Curtis LCD1105A инструкция обслуживания

LCD Color digital TV receiver LCD1105A Operation Instruction NOTE: THIS UNIT IS NOT MEANT TO BE USED IN A MOVING VEHICLE. ATSC DIGIT AL TUNERS DOES NOT RECEIVE SIGNAL WHEN IN MOTION. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) t[...]

Contents I Precautions II Accessories III Appearance IV Description of Panel Buttons V Remote Controller Directions VI Basic Operation VII TV Menu Operation 6.1. TV/AV Image Quality Adjustment 6.2. Sound Adjustment 6.3. Time Adjustment 6.4. Settings 6.5. Program Searching VIII To Receive Clear Images IX Before Repair X Technical Parameter XI Stand [...]

I Precautions 1. Keep this product away from extremely hot or cold places. The storage temperature ranges from -40 to 60 and the working temperature from -5 to 40 . 2. Do not use this product at damp environment like bathtubs, wash basins, kitchens, washtubs, as well as basements, swimming pools or similar places. 3. Do not expose your TV set to hi[...]

* Open the package and make sure all the items are included. II Accessories 1. Car adapter 2. AC adapter 3. A V conversion cable 4. Remote control 5. AAA type batteries 6. T elescopic antenna 7. 75 ohm antenna conversion cable(screw connector) 8. User manual -2-[...]

III Appearance -3- 1. Loudspeaker 2. TFT-LCD Screen 3. Control Panel 4. Remote-control receive window 5. Power indicator Red: Standby Green: Power-on 6. Power: power on/off 7. Antenna Input Jack 8. A V2 IN Input 9. AV1 IN Input 10. Earphone Jack 11. 12V DC Power Jack[...]

IV Description of Panel Buttons 1. MENU: Menu button, press to show the main menu. When system enters a multilevel submenu, press to return the previous menu step by step. 2. CH+ : Upward selection/Channel increasing. 3. CH- : Downward selection/Channel decreasing. 4. VOL+ : Rightward selection/For volume increasing. 5. VOL- : Leftward selection/Fo[...]

V Remote Controller Operation Instruction -5- 1 2 4 8 9 11 12 13 14 15 16 17 18 3 10 AAA AAA 1. CH+/CH- (Program choosing key, up and down direction key): Press CH+ key to increase the channel by degree. Press this key and choose menu upward if it is in the system menu. Press CH- key to decrease the channel by degree. Press this key and choose menu[...]

-6- 9. MENU: Menu key. When you press this key , the main menu will display. When the system enters a multilevel submenu, press this key and return to previous menu step by step. 10. PRLIST : TV program menu key. When pres sing this key, you will see the entire program list in a program list box. 11. POWER (Power Switching Key): When you press this[...]

VI Basic Operation 2. Connection Of External Antenna: Align one end of the attached external antenna cord plug with the external antenna jack, and the other end to connect the external antenna head. AV transforming wire 1. Connection of Power Supply: Align the power supply plug on AC adapter with the jack on the machine rear cover marked with DC. -[...]

VII TV Menu Operation -8- 1. There are four options of picture mode, which are Personal, Standard, Dynamic and Soft. 2. Contrast: Adjust the black and white contrast of the image 3. Brightness: Adjust the brightness of the image 4. Color: Adjust the color of the image 5. Sharpness: Adjust the sharpness of the image 6. Tint: Adjust the red and green[...]

1. There are four options of sound mode, which are Personal, Standard, Movie and Music. 2. Bass: Adjust bourdon. 3. Treble: Adjust alt. 4. Balance adjust the balance between left and right sound track. 5. Audio Language can be setup as English, and Spanish. French Press MENU key to enter the menu list and then press left or right key to enter the a[...]

7.4.1. OSD Language Settings Press Up and Down Key to choose Language, and press Left and Right Key to choose among English, French and Spanish. 7.4.2. Menu State Settings Press UP and Down Key to choose Transparency , and press Left and Right Key to choose Off (menu transparency off) or On (menu transparency on). 7.4.3. Color Auto-adjustment Press[...]

-11- 7.4.5. Closed Caption Settings Many TV programs contain closed caption information, and the audience can see the caption in words on the screen. Not all the channels at any time have closed caption code information. Press Up and Down Key to choose Closed Caption and press Left and Right Key to enter the following picture. There are three CC Mo[...]

UP/DOWN ADJUST "MENU": EXIT AUTO Cable System Start to Scan UP/DOWN ADJUST "MENU": EXIT Antenna CA TV Auto Scan Channel No. Channel Lable UP/DOWN ADJUST "MENU": EXIT Auto Scan Channel Lable Antenna Air Channel No. 4-1 7.5. Program Searching Press MENU Key to enter the menu list, press Left and Right Key to enter the fo[...]

UP/DOWN ADJUST "MENU": EXIT AUTO Cable System Start to Scan 7.5.2. In the Start to scan item, press VOL+ to start searching. Auto searching will clear the primary program. 7.5.4. Show/Hide settings Choose Show/Hide and press Up and Down key to choose program then press Left and Right dey to setup Show or Hide the program -13- UP/DOWN ADJU[...]

UP/DOWN ADJUST "MENU": EXIT Press VOL+ or VOL- to change current channel number. 7.5.6. Change or Edit Program Name Choose Channel Label and press VOL+ to enter the following picture. Press UP and Down key to alter the characters and numbers in the box to change the program name according to your preference as in the following picture. 7.[...]

VIII T o Receive Clear Image Adjust the length, angle and direction of the telescopic antenna to receive the optimal image. Draw back the antenna beginning from the wide part after using. Warning If the signals are too weak, no matter how to adjust the antenna, the image will not be clear and there are phenomenons like high noise, shaking, and soun[...]

IX Before Repair The following phenomenons do not mean that the TV set has fault. Please check it according to the following methods before repair. Phenomenon Reason No image and sound AC adapter or automobile adapter connecting improperly; using unauthorized power; the power switch is on the state of off. No signal Whether chosen the right channel[...]

Input ATSC frequency: 54MHz 803MHz NTSC receiving frequency: 55.25MHz 801.25MHz LCD Screen Technical Parameter LCD screen: 11 inch LCD screen scale: 16:9 Resolution: 800(H) RGB 480(V) Response Rate: R: 30/F: 50 Visible Angle: U: 55/D: 65 L/R: 65 Illuminant: CCFL Lamp Life: >10,000 Hours Capability Parameter Power Supply: AC INPUT 100-240V 50/60H[...]

XI Stand Assemble Instruction Manual -18- Pict.-9 Pict.-10 Pict.-11 Pict.-12 Pict.-13 Pict.-14 Pict.-15 Pict.-8 Pict.-7 Pict.-5 Pict.-6 Pict.-1 Pict.-2 Pict.-3 Pict.-4 Step one: Pick up the stand accessory from the package as Pict.-1. Step two: T ake out the rectangle patch from the stand haead as Pict.-2, Pict.-3 & Pict.-4. Step three: Loose t[...]

Warning This operation instruction is only intended for reference. No further notice is available to any modification of all information contained therein. Due to continuing improvements, the features and design are subject to change without notice. Warning There is no component that can be repaired in the TV set. Do not try to disassemble and impr[...]