icon to enter Edit mode. 3 Tap a Stereo Pair (a room which contains two HEOS 1 speakers) to edit the group. 4 Tap on the Swap L&R switch to swap the left and right channels of the two speakers. 5 Tap the Back arrow to return to the list of Rooms. 6[...]

Using the Now Playing Queue HEOS uses a Now Playing “Queue” to line up music that you want to listen to. Music can be selected from any of your local or online music sources (as long as they are not preprogrammed “radio” or “station” type streams). This feature works similarly to how a jukebox works. You select something to play (a song[...]

Rearranging the Now Playing Queue Once you have songs lined up in your queue, you might want to rearrange the order or remove some songs: 1 Tap the “Now Playing” tab. 2 Tap the Queue d icon in the upper right corner of the screen. 3 Tap the Pencil e icon to enter Edit mode. 4 Rearrange the order of your queue by dragging the list f icon (on the[...]

Deleting All Songs from the Play Queue You can remove all of the songs from the Now Playing queue: 1 Tap the “Now Playing” tab. 2 Tap the Queue d icon in the upper right corner of the screen. 3 Tap the Delete g icon to confirm that you want to delete all songs from the queue. Saving Playlists You can save the Now Playing queue as a HEOS Playlis[...]

MAKING SPEAKER ADJUSTMENTS You can adjust specific settings for each of your HEOS Speakers in your system: 1 Select the Settings a icon located in the upper left corner of the main Music menu to display the Settings menu. 2 Select “My Devices” to display a list of your HEOS devices. 3 Select the speaker you want to adjust. Changing the Name of [...]

Changing the Speaker’s Equalizer 1 Select “EQ”. 2 Adjust the Treble or Bass up or down. NOTE Select the Reset button to restore the default settings. Adjusting the Audio Quality Selects the transcoding option for rebroadcasting audio from one HEOS device to another HEOS device (or group of devices) across the network. When set to “Normal”[...]

Advanced Speaker Settings Caution Adjusting these settings may disconnect your speaker from your network and possibly render your speaker unusable. Do not use these features unless you are comfortable making advanced adjustments to your speaker. o Network Settings 1 Select “Advanced”. 2 Select “NETWORK SETTINGS” tab. 3 Scroll down to see al[...]

o Firmware Upgrade 1 Select “Advanced”. 2 Select “FIRMWARE UPGRADE” tab. 3 Manually check for a firmware upgrade. o About Viewing technical details about the HEOS device. 1 Select “Advanced”. 2 Select “ABOUT” tab. 3 Scroll down to see information about the speaker’s a. Hardware b. Software c. Device Contents Setup Use Troubleshoot[...]

UPDATING YOUR SYSTEM HEOS has the ability to add enhancements and updated functionality via your high speed Internet connection. When such updates become available, you will be notified when you open the HEOS app. Follow the instructions on the screen to update the HEOS device and/or your controller App. In the event that you wish to manually initi[...]

ADVANCED FEATURES There are a few advanced features of the HEOS system that you may want to explore once you become familiar with the basic operations. You can access the advanced features of the HEOS system by following these steps: 1 Select the Settings a icon located in the upper left corner of the main Music menu to display the Settings menu. 2[...]

POWER MANAGEMENT Power Modes o Network Standby To save power, the device will automatically enter “Network Standby” whenever there is no network access or playback for 20 minutes and will automatically resume to full power whenever the device is selected and playing music. The front panel LED will be dimmed during “Network Standby” as it is[...]

SETTING UP HEOS 1 Go Pack Before using a new HEOS 1 speaker with Bluetooth, we recommend you first connect your HEOS 1 Speaker to your home network to get the latest speaker updates and newest features. A home network is not required for every day Bluetooth functionality. Connecting the battery 1 Remove the cap from the bottom of the HEOS 1 speaker[...]

Charging the battery To charge the battery, connect the HEOS 1 power adapter between the speaker and a wall outlet. . 0 It takes at least 3.5 hours to fully charge the battery when it is completely discharged ( v p. 65). 0 HEOS 1 Go Pack can be used for approximately 6 hours when the battery is fully charged. (The playback time may differ depending[...]

Pairing the HEOS 1 with your devices 1 Activate the Bluetooth setting on your mobile device. . Bluetooth 2 Press and hold the Connect button located on the back of the HEOS 1 speaker (under the right side of the cap) for 3 seconds and release the button when you see a pattern of two flashes on the status LED. . 3 Select "HEOS 1" from the [...]

CLOSE SPLASHGUARD 1 Remove the power connector from the speaker. 2 Press in the Splashguard so that it is firmly and evenly attached. . Properly attaching the splashguard will make your HEOS 1 speaker waterproof to the IPX4 standard. DO NOT submerge the speaker in water! TURNING OFF/ON THE BATTERY To turn off the battery, press and hold the button [...]

BASIC TROUBLESHOOTING My speaker won’t connect to my network using the audio cable Solution Refer to Page 0 Make sure your mobile device is connected to your wireless network before setting up your speaker. 17 0 Alternatively, you can connect your speaker to your network router using the included Ethernet cable. Once connected via Ethernet, the H[...]

The front LED of HEOS 1 flashes repeatedly Solution Refer to Page 0 When the battery level is near zero the front LED of the HEOS 1 may flash repeatedly. This indicates that there is insufficient power in the battery to boot up the speaker. Please connect the AC adapter to the speaker which will charge the battery. The speaker can be used as normal[...]

Cannot hear Bluetooth music Solution Refer to Page 0 Your Bluetooth mobile device is not paired with HEOS 1. Follow the pairing procedure. 48 0 HEOS 1 is off. Connect HEOS 1 to AC power or turn on the HEOS 1 battery by pressing battery power button for 2 seconds. Check the AC power outlet is working. － 0 HEOS 1 battery is fully depleted. Check th[...]

Music cuts out or delays sometimes Solution Refer to Page 0 Make sure your Internet connection is operating correctly. If you are sharing your network with other users or devices, they may be using most of your bandwidth (especially if they are streaming video). 7 0 Make sure your speakers are within range of your wireless network. 7 0 Make sure yo[...]

Connecting to a WPS Network Solution Refer to Page If your wireless router support WPS (Wi-Fi Protected Setup™) your HEOS Wireless Speaker can optionally connect to your network using the “Push Button” method by following these steps: 1. Press the WPS button on your router. 2. Within 2 minutes, rapidly press the Connect button 3 times (within[...]

Restoring the Speaker to Factory Defaults Solution Refer to Page Restoring the HEOS device to its factory defaults will clear all of the settings and restore the original software which was installed at the factory. Caution 0 All settings will be erased and the software will likely be downgraded! To restore your HEOS device to the factory defaults,[...]

Contact Denon For U.S. & Canada only: If you need further assistance with your HEOS product, please contact HEOS by Denon Customer Support Services below: Website: www.HEOSbyDenon.com/Support Email: Support@HEOSbyDenon.com Live Chat: www.HEOSbyDenon.com/LiveChat Telephone: Toll Free (855) 499 2820 (M-F 10:00AM to 10:00PM EST / Sat 12:00PM to 8:[...]

Status LED Table Device Operation Description Front LED Action Rear LED Action Off No AC power or Deep Standby . (off) . (off) Plug in Booting . (blink) . (off) On Ready-Configured and connected to your network . (solid) . (off) On Not Connected to your network . (solid) . (solid) Contents Setup Use Troubleshooting Status LED Appendix Status LED 57[...]

Device Operation Description Front LED Action Rear LED Action Change Network Connecting to your network . (blink) . (off) Setup Not connected . (solid) . (solid) Connect button was pressed . (blink) . (blink) Cable connection is OK . (solid) . (solid) Contents Setup Use Troubleshooting Status LED Appendix 58[...]

Device Operation Description Front LED Action Rear LED Action Connecting to your network . (blink) . (off) Configured and connected to your network . (solid) . (off) Error . (solid) . (solid) Update Updating . (blink) . (blink) Contents Setup Use Troubleshooting Status LED Appendix 59[...]

Device Operation Description Front LED Action Rear LED Action Rebooting . (blink) . (off) Ready-Configured and connected to your network . (solid) . (off) Reset Soft reset - Clear user settings . (fast blink) . (solid) Hard reset - Factory restore . (blink) . (solid) Contents Setup Use Troubleshooting Status LED Appendix 60[...]

Device Operation Description Front LED Action Rear LED Action Rebooting . (blink) . (off) Ready-Not Configured . (solid) . (solid) Errors Firmware Error . (slow blink (NOT fade)) . (off) Hardware Error . (fast blink) . (off) Contents Setup Use Troubleshooting Status LED Appendix 61[...]

Device Operation Description Front LED Action Rear LED Action Network Error . (solid) . (solid) Volume Change . (quick blink) . (off) Mute . (slow blink) . (off) WPS a WPS session is active . (fast blink) . (fast blink) Contents Setup Use Troubleshooting Status LED Appendix 62[...]

Device Operation Description Front LED Action Rear LED Action WPS connected . (for 3 sec. solid) . (solid) WPS time-out . (for 3 sec. solid) . (solid) Power Management Network Standby . (dimmed solid) . (off) Deep Standby . (off) . (off) Contents Setup Use Troubleshooting Status LED Appendix 63[...]

Device Operation Description Front LED Action Rear LED Action Bluetooth Bluetooth pairing is active . (two blinks) . (two blinks) Connected （ No Network) . (one blink) . (off) Bluetooth pairing is failed . (for 3sec. solid) . (for 3sec. solid) Contents Setup Use Troubleshooting Status LED Appendix 64[...]

Battery indicator of HEOS 1 Go Pack The battery indicator uses 4 LEDs to indicate the approximate time remaining on the internal battery and the status of the charge process when connected to an AC power source. o When connected to the AC charger/power supply (charging) The battery indicator is always lit when charging. Mode Battery Status LED Char[...]

Supported File Types and Codecs Frequency Sample Rate File Extension Codec Bit Rates 32 kHz 44.1 kHz 48 kHz 16 bit wav PCM --- 32 kHz 44.1 kHz 48 kHz 16 bit mp3 MPEG-1 Audio Layer 3 CBR/VBR 32 - 320 kbps 32 kHz 44.1 kHz 48 kHz 16 bit m4a aac AAC-LC 48 - 320 kbps 32 kHz 44.1 kHz 48 kHz 16 bit wma wma9 CBR CBR:48 - 192 kbps 44.1 kHz 48 kHz 16 bit fla[...]

SPECIFICATIONS Speaker Specifications o HEOS 1 Wireless LAN Network type: Conforming to IEEE 802.11a/b/g/n Used frequency range: 2.4 GHz, 5 GHz General Operating temperature: 41 °F - 95 °F (5 °C - 35 °C) Power supply: AC 100 – 240 V, 50/60 Hz Power consumption: 20W Power consumption in network standby mode: 4.5W Power consumption in deep stan[...]

Dimensions Unit : in. (mm) . 5 1/16 (128) 5 1/16 (129) 7 7/16 (189) 5 1/4 (134) 5 1/16 (129) 8 7/16 (214) Weight: HEOS 1 : 3 lbs 1.4 oz (1.4 kg) HEOS 1 + Go Pack : 3 lbs 12.0 oz (1.7 kg) For the purpose of improvement, the specifications and design are subject to change without notice. Contents Setup Use Troubleshooting Status LED Appendix 68[...]

INFORMATION Trademarks . Google Play is a trademark of Google Inc. . Apple, the Apple logo, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. . Wi-Fi Protected Setup™ logo is trademark of Wi-Fi Alliance. . The Bluetooth ® word mark and logos are regist[...]

License o License Information for the Software Used in the Unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is use[...]

n e2fsprogs-libs-1.40.8/lib/uuid Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, and the entire permission notice in its entirety, including the disclaimer of warranties. 2. Redistr[...]

n getopt http://cvsweb.netbsd.org/bsdweb.cgi/src/lib/libc/stdlib/ Copyright (c) 1987, 1993, 1994 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retai[...]

n libpcap-1.4.0 License: BSD Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce t[...]

n mDNS 320.10.80 The majority of the source code in the mDNSResponder project is licensed under the terms of the Apache License, Version 2.0, available from: <http://www.apache.org/licenses/LICENSE-2.0> To accommodate license compatibility with the widest possible range of client code licenses, the shared library code, which is linked at runt[...]

n openssl-1.0.0d Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaim[...]

n portmap-6.0 Copyright (c) 1990 The Regents of the University of California. z All rights reserved. z Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and th[...]

n rl78flash 2000.3.1 License ======= The MIT License (MIT) Copyright (c) 2012 Maxim Salov Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, me[...]

n strlcpy.c , v1.11 z Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com> z Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. z THE SOFTWARE IS PROVIDED “AS IS” AND THE AUTH[...]

n Tremor http://wiki.xiph.org/index.php/Tremor Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disc[...]

[...]

HEOSbyDenon.com 3520 10391 00ADA Copyright © 2015 D&M Holdings Inc. All Rights Reserved. 80[...]