Denon ADV-M71 инструкция обслуживания

B BAND PHONES VOLUME ON / STANDBY DVD SURROUND RECEIVER ADV-M71 TONE / SDB FUNCTION MENU/ SET + - SURROUND / SELECT PUSH - PARAM. VIRTUAL SPEAKER + - + - RC-936 A / V 3 A-B REPEAT SEARCH MODE ON OFF REPEAT RANDOM CLEAR ZOOM SLIDE MODE PROG/DIRECT MEMO BAND MODE STAT US RETURN ANGLE AUDIO SUB TITLE SETUP TONE /SDB FUNCTION SURROUND INPUT MODE TEST T[...]

2 2 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE P AR TS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence [...]

3 SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. 4. [...]

4 ENGLISH 2 INTRODUCTION 2 ACCESSORIES Thank you for choosing the DENON ADV -M71 DVD Surround Receiver . This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favo rite music sources. As this product is provi[...]

5 ENGLISH • This is an anti-magnet type speaker system which can be used near television sets, etc., but with some TV sets the colors may become blotchy . If this happens, turn off the TV’ s power , wait 15 to 30 minutes, and turn the power back on. The TV’ s self demagnetizing circuit will improve the picture. If the colors are still blotchy[...]

6 ENGLISH 5 DISCS • The types of discs listed on the table below can be used on the ADV-M71. The marks are indicated on the disc labels or jackets. Usable discs Mark (logo) Recorded signals Disc size DVD video DVD audio (NOTE 1) Digital audio + digital video (MPEG2) 12 cm 8 cm 12 cm 8 cm 12 cm 12 cm 8 cm Digital audio + digital video (MPEG1) Digi[...]

7 ENGLISH 6 CAUTIONS ON HANDLING DISCS Discs Only the discs including the marks shown on page 6 can be played on the ADV -M71. Note, however , that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the ADV -M71. Do not attempt to play such discs, as they may damage the player . Cautions on Handling Discs • [...]

8 ENGLISH R L R L R L R L R L R L 7 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely . Incomplete connections will result in the generation of noise. • Note that binding pin plug cords [...]

9 ENGLISH AC 120V 60Hz UNSWITCHED 60W MAX AC OUTLET AC 120V 60Hz UNSWITCHED 60W MAX AC OUTLET B VIRTUAL SPEAKER B VIRTUAL SPEAKER CAUTION: • Only one cassette deck can be connected to the ADV -M71 using system connections. System operations cannot be performed properly if two cassette decks are connected using system connections. • Whenever the[...]

10 ENGLISH L R AUDIO OUT L R L R OUT IN L R AUDIO OUT OPTICAL B R L L R L R L R L R R L (3) Connecting the Audio Signals of a Digital Satellite T uner and VCR • Connect the video signals directly to the TV and switch the picture on the TV . • When making connections, also refer to the operating instructions of the other components. Connection t[...]

11 ENGLISH (4) Connecting a TV • When making connections, also refer to the operating instructions of the TV . S VIDEO TV S VEDEO OUT • Connect the TV’ s S video input (S-VIDEO INPUT) to the OUT jack using a S jack connection cord. VIDEO OUT • Connect the TV’ s video input (VIDEO INPUT) to the VIDEO jack using a video connection cord. S-V[...]

12 ENGLISH 1 4 2 3 (5) Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION 75 Ω /ohms COAXIAL CABLE FM ANTENNA FM INDOOR ANTENNA (Supplied) AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND AM loop antenna assembly Connect to the AM antenna terminals. Remove the vinyl tie and take out the connection line. Bend in the reverse d[...]

13 ENGLISH COMPONENT VIDEO IN P B /C B P R /C R Y (6) Connecting to a TV or Monitor Equipped with Component Input Connectors. • When making connections, also refer to the operating instructions of the other components. • The video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component[...]

14 ENGLISH (7) Sound output from this unit digital and analog audio output connectors 2 When a disc is played on the ADV -M71 (DIGITAL OUT) Refer to page DVD video DVD audio (video part only) Audio recording format Dolby Digital CP : ON Video CD CP : OFF DTS 48 kHz • Linear PCM audio is the signal recording format used for music CDs. While the si[...]

15 ENGLISH (8) Removing the speaker net (D-M71DVS only) • The net on the front of the speaker system is detachable. • T o remove it, grasp it on both sides and pull it towards you. • T o attach the net, line up the plastic pieces holes out of the net with the sticking in the cabinet and press in. • This unit is equipped with a high-speed pr[...]

16 ENGLISH 8 P ART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). B BAND PHONES VOLUME ON / STANDBY DVD SURROUND RECEIVER ADV-M71 TONE / SDB FUNCTION MENU /SET + - SURROUND / SELECT PUSH - PARAM. VIRTUAL SPEAKER !4 !3 !2 !1 !0 oi u y t r e w q q Power button (ON/ST ANDBY[...]

17 ENGLISH q T ransmission indicator w Sleep timer button ...................................................................(90) e NTSC/P AL button .....................................................................(11) r Clear button ..............................................................................(70) t A-B repeat button .........[...]

18 ENGLISH Names and functions of remote control unit buttons on the ADV -M71 • Buttons in sections q ~ e can be operated regardless of the position of mode switches 1 and 2. • Consider and as standard positions, and switch as necessary to operate. DVD A / V + - + - RC-936 A / V 3 A-B REPEAT SEARCH MODE ON OFF REPEAT RANDOM CLEAR ZOOM SLIDE MOD[...]

19 ENGLISH 3 Operate the ADV -M71. [1] Surround amplifier system buttons (Operated with mode switch 2 set to “ IN/SURR. ” ) • These operations are possible with mode switch 1 at any position. The operations in gray print can be performed. + - + - RC-936 A / V 3 A-B REPEAT SEARCH MODE ON OFF REPEAT RANDOM CLEAR ZOOM SLIDE MODE PROG/ DIRECT MEM[...]

20 ENGLISH 3 [3] T uner system buttons (Operated with mode switch 2 set to “ TUNER ” ) + - + - RC-936 A / V 3 A-B REPEAT SEARCH MODE ON OFF REPEAT RANDOM CLEAR ZOOM SLIDE MODE PROG/ DIRECT MEMO BAND MODE STAT US RETURN ANGLE AUDIO SUB TITLE SETUP TONE /SDB FUNCTION SURROUND INPUT MODE TEST TONE DVD TUNER CH 3 - + 2 1 6 5 4 9 8 7 0 / 10 CALL ENT[...]

21 ENGLISH 9 REMOTE CONTROL UNIT • The included remote control unit (RC-936) can be used to operate not only this unit but other remote control compatible DENON components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non- DENON remote control compatible products. (1) In[...]

22 ENGLISH • The included remote control unit (RC-936) can be used to operate not only the ADV -M71 but also to perform system operations for the D-M31 series and to operate other remote control compatible DENON products. In addition, the remote control operation codes of other major brands of TVs and video decks are also stored in the remote con[...]

23 ENGLISH (4) TV and video deck preset memories • Components of other brands can be operated with the included remote control unit by storing their codes in the preset memory . Note that depending on the model some operations may not be possible and some buttons may not operate properly . + - + - RC-936 A / V 3 A-B REPEAT SEARCH MODE ON OFF REPE[...]

24 ENGLISH Combinations of preset codes for different brands Fujitsu 004, 062 Funai 004, 062 Futuretech 004 GE 020, 036, 037, 040, 044, 058, 066, 088, 119, 120, 125, 147 Goldstar 015, 029, 031, 039, 048, 051, 056, 057, 067, 068, 069, 116, 165 Grundy 062 Hitachi 029, 031, 051, 052, 070, 111, 112, 113, 124, 134 Hitachi Pay TV 151 Infinity 017, 071 Ja[...]

25 ENGLISH National Quenties 002 NEC 031, 038, 039, 048, 057, 084, 086, 135, 147 Nikko 054 NTC 054 Optimus 128 Optonica 011, 012, 093, 121 Orion 004, 139 Panasonic 002, 009, 017, 036, 037, 071, 141, 143, 147 Philco 005, 010, 030, 050, 051, 056, 079, 085, 127, 131, 132, 145, 147 Philips 005, 015, 017, 050, 051, 056, 078, 087, 088, 089, 131, 132, 147[...]

26 ENGLISH VCR Admiral 081 Aiko 095 Aiwa 009 Akai 026, 027, 070, 072, 082, 083, 084 Alba 055 Amstrad 009 ASA 042 Asha 087 Audio Dynamic 005, 085 Audiovox 088 Beaumark 087 Broksonic 086, 093 Calix 088 Candle 006, 087, 088, 089, 090 Canon 049, 057 Capehart 025, 055, 056, 071 Carver 015 CCE 095 Citizen 006, 007, 087, 088, 089, 090, 095 Craig 007, 087,[...]

27 ENGLISH Randex 088 RCA 007, 013, 019, 023, 058, 063, 064, 065, 073, 080, 082, 087 Realistic 009, 021, 031, 033, 049, 053, 081, 087, 088, 091, 094, 097, 098 Ricoh 055 Salora 033, 041 Samsung 007, 011, 051, 059, 070, 083, 087, 089, 113 Sanky 081 Sansui 005, 026, 029, 045, 061, 085, 114 Sanyo 032, 033, 053, 087, 091, 115, 116 SBR 042 Scott 017, 020[...]

28 ENGLISH (5) Operating the TV/video deck after storing its remote control signals in the preset memory + - + - RC-936 A / V 3 A-B REPEAT SEARCH MODE ON OFF REPEAT RANDOM CLEAR ZOOM SLIDE MODE PROG/ DIRECT MEMO BAND MODE STAT US RETURN ANGLE AUDIO SUB TITLE SETUP TONE /SDB FUNCTION SURROUND INPUT MODE TEST TONE DVD TUNER CH 3 - + 2 1 6 5 4 9 8 7 0[...]

29 ENGLISH Speaker 2CH Virtual & SW Set the screen size and the speaker system. TV Aspect 4:3 PS LINE-1 LINE-2 REC OUT MD T APE ON Function Setting Set the LINE-1 and LINE-2 function names and turn the analog recording output (REC OUT) on or off. 3 S TATU S RETURN ANGLE AUDIO SUB TITLE SET UP TONE / SDB ENTER MUTING DISPLAY MENU TOP MENU SURROU[...]

30 ENGLISH (2) Quick setup procedure • Refer to “ Connections ” (pages 8 to 15) and check that all the connections are correct. 1 T urn on the power . • The power indicator (LED) lights green, the power turns on and the display lights. ON / STANDBY ON Several seconds are required from the time the power button is pressed until the power tur[...]

31 ENGLISH 4 Press the ENTER button to display the menu ’ s setting screen. On the setting screen, the selected item is displayed in yellow and the values of the other items are displayed in green. ENTER Remote control unit [1] TV screen size setting • The currently set value is displayed in yellow . 5 Use the • and ª cursor buttons to selec[...]

32 ENGLISH 9 Use the • and ª cursor buttons to select “ Room Settings ” , then use the 0 and 1 cursor buttons to set the size of the room. • The set size is displayed in yellow . Remote control unit 10 Use the • and ª cursor buttons to select “ Listening Position ” , then use the 0 and 1 cursor buttons to set the position. • The s[...]

33 ENGLISH (3) Detailed system setup (changing the system settings) • The quick system settings and original settings set upon shipment from the factory are changed using the system setting changing menu. The settings are stored in the memory until they are changed the next time, and remain valid even when the power is turned off. [1] Speaker set[...]

34 ENGLISH NOTE: • Select the speaker size not by the physical size of the speaker but by the speaker ’ s capacity to reproduce low frequencies of 100 Hz or less. If you do not know , determine the best setting by comparing the sound when the setting is set to “ Small ” and “ Large ” , keeping the volume low enough to prevent damage to [...]

35 ENGLISH [2] Delay time (distance setting) • Input the distances from the listening position and the various speakers to set the surround delay time. • Upon shipment from the factory default the delay time is set to the default values in step 3 below . Preparation: Measure the distance from the listening position to the various speakers. FR F[...]

36 ENGLISH [3] Adjusting the channel level • Adjust so that the playback levels of the different channels are equal. • Make this adjustment by listening to the test tones output from the speakers at the listening position. • By factory default all the levels of all the channels are set to 0 dB. • This adjustment can also be made directly fr[...]

37 ENGLISH 7 Press the ENTER button to enter the settings. • The next screen in the system setting changing menu appears. ENTER Remote control unit T o cancel the settings after the adjustments have been made Display the channel level adjustment screen, then use the • , ª , 0 and 1 cursor buttons to select “ Level Clear ” and select “ Ye[...]

38 ENGLISH 4 Press the ENTER button to enter the settings. • The next screen in the system setting changing menu appears. ENTER Remote control unit Input function settings • LINE-1 and LINE-2 can be set as described below . LINE-1 : “ MD ” , “ CD-R ” , “ MD/CD-R ” or “ AUX ” can be selected. ( “ MD/CD-R ” can only be set whe[...]

39 ENGLISH 2 Set discs in the disc tray with the labeled (printed) side facing up. 8 cm disc guide Disc tray NOTE: • Do not move the this unit while a disc is playing. Doing so may scratch the disc. (1) Opening and Closing the Disc T ray q T urn on the power . w Press the OPEN/CLOSE button. Disc tray OPEN/CLOSE button NOTES: • Even when the pow[...]

40 ENGLISH IMPORT ANT SETUP INFORMA TION This set has the following presettings: “ DISC SETUP ” , “ OSD SETUP ” , “ VIDEO SETUP ” , “ AUDIO SETUP ” , “ RA TINGS ” , and “ OTHER SETUP ” . These presettings have been preset upon shipment from the factory . If you wish to change them to suit your specific purposes, refer to pag[...]

41 ENGLISH 6 Use the cursor buttons ( • , ª , 0 and 1 ) to select the desired item. • For some discs there is a second menu screen. If so, press the 9 button to display the next menu screen. (See the disc ’ s jacket.) The cursor buttons ( • , ª , 0 and 1 ) do not work for video CDs. Use the number buttons to select the desired item. Remot[...]

42 ENGLISH 1 During playback, press the 13 button on the main unit or the 3 button on the remote control unit. • Press the PLA Y button to resume normal playback. 3 Main unit Remote control unit (5) Playing Still Pictures (Pausing) B BAND PHONES VOLUME ON / STANDBY DVD SURROUND RECEIVER ADV-M71 TONE / SDB FUNCTION MENU/ SET + - SURROUND / SELECT [...]

43 ENGLISH 1 In the still mode, press one of the 6 / 7 buttons on the remote control unit. 6 : Reverse direction 7 : Forward direction • When pressed again, the slow play speed increases. (Four step) (Three step on video CDs) • Press the PLA Y button to resume normal playback. (9) Slow Playback (for DVDs and video CDs only) 7 6 Remote control u[...]

44 ENGLISH 3 Either turn the SURROUND/SELECT dial or press the SURROUND button on the remote control unit to select the surround mode. SURROUND / SELECT PUSH - PARAM. SURROUND Main unit Remote control unit • The function switches as shown below . • The function only changes in the “ Æ ” direction when operated from the remote control unit.[...]

45 ENGLISH B BAND PHONES VOLUME ON / STANDBY DVD SURROUND RECEIVER ADV-M71 TONE / SDB FUNCTION MENU/ SET + - SURROUND / SELECT PUSH - PARAM. VIRTUAL SPEAKER 2 1 3 STAT US RETURN SETUP TONE /SDB ENTER MUTING DISPLAY MENU TOP MENU SURROUND PARAMETER CH SELECT - + VCR CH 1 2 A / V 3 STAT US RETURN ANGLE AUDIO SUB TITLE SETUP TONE /SDB FUNCTION SURROUN[...]

46 ENGLISH Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater . Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolb[...]

47 ENGLISH 2 Sources recorded in Dolby Surround are indicated with the logo mark shown below . Dolby Surround support mark: Manufactured under license from Dolby Laboratories. “ Dolby ” , “ Pro Logic ” and the double-D symbol are trademarks of Dolby Laboratories. DTS Digital Surround Digital Theater Surround (also called simply DTS) is a mu[...]

48 ENGLISH Dolby Virtual Speaker Dolby Virtual Speaker technology uses proprietary technology of Dolby Laboratories to create a virtual surround sound field usi ng only two speakers for the front channels, allowing the user to experience sound as if surround speakers were actually being used. 2 Features of Dolby Virtual Speaker sound B Accurate sur[...]

49 ENGLISH (1) Playing in the Dolby Virtual Speaker mode • The Dolby Virtual Speaker mode is a mode using 3D sound technology from Dolby Laboratories to achieve multi-channel surround sound using only two speakers for the front channels. • With two speakers for the front channels, one of two modes can be selected: Reference or Wide. • The Dol[...]

50 ENGLISH Surround parameters (1) DOLBY VS (Dolby Virtual Speaker mode) • REF (Reference mode) This is the standard mode. • WIDE (Wide mode) This mode expands the front channel sound field. D.COMP . (Dynamic range compression) • This parameter adjusts the dynamic range of the Dolby Digital sound. When listening with the volume turned relativ[...]

51 ENGLISH [2] 2-channel mode settings • When 2-channel signals are input, one of two playback modes can be selected and set according to the 2-channel mode setting, Virtual 1 or Virtual 2. (The V irtual 1 mode is set by factory default.) Virtual 1 : 2-channel sources are played in virtual surround using Dolby Pro Logic II Cinema processing. Virt[...]

52 ENGLISH Surround parameters (2) 1. VIRTUAL1 (Virtual 1 mode) In this mode, 2-channel sources are played with Dolby Pro Logic II Cinema processing. This mode is suited for playing movie sources recorded in Dolby Surround and regular stereo sources. 2. VIRTUAL2 (Virtual 2 mode) In this mode, 2-channel sources are played with Dolby Pro Logic proces[...]

53 ENGLISH [1] DSP Surround simulation B BAND PHONES VOLUME ON / STANDBY DVD SURROUND RECEIVER ADV-M71 TONE / SDB FUNCTION MENU/ SET + - SURROUND / SELECT PUSH - PARAM. VIRTUAL SPEAKER 2,4,5 1 + - - RC-936 A / V 3 STAT US RETURN ANGLE AUDIO SUB TITLE SETUP TONE /SDB FUNCTION SURROUND INPUT MODE TEST TONE DVD TUNER CH 6 5 4 9 8 7 0 / 10 CALL ENTER M[...]

54 ENGLISH 5 • DEF AUL T setting YES NO ,/ When “ YES ” is selected, the settings are reset to their factory default values. Stop operating buttons once the surround parameter settings have been completed. After several seconds the normal display reappears and the settings are automatically set. Y / N Surround parameters (3) ROOM SIZE: • Th[...]

55 ENGLISH 2 T able of Surround Mode Parameters (1) Presence/absence of signals and controllability in the various modes Channel output FRONT L/R CENTER SURROUND L/R SUB-WOOFER Surround Mode DVS: Dolby Virtual Speaker DHP: Dolby Headphone REFERENCE WIDE DH1 DH2 DH3 BYP ASS STEREO DIRECT DOLBY DIGIT AL DTS SURROUND DOLBY PL II AUTO STEREO 5CH STEREO[...]

56 ENGLISH 2 T able of Surround Mode Parameters (3) Presence/absence of signals and controllability in the various modes Surround parameter – default value indicated in (parentheses) Pro Logic II Music mode only SDB TONE CONTROL 2ch DECODE MODE P ANORAMA DIMENSION CENTER WIDTH Surround Mode DVS: Dolby Virtual Speaker DHP: Dolby Headphone REFERENC[...]

57 ENGLISH (3) Playback using the Dolby Headphone mode • The ADV -M71 is equipped with the Dolby Headphone mode, a technology developed jointly by Dolby Laboratories and Lake T echnology for achieving 3D sound over regular headphones. • The Dolby Headphone mode is set when headphones are connected to the ADV -M71 ’ s headphones jack. • Ther[...]

58 ENGLISH Surround parameters (4) DOLBY H (Dolby Headphone modes) DH1 ..............Reference room (small room with little reverberation) DH2 ..............Live room (room with more reverberation than DH1) DH3 ..............Large room (Larger room than DH1. Use this mode to achieve a sense of distance and diffusion of the sound.) BYP ASS ........S[...]

59 ENGLISH Surround parameters (5) (2-channel mode) AUTO-ST (auto stereo) mode 2-channel sources are played in 2-channel stereo. When this mode is selected in the auto decode mode, multi-channel sources (DVD, BS digital, etc.) are played in the multi-channel mode, while 2-channel sources (CDs, etc.) are automatically played in stereo. PL II CINEMA [...]

ENGLISH 60 [3] Setting the parameters in the PL II Cinema, PL II Music and Pro Logic modes • When PL II Cinema, PL II Music or Pro Logic is selected for the 2-channel mode, detailed parameters can be set for each of these modes. PL II Music mode: Make the settings using the procedure below . • Program sources including the mark and CDs and othe[...]

ENGLISH 61 [4] Playing in the Dolby Pro Logic II mode (all functions) • The source is played according to the settings that have been made for the 2-channel mode and the parameters in the PL II Cinema, PL II Music and Pro Logic modes. • Applicable sources • Digital input signals (LINE-1 and D.AUX functions, including DVD playback discs) Dolby[...]

ENGLISH 62 15 LISTENING TO THE RADIO 1 Press the FUNCTION button and select “TUNER”. 2 Select “FM” or “AM”. • The selected “FM AUTO”, “FM MONO” or “AM” is displayed. • When using the remote control, the mode button is used to select FM AUTO and MONO. 3 Adjust the receiving frequency . • When a station is received, the [...]

ENGLISH 63 (2) Presetting stations that have been tuned in and giving names to stations (remote control unit only) 2 A total of 40 stations (including both FM and AM stations) can be preset. 2 Preset stations can be given names with up to 8 characters (letters, numbers and symbols). 2 Preset stations using the including remote control unit. 1 T une[...]

ENGLISH 64 (3) Auto tuner presets Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40. NOTE: • If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the statio n, then preset it using the manual “Preset memory” operation. B [...]

ENGLISH 65 • The ADV-M71 is equipped with an on-screen display (“OSD”) function that displays various types of information on the surround functions and the disc on the screen when the function is set to DVD. q Setup screen • This is used to select the speaker system being used (quick system setting) and to change the function of the ADV -M[...]

ENGLISH 66 17 USING THE ON-SCREEN DISPLA Y (1) Operating using the disc information OSD 1 2 3 In the play mode, press the DISPLA Y button. • The On-Screen Display appears. • The picture on the TV screen switches each time the button is pressed. • The items displayed differ from disc to disc. Example: For DVDs Use the and • , ª cursor butto[...]

ENGLISH 67 (2) Adjusting the picture quality • The quality of the picture when playing discs can be adjusted. 3 STAT US RETURN ANGLE AUDIO SUB TITLE SETUP TONE /SDB ENTER MUTING DISPLAY MENU TOP MENU SURROUND PARAMETER CH SELECT - + VCR CH 1 1,2,3 1,2 ENTER 1 When playing a disc with the function set to DVD, press the DISPLA Y button to turn on t[...]

ENGLISH 68 2 Use this function to play your favourite audio or video sections repeatedly . (3) Playing Repeatedly [1] Playing Repeatedly (Repeat Playback) + - + - A / V A-B REPEAT SEARCH MODE ON OFF REPEAT RANDOM CLEAR ZOOM SLIDE MODE PROG/ DIRECT MEMO BAND MODE FUNCTION SURROUND INPUT MODE TEST TONE DVD TUNER CH 3 - + 2 1 6 5 4 9 8 7 0 / 10 CALL +[...]

ENGLISH 69 [2] Playing a Certain Section Repeatedly (A-B Repeat Playback) 1 2 During playback, press the A-B REPEA T button. • This sets start point A. Press the A-B REPEA T button again. • This sets end point B, and repeat playback of the A-B section starts. T o return to normal playback: Press the A-B REPEA T button until “A TO B CANCELLED?[...]

ENGLISH 70 2 Use this function with video and music CDs to play the tracks in the desired order . 2 This function does not affect with DVD. (4) Playing T racks in the Desired Order 1 2 3 Press the PROG/DIRECT button once in the stop mode. • The program selection screen appears. Use the number buttons to select the number you want to program. • [...]

ENGLISH 71 2 Use this function with video and music CDs to play the tracks in random order . 2 This function does not affect with DVD. (5) Playing T racks in the Random Order 1 2 In the stop mode, press the RANDOM button. • The random play screen appears. Press the PLA Y ( 1 ) button. • The tracks start playing in random order . • Random play[...]

ENGLISH 72 [1] Listening to Recorded MP3 CD/CD-R/CD-RW 2 There are many music distribution sites on the internet from which music files in MP3 format can be downloaded. Music downloade d as instructed on the site and written onto a CD-R/RW disc can be played on the ADV -M71. If music recorded on commercially available music CDs is converted on a co[...]

ENGLISH 73 DVD 1 3 Use the • and ª cursor buttons to select the MP3 file you want to play , then press the PLA Y ( 1 ) button or ENTER button. • Playback starts. The display can be switched between the single elapsed time and the single remaining time by pressing the DISPLA Y button. Programmed playback is not possible with MP3 discs. T o chan[...]

ENGLISH 74 Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. NOTES: • Files recorded with a sampling frequency (fs) of 32, 44.1, and 48 kHz are supported. • Programmed playback cannot be performed with WMA files. • The digital output at the time o[...]

ENGLISH 75 2 JPEG files stored on Kodak picture CDs, CD-Rs and CD-RWs can be played as a slide show and enjoyed on the ADV -M71. [1] Playing Kodak picture CDs/FUJICOLOR CDs 2 Playing Picture CDs and Fujicolor CDs The ADV -M71 can play Kodak Picture CDs and Fuji Film Fujicolor CDs, so you can view the photographs stored on them on a TV scre en. (Pic[...]

ENGLISH 76 2 Use the • and ª cursor buttons to select the folder containing the file(s) you want to play , then press the ENTER button. T o change the folder Use the • cursor button to select “ROOT” at the upper right of the screen, then press the ENTER button. The screen in step 1 reappears. Select the desired folder . 3 Use the • and ?[...]

ENGLISH 77 Special play modes for MP3/WMA and JPEG files Use the 0 and 1 cursor buttons to select the play mode, the • and ª cursor buttons to select the special play mode. • FOLDER (the MP3/WMA and JPEG files in the folder are played in order starting from the selected file) • FOLDER REPEA T (all the MP3/WMA and JPEG files in the folder are[...]

ENGLISH 78 (8) Using the Multiple Audio, Subtitle and Angle Functions [1] Switching the Audio Language (Multiple Audio Function) 2 With DVDs containing multiple audio language signals, the audio language can be switched during playback. 1 2 During playback, press the AUDIO button. • The current audio language number is displayed. Use the • and [...]

ENGLISH 79 [2] Switching the Subtitle Language (Multiple Subtitle Function) 2 With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback. 1 2 During playback, press the SUBTITLE button. • The current subtitle language number is displayed. Use the • and ª cursor buttons to select the desired l[...]

ENGLISH 80 [3] Switching the Angle (Multiple Angle Function) 2 With DVDs containing multiple angle signals, the angle can be switched during playback. 1 2 During playback, press the ANGLE button. • The current angle number is displayed. Use the • and ª cursor buttons to select the desired angle. • The display turns off when the ANGLE button [...]

ENGLISH 81 (9) Using the Menus [1] Using the T op Menu 2 For DVDs containing multiple titles, the desired title can be selected and played from the top menu. 1 2 During playback, press the TOP MENU button. • The top menu appears. Use the cursor or number buttons to select the desired title. • If you select the title number using the number butt[...]

ENGLISH 82 [2] Using the DVD Menu 2 Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitl e language menus. These menus are called “ DVD menus ” . Here we describe the general procedure for using DVD menus. 1 2 During play[...]

ENGLISH 83 NOTES: • Zooming is not possible with some discs. • The zoom function may not work properly at some scenes. • Zooming is not possible at the top menu or the menu screen. In the play or pause mode, press the ZOOM button. • The zoom rate increases each time the ZOOM button is pressed. For DVD video discs and video CDs: OFF Æ x1.5 [...]

ENGLISH 84 (1) Setting the clock (12-hour display) 18 USING THE TIMER 1 T urn on the power . 2 Press the MENU/SET button to display “ Ti m e ” . MENU /SET Main unit • If the time has not yet been set or if there has been a power shortage, the time display flashes. • If the time has been set, the current time is displayed. 3 Press the MENU/S[...]

ENGLISH 85 Example 1: Listening to preset station “ 3 ” (FM 92.5 MHz) from p.m.12:35 to p.m.12:56 with the everyday timer B BAND PHONES VOLUME ON / STANDBY DVD SURROUND RECEIVER ADV-M71 TONE / SDB FUNCTION MENU/ SET + - SURROUND / SELECT PUSH - PARAM. VIRTUAL SPEAKER 1,18 2,3,4,6,8, 10,12,14,16 3,5,7,9,11, 13,15,17 (2) Setting the everyday time[...]

ENGLISH 86 10 Press the MENU/SET button. • The “ PM12 ” in the hours place is stored in the memory. MENU /SET Main unit E on P M12:00 11 T urn the SURROUND/SELECT knob and set the minutes place to “ 35 ” . E on P M12:35 SURROUND / SELECT PUSH - PARAM. 12 Press the MENU/SET button. • The start time is stored in the memory and the unit is[...]

ENGLISH 87 Example 2: Listening to a CD with the once timer B BAND PHONES VOLUME ON / STANDBY DVD SURROUND RECEIVER ADV-M71 TONE / SDB FUNCTION MENU/ SET + - SURROUND / SELECT PUSH - PARAM. VIRTUAL SPEAKER 1 3,4,5,7 4,6 2 2 1 T urn on the power . ON / STANDBY Main unit 4 T urn the SURROUND/SELECT knob to display “ ONCE ” , then press the MENU/S[...]

ENGLISH 88 (3) T urning the everyday timer and once timer on and off • After the timer has been set using the procedure described under “ (2) Setting the everyday timer and once timer ” (pages 85 to 86), turn the everyday timer and/or once timer on so that the set operations will be performed. B BAND PHONES VOLUME ON / STANDBY DVD SURROUND RE[...]

ENGLISH 89 • If the times set for the everyday timer and once timer overlap, the once time has priority . (4) Everyday timer and once timer priority 2 Checking the timer settings • Use the same procedure as when setting the timer to check the timer settings. q Press the MENU/SET button to display “ TIMER ” . w T urn the SURROUND/SELECT knob[...]

ENGLISH 90 • The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer ) • Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes). Example: T o set the power to the standby mode in 50 minutesaccording to the clock. Be[...]

ENGLISH 91 19 CHANGING THE DEF AUL T SETTINGS (DVD) Remote control unit Remote control unit ENTER 1 2 In the stop mode, press the SETUP button. At the Setup Menu, use the • and ª cursor buttons to select “ DVD SETUP ” and press the ENTER button. The setup (default settings) screen “ DVD SETUP MENU ” appears. • DISC SETUP Use this to se[...]

ENGLISH 92 Use the 0 and 1 cursor buttons to select the “ DISC SETUP ” , then press the ENTER button. • DIALOG Use this to set the language of the sound output from the speakers. • SUBTITLE Use this to set the language of the subtitles displayed on the TV . • DISC MENUS Use this to set the language of the menus recorded on the disc (top m[...]

ENGLISH 93 T o exit the dialog mode Press the ENTER button, you can go back to the previous screen. 2 When “SUBTITLE” is selected: • OFF (Factory default) Select this if you do not want to display the subtitles. (For some discs it is not possible to turn off the subtitle display .) • ENGLISH Select this when you want to play the DVD with th[...]

ENGLISH 94 Language code list Code 6565 6566 6570 6577 6582 6583 6588 6590 6665 6669 6671 6672 6678 6679 6682 6765 6779 6783 6789 6865 6869 6890 6976 6978 6979 6983 6984 6985 7065 7073 7074 Code 7079 7082 7089 7165 7168 7176 7178 7185 7265 7273 7282 7285 7289 7365 7378 7383 7384 7387 7465 7473 7487 7565 7575 7576 7577 7578 7579 7583 7585 7589 7665 [...]

ENGLISH 95 (2) When “OSD SETUP” is selected Use the 0 and 1 cursor buttons to select the “ OSD SETUP ” tag icon, then press the ENTER button. • W ALL P APER The image displayed when in the stop mode or when playing a CD can be selected. 1 If you are not at the DVD setting screen, read steps 1 and 2 on page 91. 2 3 4 Remote control unit Re[...]

ENGLISH 96 (3) “VIDEO SETUP” is selected Use the 0 and 1 cursor buttons to select the “ VIDEO SETUP ” , then press the ENTER button. • TV ASPECT Use this to set the shape of your TV ’ s screen. • TV TYPE Use this to set your TV ’ s video format (NTSC, P AL or MUL TI). • VIDEO MODE Use this to select the video mode. (AUTO, FILM, VI[...]

ENGLISH 97 2 When “TV TYPE” is selected: • NTSC (Factory default) Select this when your TV ’ s video format is NTSC. If NTSC is selected, output format is fixed to NTSC. • PA L Select this when your TV ’ s video format is P AL. If P AL is selected, output format is fixed to P AL. • MUL TI Select this when your TV is compatible with bo[...]

ENGLISH 98 (4) “AUDIO SETUP” is selected 3 Use the 0 and 1 cursor buttons to select the “ AUDIO SETUP ” , then press the ENTER button. • DIGIT AL OUT Use this to select the digital output ’ s signal format. • LPCM (44.1 kHz / 48 kHz) Use this to set the digital audio output when playing DVDs recorded in linear PCM audio. T o exit the [...]

ENGLISH 99 4 2 “LPCM SELECT (96 kHz / 48 kHz)” is selected. • OFF (Factory default) Make the selection when playing back to a decoder DVDs that were recorded with this unit using linear PCM 48 kHz/20/24 bit and 96 kHz modes. Note that DVDs with Copyright Protection are converted to 48 kHz/16 bits and played back. The same signal is output fro[...]

ENGLISH 100 (5) “RA TINGS” is selected 3 Use the 0 and 1 cursor buttons to select the “ RA TINGS ” , then press the ENTER button. • RA TING LEVEL Use this to restrict playback of adult DVDs you do not want children to view . Note that even with adult DVDs, viewing cannot be restricted unless the restriction level is recorded on the disc. [...]

ENGLISH 101 4 Use the number buttons to input a 4-digit password, then press the ENTER button. Be sure to set the DVD mode using the remote control mode selector buttons. The set's password is set to “ 0000" by default. Do not forget the password. The setting cannot be changed without inputting the correct password. 3 2 1 6 5 4 9 8 7 0 [...]

ENGLISH 102 (6) “OTHER SETUP” is selected 1 2 3 See page 91. Use the 0 and 1 cursor buttons to select the “ OTHER SETUP ” , then press the ENTER button. • CAPTIONS Set whether or not to display the closed captions (subtitles) recorded on the DVD. (A caption decoder (commercially available) is required to display captions.) • SLIDE SHOW [...]

ENGLISH 103 4 2 When “SLIDE SHOW” has been selected • Use the • and ª cursor buttons to set the time. • The interval can be set from 5 to 15 seconds in steps of 1 second. (Factory default: 5 seconds) Remote control unit Remote control unit ENTER d[...]

ENGLISH 104 2 Making system connections between the ADV -M71 and the D-M31 series cassette deck (DRR-M31) makes operation even easier . (For instructions on connections, refer to “ Connecting to D-M31 Series System Components ” on pages 8 to 9.) 2 System functions will not work properly if the input/output function settings are not right for th[...]

ENGLISH 105 (3) CD Æ Æ T APE recording (when the ADV -M71 and DRR-M31 are connected with a system cord) • CDs can easily be recorded onto cassette tapes. [2] Synchronized CD recording Perform the same operations as for steps 1 to 5 above. y Press the CD synchronized recording button on the cassette deck. • Recording of the CD starts automatic[...]

ENGLISH 106 (4) Edited recording (when the ADV -M71 and DRR-M31 are connected with a system cord) • The tracks on the CD can be automatically divided into sides A and B for recording according to the length of the cassette tape (tape time). (For CDs only) • Edited recording is possible for CDs containing up to 25 tracks. For CDs with 26 tracks [...]

ENGLISH 107 6 Press the play/pause button on the ADV -M71 or the DVD play button on the remote control unit. • Playback of the CD and recording onto the cassette tape start simultaneously . ADV -M71 01Tr 00:01 T o quit the edited recording function, press the ADV -M71 ’ s stop button. BAND 2 ADV -M71 Remote control unit NOTES: • The edited re[...]

ENGLISH 108 21 LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off. This function eliminates the need to perform complicated resettings when the power is switched on. • The unit is also equipped with a back-up memo[...]

ENGLISH 109 Check again before assuming the player is malfunctioning 2 Are all the connections correct ? 2 Are you following the instructions in the manual ? 2 Are the speakers and other components operating properly ? If this unit does not seem to be functioning properly , check the table below . If this does not solve the problem, this unit may b[...]

ENGLISH 11 0 Symptom Page Check DVD operation Playback does not start when PLA Y button is pressed. Playback stops immediately . — 6 7 • Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.) • Discs other than DVDs, video CDs and music CDs cannot be played. • Disc is dirty . Wipe off the dirt. Menu playback of video CD[...]

ENGLISH 111 24 SPECIFICA TIONS 2 Audio Section • Power Amplifier Section Rated output: Front: 20 W + 20 W (8 Ω /ohm load, 20 Hz to 20 kHz, T .H.D. 0.08%) Practical maximum output: Front: 35 W + 35 W (6 Ω /ohm load, 1 kHz) *(EIAJ) Output terminals: Speaker impedance: 6 to 16 Ω /ohms • Analog Section Input sensitivity/Input impedance: 200 m[...]

Printed in China 511 4048 005 16-11, YUSHIMA 3-CHOME, BUNKYO-KU, TOKYO 113-0034, JAP AN T elephone: (03) 3837-5321[...]