Daewoo DTQ 27U4SC инструкция обслуживания

INSTRUCTION MANUAL Color T elevision DTQ 20U4SC DTQ 27U4SC[...]

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerou[...]

Important Safeguards SAFETY IMPORT ANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 2 Save these instructions for later use. 3 Unplug this television equipment from the wall outlet b[...]

Important Safeguards 13 An outside antenna system should not be locat- ed in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact wi[...]

Daewoo Electronics America Inc. 120 Chubb Avenue, Lyndhurst, NJ 07071 Dear Customer : Daewoo Electronics America Inc. would like to thank you for choosing this color television receiver. It incorporates a host of features designed to give you excellent performance for many years to come. We realize that you’re eager to turn it on and begin enjoyi[...]

CONTENTS 1 Table of Contents T able of Contents Chapter 1: Overview of Your Equipment 2 Your TV's Front Panel 2 Your TV's Back Panel 3 Your Remote Control 4 Installing your remote control batteries 5 Notes 5 Chapter 2: Connecting an Antenna or Cable to Your TV 6 Connecting an Antenna 6 Connecting a Cable System 7 Connecting Other Pieces o[...]

Overview of Y our Equipment Your TV comes with a remote control. The section below summarizes the buttons, controls, and ter- minals that you will use with your TV. Your TV's Front Panel 1 POWER Use this button to turn your TV on or off. 2 VIDEO IN jack Use this jack to receive a video signal from another A/V component. 3 AUDIO IN jack Use thi[...]

Your TV's Back Panel 1 Antenna terminal(ANT) Use this terminal to attach an antenna or cable system to your TV. 2 VIDEO IN These terminals allow the TV to receive video signals from another A/V components. * S-VIDEO jack is used to receive the separated video signal, such as Y/C signals from the S-VHS VCR. 3 AUDIO IN This terminal allows the T[...]

4 Chapter 1 : Overview of Your Equipment Your Remote Control 1. POWER Use this button to turn your TV on or off. 2. MUTE Use to turn the TV’s sound on and off. 3. W CH V Use these buttons to change channels on your TV, or select items in the menu system. 4. C VOL B Use these buttons to change your TV's volume, to activate selections in the m[...]

5 Chapter 1 : Overview of Your Equipment Installing your remote control batteries 1 Open the battery compartment on the back of the remote control. 2 Install two AA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. Notes Do not mix different types of batteries together o[...]

6 CHAPTER 2 Chapter 2 : Connecting an Antenna or Cable to Your TV Connecting an Antenna or Cable to Y our TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown [...]

7 Chapter 2 : Connecting an Antenna or Cable to Your TV Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads , you must obtain a combin- er (available at your[...]

8 Chapter 2 : Connecting an Antenna or Cable to Your TV If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the con- verter box and the antenna terminal on the TV. You will need to keep your TV tuned to channe[...]

Operating Y our TV Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batter- ies in the remote, you are ready to use the TV. The first thing you should do is to program your TV so it memorizes all of available channels. Turning Your TV On 1 To turn your TV on, press the POWER button on the remote control. You[...]

Changing Channels You can change channels in three ways: 1 The W CH V buttons will take you through all memorized channels, one by one. The W CH V buttons will not access channels that have not been programmed into the TV's memory. For more information about programming channels into memory, see the section “Programming your TV's Channe[...]

11 Chapter 3: Operating Your TV Changing the TV's Channel Memory Your TV's memory determines the channels that are available using the W CH V buttons. You can add channels to this memory or remove them from memory. If a channel is removed from memory, you can tune to it with the number buttons, but you cannot tune to it with the W CH V bu[...]

Changing the TV's Input Normally, your TV displays the signal coming through the antenna terminal. However, i f you’ve connected another component to your TV(such as a VCR & DVD) using the Video/Audio input, you will want to be able to view the signal from the component. To do this, you will need to switch from the ‘ TV ’ input to th[...]

13 Chapter 3: Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing pic- ture. To do so, follow these directions: 1 With the TV on, press the MENU button. then “Video” menu will appear. 2 The “Settings” item will be selected. Use the C VOL B buttons to turn[...]

14 Chapter 3: Operating Your TV Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, fol- low these steps : 1 With the TV on, press the MENU button. then “Video” menu will appear. 2 Press the C VOL B buttons to set the “Settings” to ‘Preset’. The TV will re[...]

15 Chapter 4: Using Timer Functions Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Setting the Clock 1 With the TV turned on, press the MENU button until “Time” menu will be displayed. 2 The[...]

16 Chapter 4: Using Timer Functions Setting the Off Time If you enter a time in the “Off Time” setting, your TV will automatically turn off at that time. Follow these instructions to set the “Off Time”. 1 With the TV turned on, press the MENU button until “Time” menu will be displayed. 2 Use the W CH V buttons to select “Off time” i[...]

17 Chapter 4: Using Timer Functions Setting the Sleep Timer The sleep timer allows you to set an amount of time from 15 minutes to 120 minutes. TV will count down the amount of time you set, then turn itself off. To set the sleep timer: 1 With the TV turned on, press the MENU button until “Time” menu will be displayed. 2 Use the W CH V buttons [...]

18 Chapter 5 : Additional Features Using the Special Features This section contains descriptions of the more advanced features of your TV. Changing the Language of the On-screen Menus You can choose to display the on-screen menus in English, Spanish, French. To change the on-screen language: 1 With the TV on, press the MENU button twice, then “Se[...]

19 Chapter 5 : Additional Features CC on Mute With this function, user can select the caption display instead of sound mute when using the Mute button by necessity. This function is only effective when the Closed Caption is set to Off. 1 With the TV turned on, press the MENU button until “Special” menu will be displayed. 2 Use the W CH V button[...]

20 Chapter 5 : Additional Features Parental Control Settings This item helps parents to set the standard for the programs which their children is going to watch. 1 With the TV on, press the MENU button until “Special” menu will appear. 2 Use the W CH V buttons to select “Parental Control” item. 3 Use the C VOL B buttons to enter into “Par[...]

21 Chapter 5 : Additional Features Description of Parental Control Settings 1 The TV Guidelines set the standard for TV programs excluding sports and news. Use the W CH V buttons to select, C VOL B buttons to adjust. You can set individual settings with C VOL B buttons. 2 The Movie Ratings set the standard for movie, video, and other media excludin[...]

22 Chapter 5 : Additional Features No Ratings means 1 When V-chip data is error. 2 When any ratings are not deleted. 3 Received a rating of “None” like news, sports, and emergency broadcast signals. Mini Glossary MOVIE RATING SYSTEM TV PARENTAL GUIDELINE RATING SYSTEM X Hard Core Films Not for children under age 17 under any circumstance. Stron[...]

23 Chapter 5 : Additional Features Ch Labels This feature allows you to enter a 4 letter channel identifier of your choice that will appear over the channel number display. The labeling can be anything you want. 1 With the TV turned on, press the MENU button until “Special” menu will be displayed. 2 Use the W CH V buttons to select “Ch Labels[...]

24 Chapter 5 : Additional Features NOTE Each time you press the W CH V buttons, the displayed character will change in the following order. CH V A B C D ... Z 0 1 ... 9 - W CH 9 8 ... 0 Z Y ... B A - Clearing Channel Labels 1. Select the channel which has the label you want to clear. 2. 3.4. Follow step 1~3 on the “Ch Labels” to call up the Ch [...]

25 Chapter 6 : Adjusting the Sound CHAPTER 6 Adjusting the Sound Selecting stereo/SAP The MTS(Multi-channel TV Sound) provides for an extra sound channel. So MTS feature allows you to improve your TV viewing with high fidelity stereo sound. SAP(Second Audio Program) used to transmit a second language of other audio information. If your TV receives [...]

26 Chapter 6 : Adjusting the Sound Using Direct button on the remote control 1 You can also change the Audio Mode setting with the remote control. Press the MTS button on the remote control to select Audio Mode. 2 Use this button to select the Stereo, Mono or SAP. Adjusting the Bass 1 With the TV turned on, press the MENU button until “Audio” m[...]

27 Chapter 6 : Adjusting the Sound Adjusting the Treble 1 With the TV turned on, press the MENU button until “Audio” menu will be displayed. 2 Use the W CH V buttons to select “Treble” item. 3 Press the C VOL button to decrease the treble volume. 4 Press the VOL B button to increase the treble volume. 5 To return to normal TV viewing, press[...]

28 Selecting the Surround Effect Mode 1 With the TV turned on, press the MENU button until “Audio” menu will be displayed. 2 Use the W CH V buttons to select “Surround Effect” item. 3 Press the C VOL B button to select the surround effect mode from S1 to S3 for the favourite sound. 4 To return to normal TV viewing, press DISPLAY button or M[...]

29 Chapter 7 : Troubleshooting T roubleshooting Your Daewoo television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below. If the suggestions listed below do not solve your problem, contact your Daewoo dealer or an autho- rized Daewoo service center. There is no pictur[...]