Craftsman 358.799432 инструкция обслуживания

Operator's Manual I CRRFT$1VlRN°I 12 AMP Motor 195 MPH/405 CFM ELECTRIC BLOWERNACUUM Model No. 358.799432 • Safety • Assembly • Operation • Maintenance • Espar_ol, p 11 FOR HOUSEHOLD USE ONLY WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. For answers to your questions about thi[...]

Warranty Statement 2 Parts Available 10 Safety Rules 2 Storage 10 Assembly 5 Troubleshooting Table 10 Operation 8 Maintenance 9 Spanish 11 Service &Adjustments 10 Parts Ordering Back Cover ONE YEAR FULL WARRANTY ON SEARS CRAFTSMAN ELECTRIC BLOWER When used and maintained according to the operator's manual, if this product fails due to a de[...]

ELECTRICAL SAFETY AWARNING: Avoid a dangerous environment. To re- duce the risk of electrical shock, do not use in rain, in damp or wet locations, or around swimming pools, hot tubs, etc. Do not expose to snow, rain, or water to avoid the possibility of electrical shock. Do not use on wet surfaces. Do not handle extension cord plug or unit with wet[...]

DOUBLE INSULATION CONSTRUCTION This unit is double insulated to help protect against electric shock. Double insulation construction consists of two separate "layers" of electrical insula- tion instead of grounding. Tools and appliances built with a double insulation system are not in- tended to be grounded, No grounding means is provided [...]

people or animals, break glass, or cause other damage. • Never use for spreading chemicals, fertilizers, or any other substances which may contain toxic materials. VACUUM SAFETY • Stop the motor and disconnect the power source before opening the air inlet door or attempting to insert or re- move the vacuum tubes. The motor must be stopped and t[...]

3lower outlet Blower Tube/Nozzle VACUUM ASSEMBLY NOTE: Assembly instructions for using your unit as a blower are explained in the previous section. If you have already assembled your unit for use as a blower, remove the blower tube/nozzle. REMOVE THE INLET RESTRICTOR An inlet restrictor is used when using your unit as a blower. This restrictor is n[...]

ADJUSTING THE SHOULDER STRAP ON THE COLLECTION BAG 1. Carefully loop tile shoulder strap through the buckle as shown in the illustration below. Last In _ 2. Position the unit on your right-hand side, blower outlet and bag pointing toward the rear. Hold the unit in an upright position with the lower vacu- um tube on the ground to support it. 3. Plac[...]

KNOW YOUR ELECTRIC BLOWER READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations to your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. MULCHING BLADES As a standard feature, tile impeller on your blower also functions as[...]

• Blowing grass clippings, straw, or leaves into piles, or removing debris from corners, around joints, or be- tween bricks. Direct air flow by directing the blower tube/nozzle down or toone side. Always work away from solid objects such as walks, large stones, vehicles, and fences. Clean corners by starting in corners and moving outward. This wi[...]

HOW TO REMOVE AN OBJECT FROM THE AIR INTAKE _WARNING: Stop the unit and disconnect from the power source be- fore opening the inlet cover. The mo- tor must be stopped and the impeller blades no longer turning to avoid seri- ous injury from the rotating blades. 1. While holding the inlet cover open, remove the vacuum tubes. The in- let cover must be[...]