Clifford Eagle II инструкция обслуживания

Owner' s Manua l World-Clas s Aut o Securit y T M[...]

Table of Contents Standard Features of the Eagle II . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Your 4-button/12-channel remote controls . . . . . . . . . . 6 How to use your keychain remote control . . . . . . . . . 6 Anti-CodeGrabbing (ACG) with Random Code Encryption . 9 Tamper-proof dual[...]

Table of Contents (cont.) FACT — False Alarm Control and Test . . . . . . . . . . . . 11 Smart boot release option . . . . . . . . . . . . . . . . . . 11 Smart prior intrusion attempt alert . . . . . . . . . . . . . . 11 Smart AutoTesting . . . . . . . . . . . . . . . . . . . . . . . 12 Automatic malfunction bypass . . . . . . . . . . . . . . . 1[...]

Standard Features of the Eagle II ✔ Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details). ✔ FA CT — F alse A larm C ontrol and T est — One of many patented Clifford innovations, FA CT absolutely, positively ends recu[...]

Standard Features of the Eagle II (cont.) ✔ Tamper-Proof Dual-Point AutoImmobilisation —While the Eagle II is armed, the entire ignition and starter systems are immobilised. For unmatched securit y , even if a thief were to cut all the alarm wires, he would still be unable to start the engine. ✔ Remote Door Lock/Unlock Capability — No mo re[...]

Standard Features of the Eagle II (cont.) ✔ Use r-Selectable AutoArming — Automatically arms itself “passively” if you forget to arm it with the remote control. AutoArming Enable/Disable — You may disable or re-enable AutoArming with just a few flicks of a switch. AutoArm & Lock — You may set the system to automatically lock the doo[...]

Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Eagle II. Clifford Electronics has long been recognised as the world’s leading manufacturer of high-technology vehicle security systems. Buying Clifford has always meant buying the best. In fact, Clifford Electronics holds more patent[...]

To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For instance, to transmit channel 3, press button 3. While you transmit, the LED indicator will flash once every second: this indicates level 1 . To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This shifts buttons 1–4 to level 2 (channels 5?[...]

TO ARM THE SYSTEM . . . . . . . Press button 1 (channel 1) once. You will hear two chirps and the indicator lights will flash twice. The dashboard LED will flash repeatedly and the car doors will automatically lock. TO DISARM THE SYSTEM . . . . . . . Press button 1 (channel 1) again. One chirp and one indicator light flash confirms disarming. In ad[...]

Anti-CodeGrabbing (ACG) with Random Code Encryption ACG protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers literally record, from hundreds of meters away, the code sent by your car alarm remote control. Then the thief simply plays back the code when you[...]

AutoArming If this feature is enabled and you forget to remotely arm, the system automatically arms itself 30 seconds after the vehicle doors are closed. If you re-open any door(s) within the 30-second countdown, AutoArming will restart from the beginning once all doors are closed. Eagle II has these additional AutoArming features: AutoArming enabl[...]

Remote controlled valet mode entry and exit You can even remotely enable or exit valet mode with your 4-button/12-channel ACG remote control. All you need to do is transmit channel 5 (one press of the side LevelShift button, then press button 1). In addition to the previously noted indications, two indicator light flashes will confirm that you have[...]

Smart AutoTesting Eagle II automatically tests all triggers and sensors every time you remotely arm. If a trigger is malfunctioning, you will be alerted immediately with 4 chirps and 4 flashes instead of the usual 2 and 2. If a door * is ajar or a sensor is malfunctioning, you will receive the usual 2 chirps and flashes, then, 5 second later , ther[...]

How to interpret the chirps and indicator light flashes When you use the remote control, the system responds with chirps (unless the chirp muting feature is turned on) and indicator light flashes: Chirps and flashes Meaning 1 Your system is disarmed or you have remotely exited valet mode (see above) 2 Your system is armed or you have remotely engag[...]

User-selectable features Your Eagle II vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table be[...]

Feature Factory setting # of flicks and chirps Secondary action Program completion confirmation Result Add a New Remote to Channel 3 (silent arm/disarm) — 15 Press remote control button 3 3 chirps Button 3/channel 3 code of the new remote control has been memorised Add a New Remote to Channel 4 (remote accessory) — 16 Press remote control butto[...]