Daewoo DTQ 27S2FCV, DTQ 25S2FCV инструкция обслуживания

Color T elevision INSTRUCTION MANUAL DTQ 25S2FCV DTQ 27S2FCV[...]

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user t[...]

Daewoo Electronics Corporation of America 120 Chubb Avenue, Lyndhurst, NJ 07071 1-800-DAEWOO8 (1-800-323-9668) Fax:201-935-5284 Dear Customer : Daewoo Electronics Corporation of America would like to thank you for choosing this color television receiver. It incorporates a host of features designed to give you excellent perfor- mance for many years [...]

T able of Contents Important Safeguards 2 Chapter 1: Overview of Your Equipment 4 Your TV's Front Panel 4 Your TV's Back Panel 4 Your Remote Control 5 Installing your remote control batteries 6 Notes 6 Chapter 2: Connecting an Antenna or Cable to Your TV 7 Connecting an Antenna 7 Connecting a Cable System 8 Connecting Other Pieces of Equi[...]

important safeguards SAFETY 2 IMPORT ANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIP- MENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 2 Save these instructions for later use. 3 Unplug this television equipment from the wall outl[...]

13 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. [...]

Your TV comes with a remote control. The section below summarizes the buttons, con- trols, and terminals that you will use with your TV. Y our TV's Front Panel 1 POWER Use this button to turn your TV on or off. 2 V CH W Use these buttons to change channels on your TV, or to select items in the menu system. 3 C VOL B Use these buttons to change[...]

1 POWER Use this button to turn your TV on or off. 2 V CH W Use these buttons to change channels on your TV, or select items in the menu system. 3 C VOL B Use these buttons to change your TV's volume, to activate selections in the menu system, or to change audio and video settings. 4 MENU Use this button to turn the TV's menu system on an[...]

Installing your remote control batteries 1 Open the battery compartment on the back of the remote control. 2 Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. Notes Do not mix different types of batteries, or mix an old and a new battery. Remove and repla[...]

Chapter 2 : Connecting an Antenna or Cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown below, not all of them. All connections will be made to[...]

Chapter 2 : Connecting an Antenna or Cable to Your TV 8 Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads , you must obtain a combiner (available at your l[...]

Chapter 2 : Connecting an Antenna or Cable to Your TV If your cable system requires you to use a converter box for all channels , connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3[...]

Chapter 3 : Operating Your TV Operating Y our TV CHAPTER 3 10 Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the remote, you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of the available channels. T urning Y our TV On 1 To turn your TV on, press[...]

Chapter 3 : Operating Your TV 11 Changing Channels You can change channels in three ways: 1 The V CH W buttons will take you through all memorized chan- nels, one by one. The V CH W buttons will not access channels that have not been programmed into the TV's memory. For more information about programming channels into memory, see the section ?[...]

12 Erasing a channel from memory 1 Tune to the channel you want to erase. 2 Press the ADD/ERA button on the remote control. The channel will turn from green to magenta to show it has been erased. Changing the TV's channel memory with the menus You can also use the menu system to add or erase channels from memory: 1 Use the number buttons to tu[...]

Changing the TV’ s Input Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve connected another component to your TV (such as a VCR) using the Audio/Video Inputs, you will want to be able to view the signal from that component. To do this, you will need to switch from the “TV” input to the “Video?[...]

Chapter 3 : Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1 With the TV on, press the MENU button. 2 Use the V CH W buttons to select PICTURE. 3 Press the C VOL B buttons. The picture menu will appear. 4 The AUTO [...]

Chapter 3 : Operating Your TV Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps : 1 Complete steps 1-3 in the “Adjusting Video Settings” section, on the previous page. 2 Press the C VOL B buttons to set the AUTO setting to ON. This will return[...]

CHAPTER 4 16 Chapter 4 : Setting the Sound Setting the Sound Your TV set is capable of decoding a STEREO signal. Changing The Sound Mode 1 With TV turned on, press the MENU button. 2 Use the V CH W buttons to select sound. 3 Press the C VOL B buttons. The SOUND menu will be displayed. 4 Use the V CH W buttons to change the STEREO or MONO setting. 5[...]

CHAPTER 5 Using Timer Functions 17 Chapter 5 : Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Accessing the Timer Menu 1 With the TV turned on, press the MENU button. 2 Use the V CH W buttons to[...]

Settings the On Timer If you enter a time in the ON TIME setting, your TV will automatically turn on at that time. Follow these instructions to set the ON TIME: 1 Follow steps 1-3 in “Accessing the Timer Menu” on the previous page. 2 Use the V CH W buttons to select ON TIME. 3 Press the C VOL button to set the hours (including AM/PM); press the[...]

3 Press the C VOL button to set the hours (including AM/PM); press the VOL B but- ton to set the minutes. If you hold down either VOL button, the corresponding num- bers will change more quickly. 4 When the setting is correct, use the V CH W buttons to select another timer function, or use the MENU button to exit this menu. Canceling the On Timer o[...]

This section contains descriptions of the more advanced features of your TV. Changing the Language of the On-screen Menus You can choose to display the on-screen menus in English, Spanish, or French. To change the on-screen language: 1 With the TV turned on, press the MENU button. 2 Use the V CH W buttons to select SETUP and press VOL+. 3 Use the V[...]

5 Wait 5 seconds, or press the MENU button twice to return to normal TV viewing. Your setting will remain intact until you change it. About captions Once you have chosen a caption setting, all available captions on that setting will be dis- played when you watch TV. If no captions appear, it is because there are no captions being broadcast for that[...]

Parental Control Settings This function helps parents to set the standard for the programs that their chidren are able to watch. The Rating Codes for TV program or video movie is provide by the sup- plier. These codes describe suitability for childern. Parents can make the television to be blocked with unsuitable programs or movies for their childr[...]

23 Chapter 6 : Additional Features 5 PARENTAL LOCK : Toggle ON or OFF using C VOL B buttons. 6 TV GUIDELINES : Set the standard for TV programs except Sports and News. Use V CH W buttons to select an item. Selected item marked by red-box. Press C VOL B buttons to adjust. Blocked item marked by “ ✓ ” symbol. 7 MOVIE RATINGS : Set the standard [...]

24 Chapter 6 : Additional Features[...]

25 TV GUIDELINES and MOVIE RA TINGS 1. TV GUIDE LINES TV-MA : Mature audiences only This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17. This program contains one or more of the following: graphic violence (V), explicit sexual activity (S), or crude indecent language (L). TV-14 : Childr[...]

26 Chapter 6 : Additional Features FV : Fantasy Violence V : Violence S : Sexual Situations L : Adult Language D : Sexually Suggestive Dialogue 2. MOVIE RATINGS X : Adult Movie NC-17 : No One 17 and Under Admitted R : Restricted Under 17 requires accompanying parent or adult guardian. PG-13 : Parents Strongly Cautioned Some material may inappropria[...]

27 Your Daewoo television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below. If the suggestions listed below do not solve your problem, contact your Daewoo dealer or an authorized Daewoo service center. There is no picture or sound, or the TV doesn't turn on. •[...]

28 W ARRANTY Warranty W arranty Daewoo Electronics Corporation of America warrants each new electron- ic product manufactured by it to be free from defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the Company ’ s option) in exchange for any part of any unit of its manufacture which under nor- ma[...]

Daewoo Electronics Corporation of America 120 Chubb Avenue Lyndhurst, NJ 07071 For more information about this or other Daewoo products, please call 1-800-DAEWOO8. This instrument is listed by Underwriter ’ s Laboratories, Inc. It is designed and manufactured to meet rigid U.L. safety standards against X-radiation, fire, casualty and electrical h[...]