Definitive Technology Six инструкция обслуживания

Congratulations Congratulations on your purchase of a Definitive T echnology Mythos Audio/V ideo Loudspeaker System. These superb loudspeakers utilize state-of-the-art components ( homopolymer - coned bass-midrange drivers, moving coil ferrofluid- cooled pure aluminum dome high frequency radiators, long excur s i o n p r e s s u r e coupled woofe[...]

Y our new Mythos speakers are very flexible in terms of positioning and placement options. The Mythos Six will generally be positioned vertically . It can be easily mounted on a wall using its unique mounting system. When attached to its optional glass base, it can be placed on a tabletop, on a bookshelf or in a cabinet, etc. The Mythos Seven is d[...]

Positioning Mythos Six as Rear/Side Surrounds When used as rear or side surround speakers, Mythos Six may be located on the side or behind the listeners. When used on the sides, take care never to locate the speakers forward of the listeners. The speakers may be placed at or above ear level. If the speakers are placed on the rear wall, it is sugges[...]

Hooking Up Y our Mythos Loudspeakers Y our Mythos loudspeakers each have one pair of gold 5-way binding posts. Normally , you will hook up the left main/front channel red(+) terminal of your receiver or amplifier to the red(+) terminal of your left Mythos loudspeaker and the left main/front channel black(-) terminal of your receiver or amplifier [...]

5 Mounting Y our Mythos Six with the Supplied W all-Mount Bracket Y our Mythos Six comes with an optional wall-bracket designed to securely mount your speaker flush to your wall. The bracket can ONL Y be used with a vertical installation. (For horizontal installations, the Mythos Seven speaker should be used instead.) For safety , it is extremely [...]

the center of the Mythos Six speaker terminals will be 3 1 / 4 inches (82 mm) below the bottom edge of the bracket. T o install the Mythos Six on its bracket, securely fasten the two mount- ing screws supplied into the two threaded holes on the rear of the speaker , screwing them in as far as they will go. The speaker will then hang in the two “k[...]

7 (or any other solid object), please allow an extra 1 inch (35mm) for the speaker to slide onto its bracket. If your speaker wires are to be hidden inside the wall, be sure to conform to your local building codes. When installed on the bracket, the Mythos Seven speaker terminals will be even with the right edge of the bracket. T o install the Myth[...]

If you use a subwoofer, we strongly suggest using a Definitive PowerField SuperCube, PowerField or ProSub in order to achieve the highest level of sound quality possible. With Dolby Digital Receivers and Decoders Most systems using the Mythos loudspeakers with a subwoofer will be Dolby Digital Systems. Simply hook the Mythos speakers up to the lef[...]

simply hook them up as normal to the rear or side channel amplifier out- puts of your system. Set the bass management system of your decoder to “Small ” rear and/or side surrounds if your system is using a separate subwoofer , or “Lar ge ” rear or side surrounds if your system is not using a separate subwoofer . It is our pleasure to offer[...]

VERY IMPORTANT: SETTING CHANNEL BALANCE AND BASS MANAGEMENT SYSTEMS Dolby Digital and Dolby ProLogic systems and decoders have a critical channel balancing procedure for the left and right front speakers, center channel, rears and subwoofer (if it is hooked up through the LFE or Sub Out low level connection) which must be followed if the system is [...]

This product complies with the essential requirements of EMC directives 89/336/EEC and 73/23/EEC (inclusive of 93/68/EEC) and carries the CE mark accordingly . CRAT012809 Definitive Technology warrants to the original retail purchaser only that this Definitive Technology Loudspeaker Product (the “Product”) will be free from defects in materia[...]