Clifford Concept 40 инструкция обслуживания

Owner' s Manua l World-Clas s Aut o Securit y T M concep t 4 0[...]

All Concept Series systems are covered by one or more of the following Clifford Electronics patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375 and other patents[...]

Table of Contents Standard Features of the Concept 4O . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . 10 How to use your keychain remote control . . . . . . . . . . . . . 10 What each button/channel does . . . . . . . . .[...]

Table of Contents (cont.) How to interpret the LED status indicator . . . . . . . . . . . . . . . 16 Automatic Battery-Saving Mode . . . . . . . . . . . . . . . . . . 16 Remote controlled sensor adjustments . . . . . . . . . . . . . . . . 17 Remote controlled override of one or both sensor zones . . . . . . 17 AutoLock and AutoUnLock™ . . . . . .[...]

Standard Features of the Concept 4O ✔ Lifetime Warranty —For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details). ✔ FACT™—F alse A larm C ontrol and T est — One of many patented Clifford innovations, FACT absolutely, positively ends recu[...]

Standard Features of the Concept 4O (cont.) ✔ Remotely Adjustable Dual-Zone Proximity Sensor™ — With just a touch on the remote, you may, at any time or place, adjust and test the sensitivity of this microprocessor-controlled passenger compartment sensor. The two sensor zones provide full perimeter protection: If someone is lurking near your [...]

Standard Features of the Concept 4O (cont.) ✔ Built-In Parking Light Flasher —Visually confirms door lock and system status. ✔ Remote Controlled Courtesy Lighting —For your personal safety and convenience, when you remotely disarm your Concept 40, the interior lights turn on and stay on until you start the engine or 30 seconds, whichever oc[...]

Standard Features of the Concept 4O (cont.) ✔ Remote Headlight Activation Capability — Remotely turn on the headlights to illuminate your way to and from your vehicle (requires an optional relay). ✔ Patented Smart AutoTesting™ —Automatically tests all system triggers and sensors every time you remotely arm and warns you if you accidentall[...]

Standard Features of the Concept 4O (cont.) ✔ High-Output Insignia Siren — A loud yet compact siren designed exclusively by Clifford Electronics for far superior performance, features, reliability and even aesthetics to all other manufacturer’s look-alike, sound-alike sirens. Ultra-Reliability — Since sirens are installed in the engine comp[...]

Standard Features of the Concept 4O (cont.) ✔ Patented Remote Control Code Learning — Just a few flicks of a switch lets you match to the system up to 4 different 12-channel Clifford remote controls. Just as easily, a lost or stolen remote control can be deleted from the system memory. ✔ Multiple-Car Control — Lets you use the same remote t[...]

Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Concept 40 vehicle security/convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories. In fact, Clifford Electronics holds more pa[...]

Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system. [...]

What each button/channel does Your Concept 40 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel except 9 through 12 to any function (see pages 20-24). The following chart indicates what each remote control channel number does, and how to transmit each channel num[...]

TO ACTIVATE THE PANIC FEATURE . . . . . . . . . . Press button 1 (channel 1) for 3 seconds. The parking lights will flash repeatedly and the siren will blare for 30 or 60 seconds (user-selectable), or until you press button 1 again to turn it off. If the ignition is on (indicating you are in the car), the doors will automatically lock to prevent an[...]

Anti-CodeGrabbing™ (ACG) with Random Code Encryption A Clifford exclusive that protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers are far more effective and efficient than scanning. Unlike scanners that sequentially transmit one digital code after ano[...]

UltraSecure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system. How? To enable valet mode, t[...]

To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all Concept Series systems have the same factory-set code, it is highly advisable[...]

FA CT™— False Alarm Control an d T est With FACT, you’ll never experience repeated false alarms. If the Insignia Siren goes off, DO NOT remotely disarm the system; allow it to run for the full siren duration. Before sounding the siren a second time, the system automatically checks for another activated trigger to verify that an intrusion is i[...]

Remote controlled sensor adjustments Due to ever-changing conditions, all alarms require periodic fine-tuning of their sensors. Other alarms require repeated trips back to the dealer. Not so with Concept 40. You can adjust sensitivity of each sensor zone electronically without tools and without even knowing where the sensors are mounted! If the set[...]

Smart AutoTesting™ Each time you remotely arm the system, it tests all triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2. If a door is ajar, you will receive the usual 2 chirps and flashes, the[...]

Smart prior intrusion attempt alert If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you enter the vehicle and turn on the ignition (or start the engine), the LED will blink 1–5 times, pause, then repeat the blink cycle 4 more times. Count the number of blinks in one cycle an[...]

User-selectable features Your Concept 40 allows you to set many of its features to your own personal preferences. Although the system’s programming capabilities are very extensive, we have made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times. Once you’ve changed a few settings, you’ll [...]

EXAMPLE 1: Turn off Headlight Reminder: If you park your car and begin to exit while the headlights are still on, the Headlight Reminder feature is set to issue a warning sound to remind you to turn them off (see Headlight Reminder on page 13) To turn this feature off, you’ll note that “Headlight Reminder” in column 1, row 6 of the Table (on [...]

4. Now look up the location on the table of siren duration. Note that it’s in column 3, row 5 (latched, center, latched, center, latched, center, wait for the 3-chirp/column 3 confirmation, then 5 momentary presses). After a brief pause, you’ll hear two chirps to confirm that the siren duration is now set to 60 seconds. 5. To exit the program m[...]

Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Row 1 1st momentary Add new remote to channel 1 info on page 11 NOTE 1 AutoLock on /off info on page 17 Enhanced AutoArming: on /off info on page 13 Row 2 2nd momentary Add new remote to channel 2 info on [...]