Craftsman 973.11147 инструкция обслуживания

Owner's Manual Variable Speed / Reversible 318 in. 13.2 VOLTS CORDLESS DRILL-DRIVER Model No. 973.111470 Save this manual for future reference CAUTION: Read and follow all Safety Rules and Operating In- structions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit th[...]

• Warranty ......................................................................................................................................................... 2 • Introduction and Product Specifications ......................................................................................................... 2 • Rules For Safe Operation [...]

The purpose of safety symbols is to attract your attention to possible dangers. The safetysymbols, and the explanations with them,deserve your carefulattention and understanding. The safetywarnings do not by themselves eliminate any danger. The Instructions or warningsthey give are not substitutesfor proper accident prevention measures. SYMBOL MEAN[...]

RULES FOR SAFE OPERATION (Continued) • NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor could ignite flam- mable liquids, gases, or fumes. • KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products or any strong solvents to clean y[...]

:+'. RULES FOR SAFE OPERATION (Continued) M n An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. b. T[...]

The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • 30-Pc. Power ScrewdriveriNutddver Set and Case • 17-Pc. Power Screwdriver/Nutdriver Set and Case • High Speed Bits (For Wood or Metal)...3/4 in. Max. • Keyless Chuck (Item No. 9-20988) WARNING: The use of atta[...]

:. ,:;.: _, WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. _IL WARNING: Do not allow familiarity with your drill-driver to make you careless. Remember that a careless fraction of a second is suff[...]

REVERSIBLE See Figure 3. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the [...]

KEYLESS CHUCK See Figure 5. INSTALLING BITS See Figure 7. Your new drill has a keyless chuck. As the name implies, • you can hand tighten or release drill bits in the chuck jaws. Grasp and hold the collar of the chuck with one hand. Rotate the chuck body with your other hand. The • arrows on the chuck indicate which direction to rotate the chuc[...]

REMOVING BITS See Figure 7. • Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 2. • Loosen the chuck jaws from driU bit. • To loosen: grasp and hold the collar of the chuck with one hand, while rotating chuck body with your other hand. Note: Rotate chuck body in the direction of th[...]

DRILLING See Figure 11. OVERLOAD Your drill has a built-in overload protsctor to protect the motor during overloading or prolonged use. The overloed protector automatically activates to break the circuit. When this occurs, allow your drill to cool a few seconds before resuming operation. CHUCK REMOVAL See Figures 12, 13, and 14. The chuck must be r[...]

CHUCK REMOVAL (Continued) Insert hex key wrench in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a counterclockwise direction. This will loosen chuck on the spindle. It can now be unscrewed by hand. See Figure 14. Fig. 14 TO RETIGHTEN A LOOSE CHUCK The chuck may become loose on spindle and develop a wobble. Periodically check [...]

To preserve natural resources, please recycle or dispose of batteries property. This product contains nickel- cadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. BA'R'ER[...]

14[...]

CRAFTSMAN 3/8 In. 13.2 VOLTS CORDLESS DRILL-DRIVER - MODEL NO. 973.111470 The model number will be found onaplate attached tothe motor housing. Always mention the model number in all correspondence regarding your 3/8 in. 13.2 VOLTS CORDLESS DRILL-DRIVER or when ordering repair parts. SEE BACK PAGE FOR PARTSORDERING INSTRUCTIONS i I 2 3 4 Key Part N[...]

For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM E sM Anytime, day or night (1-800.469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime[...]