Cobra ESD-9210 инструкция обслуживания

Operating Instructions for Y our Cobra ® 10 Band ™ Extra Sensor y Detection ® RADAR/LASER DETECTOR MODEL ESD – 9210 Nothing comes close to a Cobra™ X K Ka V S[...]

X K Ka V S windshield bracket mount ON-OFF/VOLUME control radar , VG-2 and safety/strobe indicators SmartMute™ indicator signal strength, laser and CITY/HIGHW A Y mode indicators 12V DC POWER JACK • “INST ANT -ON” speed monitoring detection • TONE ALERT or VOICE ALERT ™ with adjustable volume • UL TRABRIGHT ™ DA T A DISPLA Y is easy[...]

Important Information A1 T able of Contents Important information about... Federal Laws, Safety Alert ® /Strobe Alert ™ , Safe Driving, Security of Y our Vehicle, Customer Support .................................................................................. A1 Installation ....................................................................[...]

3 1 INST ALLA TION Where to Mount Y our Unit Y ou will get optimum performance from your ESD-9210 if you mount it at a point approximately in the center of the vehicle, as low as possible on the front windshield without obstructing the unit's view of the road either to the front or rear . Y ou can also mount it directly on the dashboard. The u[...]

1 INST ALLA TION Dashboard Mounting 1. Place the detector on the dashboard to find a location where the unit has a clear , level view of the road. The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one side of the hook-and-loop fastener . 3. Attach the pad to the dashboard at your chosen location and remove the other pap[...]

3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS 7 6 X K Ka V S X K Ka V S City mode Highway mode When changing the settings on your ESD-9210, please keep in mind: • Buttons can have multiple functions. • Depending on your choice of V oice Alert™ or T one Alert mode, you will hear either voice messages or tones confirming changes in settings[...]

3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS Muting an Alert Y our ESD-9210 allows you to quickly turn off an audio alert by momentarily pressing the MUTE button. If you press the MUTE button a second time during the alert, the audio alert will be turned back on. Auto Mute Mode Auto Mute will automatically reduce the audio volume of all alerts[...]

3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS 11 10 Setting the SmartMute ™ Activation Point Y our ESD-9210 must be installed in your vehicle. Caution: Do not attempt to set the rev point while driving. Y our vehicle should be parked and idling . SmartMute™ must be turned on. Depending on whether the unit is in T one Alert or Voice Alert™[...]

3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS Vo ice/T one Setting Y ou can set your ESD-9210 to sound alerts with either a voice or a tone. Y ou change settings by using the MUTE button. In V oice Alert™ mode you will first hear several tones, then a voice message announcing the type of signal detected, followed by more tones. In T one Alert[...]

4 DETECTION 15 4 DETECTION 14 Signals Detected The tables on the following pages show you the types of signals your ESD-9210 will detect, as well as the voice and visual alerts it provides for each one. Audio Alerts In V oice Alert™ mode you will first hear several tones, then a voice message announcing the type of signal detected, followed by mo[...]

4 DETECTION 4 DETECTION 17 16 PLEASE NOTE : There are different tones for each Safety Alert ® VG-2 Alert ® Safety Alert ® T ype of Signal emergency vehicles road hazards trains V oice ” emergency vehicle approaching “ ” road hazard ahead “ " train approaching " Visual Display S S S T ype of Signal Interceptor VG-2™ V oice “[...]

5 5 UNDERST ANDING RADAR & LASER Radar Speed Monitoring Systems Three band frequencies have been approved by the Federal Communications Commission (FCC) for use by speed monitoring radar equipment: X band 10.525 GHz K band 24.150 GHz Ka band 33.400-36.00 GHz Y our ESD-9210 detects signals in all three radar bands. VG -2 VG -2 is a "detecto[...]

6 MAINTENANCE & SERVICE 6 MAINTENANCE & SERVICE 21 20 If you suspect that your unit requires service, please call 773-889-3087 BEFORE shipping it to Cobra . ® This will ensure that you receive service as quickly as possible. If you are asked to send your unit to the Cobra ® factory , please follow these steps: 1. Send the complete unit, i[...]

23 7 W ARRANTY 22 COBRA ELECTRONICS CORPORA TION warrants that its Cobra ® 10 Band™ Radar/Laser Detectors, and the component parts thereof, will be free of defects in workmanship and materials for period of one (1) year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser , provided that the pro[...]

10 ORDER FORM 25 For credit card orders fill out order form and fax to: 773.622.2269 or call 773.889.3087 (Press 1 from the main menu) 8:00 am - 6:00 pm, M-F , CST . Make check or money order payable to: Cobra Electronics 6500 West Cortland Street Chicago, IL 60707 USA Attn: Accessories Dept. To order online, please visit our website at: www .cobra[...]

Printed in Korea Part No. 480-017-P ©2002 Cobra Electronics Corporation 6500 W est Cortland Street Chicago, IL 60707 USA The Cobra ® line of quality products includes: CB radios microT ALK ® radios Radar/Laser Detectors Safety Alert ® T raffic W ar ning Systems Accessories HighGear ™ Accessories For more information or to order any of our pro[...]