Dell P2011Ht инструкция обслуживания

Dell™P2011HMonitorUser'sGuide Notes, Notices, and Cautions     Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks use[...]

Back to Contents Page  About Your Monitor Dell™P2011HMonitorUser'sGuide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing. Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and[...]

 Product Features The Dell™ Professional P2011H flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: ■ 50.80cm(20inches)viewableareadisplay(Measureddiagonally). 1600 X 900 resolution, plus full - screen support[...]

Back View  Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power button (with power light indicator) Back view Back view with monitor stand Label Description Use 1 VESA mounting holes (100 mm x 100 mm - behind attached VESA Pla[...]

Side View Bottom View  8 Cable management slot Use to organize cables by placing them through the slot.  Leftview   Right view Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cable 2 DC power connector for Dell Soundbar. Connect the power cord for the soundbar (optional)[...]

*[P2011H] color gamut (typical) is based on CIE1976 (79 % ) and CIE1931 (68%) test standards. Screen dimensions 50.8 cm (20 - inch viewable image size) Preset display area: 462.8 (H) x 2 72. 0 (V) mm Horizontal 462.8 mm (18.22 inches) Vertical 2 72. 0 mm (10.71 inches) Pixel pitch 0.277 mm Viewing angle 160°(vertical)typ,170°(horizont[...]

Video Supported Modes Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56Hzto75Hz(automatic) M aximum resolution 1600 X 900 at 60 Hz Model P2011H Video display capabilities (DVI playback) 480p, 576p, 720p, 1080p and 1080i Preset Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel [...]

Electrical Specifications Model P2011H Video input signals Analog RGB, 0.7 Volts +/ - 5%, positive polarity at 75 ohm input impedance Digital DVI - D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance Synchronization input signals Separate horizontal and vertical synchronizations, polarity - free TTL level, SOG (Com[...]

(For wall mount or VESA mount considerations - no cables) 2.70 kg (5.94 lb) Weight of stand assembly 1.70 kg (3.74 lb) Environmental Characteristics Model P2011H Temperature Operating 0°to40°C Non - operating Storage: - 20°to60°C( - 4°to140°F) Shipping: - 20°to60°C( - 4°to140°F) Humidity Operat[...]

 Non - operating Storage: 5% to 90% (non - condensing) Shipping: 5% to 90% (non - condensing) Altitude Operating 4,850 m (15,902 ft) max Non - operating 12,192 m (40,000 ft) max Thermal dissipation 153.65 BTU/hour (maximum) 85.36 BTU/hour (typical) Power Management Modes IfyouhaveVESA'sDPM™compliancedisplaycardor?[...]

Back to Contents Page  Appendix Dell™P2011HMonitorUser'sGuide  Safety Instructions  FCC Notice (U.S. Only) and Other Regulatory Information  Contacting Dell  WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide . FCC Notices (U.S. Only) and Other Regulatory Informat[...]

Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps: - Back to Contents Page 1.CheckOperatingSystemRequirements Windows XP, Windows Vista ® , Windows ® 7 2. Install Entech API Install 3.InstallPowerNapSoftware Install[...]

Back to Contents Page Setting Up Your Monitor Dell™P2011HMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard. 2. After installing th[...]

Back to Contents Page Setting Up Your Monitor Dell™P2011HMonitor IfyouhavenonDell™desktop,portablecomputer,orgraphiccard In Windows XP: 1. Right - click on the desktop and click Properties . 2. Select the Settings tab. 3. Select Advanced . 4. Identify your graphics controller supplier from the description [...]

Back to Contents Page  Operating the Monitor Dell™P2011HMonitorUser'sGuide  Using the Front Panel Controls  Using the On - Screen Display (OSD) Menu  PowerNap Software  Setting the Maximum Resolution  Using the Dell Soundbar (Optional)  Using the Tilt, Swivel, and Vertical Extension  R[...]

Using the On - Screen Display (OSD) Menu   Accessing the Menu System Main Menu for Analog (VGA) Input or Main Menu for Digital (DVI - D) Input  5 Power (withpowerlight indicator) Use the Power button to turn the monitor on and off. The Blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power [...]

Brightness / Contrast Use t his menu to activate Brightness/Contrast adjustment.   Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the button to decrease brightness (min 0 ~ max 100).  NOTE: Brightness control will be greyed out during "Screen dim" in PowerNap option[...]

[...]

[...]

[...]

[...]

[...]

  AUTO ADJUST Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. Auto Adjustment allows the monitor to self - adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock an[...]

INPUT SOURCE Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.    Auto S elect Select Auto Select to scan for available input signals. VGA Select VGA input when you are using the analog (VGA) connector. Press to select the VGA input source. DVI - D Select DVI - D input when you ar[...]

When you select Video , you can choose Movie, Game, Sports, or Nature : l Movie : Loads color settings ideal for movies. This is the default preset mode. l Game : Loads color settings ideal for games. l Sports : Loads color settings ideal for sports. l Nature : Loads color settings ideal for nature.   Hue This feature can shift color of video[...]

 Display Setting submenu for DVI - D input   Wide Mode Adjust the image ratio as 4:3 or full screen.  Horizontal Position Use the and buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+). NOTE: WhenusingaDVIsource,theHorizontalPositionsettingisnotav[...]

[...]

Back to Contents Page Setting Up Your Monitor Dell™P2011HMonitor Setting the display resolution to 1600 X 900 (maximum) For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1600 X 900 pixels by performing the following steps: In Windows XP: 1. Right - click on the desktop and [...]

Dell™P2011HMonitor Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logoaretrademarksof[...]

Back to Contents Page  Setting Up the Monitor Dell™P2011HMonitorUser'sGuide  Attaching the Stand  Connecting the Monitor  Organizing the Cables  Attaching the Soundbar (Optional)  Removing the Stand   Wall Mounting (Optional)  Attaching the Stand To attach the monitor stand: 1. Remove [...]

Connecting the Blue VGA Cable  Connecting the USB cable After you have completed connecting the DVI/VGA /DP cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: 1. Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer. (See bottom view for details.) 2. Co[...]

After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot toorganizeallcablesasshownabove. Attaching the Soundbar (Optional) Removing the Stand To remove the stand: To remove the stand: 1. Place the monitor on a flat surface. 2. P ress and h[...]

(Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA - compatible base mounting kit. 1. Place the monitor panel on a soft cloth or cushion on stable flat table. 2. Remove the stand 3. Use a screwdriver to remove the four screws securing the plastic cover. 4. Attach the mounting bracket from the wall mounting kit to the L[...]

Back to Contents Page  Troubleshooting Dell™P2011HMonitorUser'sGuide  Troubleshooting Your Monitor  Built - in Diagnostics  Common Problems  Product Specific Problems  Universal Serial Bus Specific Problems  Dell Soundbar Problems  Troubleshooting Your Monitor Self - Test Feature Check[...]

To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds. A gray screen app[...]

Product Specific Problems Universal Serial Bus (USB) Specific Problems Horizontal/Vertical Lines Screen has one or more lines l Reset the monitor to Factory Settings. l Perform Auto Adjust via OSD. l Adjust Phase and Pixel Clock controls via OSD. l Perform monitor self - test feature check and determine if these lines are also in self - test mode. [...]

Dell™Soundbar Problems Back to Contents Page Common Symptoms What You Experience Possible Solutions No Sound No power to Soundbar - the power indicator is off l Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the power indicator (Blue LED) on the front of the Soundbar is illuminated. l Confirm that the pow[...]