Cisco Systems CIVS-IPC-2630V инструкция обслуживания

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco V ideo Sur v ei llance 2630 IP Dome User Guide Model CIVS-IPC-2630 V Text Part Number: OL -24130-02[...]

NOTICE. ALL STATEMENTS, INF ORMATION, AND R ECOMMENDATION S IN THIS MANU AL ARE BELIEV ED TO BE ACCURATE BUT ARE PRESEN TED WITHOUT WARRANTY OF ANY KI ND, EXPRES S OR IMPLIED. USERS MUST TAK E FULL RESPONS IBILITY F OR THEIR APPLI CATION OF ANY P RODUCTS. THE SOFTWARE L ICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PROD UCT ARE SET FO RTH IN THE[...]

iii Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 CONTENTS Preface vii Overview 1-vii Organization 1-vii Obtaining Documentation, Obtaining Support, and Security Guid elines 1-vii CHAPTER 1 Overview 1-1 Features 1-1 IP Camera Overview 1-2 Physical Details 1-3 Package Contents 1-6 CHAPTER 2 Getting Started 2-1 Before You Begin 2-1 Ins[...]

Contents iv Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Users Window 3-12 Maintenan ce Window 3-14 Firmware Window 3-15 Audio/Video Windows 3-16 Video Window 3-16 Audio Window 3-23 Privacy Region Window 3-24 Focus/Zoom Window 3-24 Security Windows 3-25 Initialization Window 3-25 Complexity Window 3-26 Applications Windows 3-27 Mail[...]

vii Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Preface Overview This document, Cisco V ideo Surveillance 2630 IP Dome User Guide, pro vides information about installing, conf iguring, using, managing, and tr oubleshooting the Cisco V ideo Surveillance 26 30 IP Dome, model CICS-IPC-2630V . Organization This manual is o rganized as [...]

viii Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Preface Obtaining Documentation, Obtaining Support, and Security Guide lines[...]

CH A P T E R 1-1 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 1 Overview This chapter pro vides an overvi ew of the Cisco V ideo Surv eillance 2630 IP dome and its features. It includes these topics: • Features, page 1-1 • IP Camera Over view , page 1-2 Features The Cisco V ideo Survei llance IP cameras of fer a feature-rich di[...]

1-2 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 1 Overvi ew IP Camera Overview • Motion detection— The IP cameras can detec t motion in up to four d esignated fields of view b y analyzing changes in p ixels and genera te an alert if motion is detected. • Flexible scheduling— Y ou can conf igure the IP cameras to res[...]

1-3 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 1 Overview IP Camera Overview Physical Details Figure 1-1 and the table that foll ows descri be the items on the top of the 2 630 IP dome. Figur e 1 -1 T op of the 2630 IP Dom e 1 Network LED (amber) Indicates information about the network connections as follo ws: • On—LA[...]

1-4 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 1 Overvi ew IP Camera Overview 3 Audio port Allo ws the connection of the audio Y cable that is pro vided with the IP camera. Y ou can connect an optional ex ternal speaker , optional e xternal microphone (with pre-ampl ifier), or both de vices through this cable. Each de vice[...]

1-5 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 1 Overview IP Camera Overview Figure 1-2 and the table that foll ows descri be the items on the bottom of the 26 30 IP dome. Figur e 1 -2 Bott om of the 2630 IP Dome 1 USB port Reserved for future use 2 Analog vid eo output 3.5 mm video jack for video ou tput to an analog mon[...]

1-6 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 1 Overvi ew IP Camera Overview Package Contents The the Cisco V ideo Surveillance IP Camera package includes these items: • Cisco V ideo Surveillance 2630 IP Camera Qu ick Start Gu ide (qty . 1) • Regulatory Compliance and Safety Information document (qty . 1) • Camera w[...]

CH A P T E R 2-1 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 2 Getting Started This chapter pro vides instructions for installin g and performing the initial setu p of the Cisco V ideo Surveillance IP Camera. It also de scribes how to access the IP camera through a web browser so that you can config ure it or vie w video from it, [...]

2-2 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome War ni ng The power supply must be placed indoors. Statement 331 Note If you use the IP camera outdoo rs, place the camera and the po wer supply in a suitable NEMA enclosure. War ni ng This product requires[...]

2-3 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome • Run a po wer cable from a 24 V A C power adapter to the mo unting location. Use a cable gauge that is a ppropri ate for the distance from the IP do me to the pow er supply (consult a qualified electric[...]

2-4 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome Mounting with a Conduit Base Y ou can mount the 2630 IP do me with an optional co nduit base ( CIVS-IPCA-1006= ) in situations where you cannot cut a hole through a surface for cables or where cables run th[...]

2-5 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome Step 2 Remove the Pri vacy shield b y squeezing it inward to release it from the four tabs that hold it into place (see Figure 2-2 ). Step 3 Remov e the camera unit from the b ase plate by usin g a Phillip[...]

2-6 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome Step 8 Attach the base plate to the conduit ba se with the four screws, provided (see Figure 2-4 ). Note Make sure the that gasket is clean and in place. Figur e 2-4 Attac hing Base Pl ate t o Conduit Base [...]

2-7 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome T o connect a power cable, use a flat-head screwdri ve r to depress the bro w n tabs on the po wer input and connect bare positi ve, nega tiv e, and ground wires as sho wn on the label that is af fix ed to[...]

2-8 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome Step 14 See Figure 2-13 on page 2-18 and tak e these actions to adjust the camera lens to obtain the desir ed image: • T emporarily attach an analog monitor to the IP dome so th at you can see video while[...]

2-9 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome Figur e 2-6 Attac hing the Priv acy Shield and Dome Step 16 Attach the dome assembly by al igning its tab with the opening in th e base plate, pressing it i nto place, and securing the three TO RX screws ([...]

2-10 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome Figur e 2-7 Disassembling the 2630 IP Dome Components Step 2 Attach the pendant to a ceiling or w all with 4 scre ws, as shown in Figure 2-8 . Y ou can m ount the pendant using t he inside mounti ng holes [...]

2-11 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome Figur e 2-8 Att aching the P endant t o a Ceiling or W all Step 3 Attach the conduit base t o the pendant with 4 scre ws, as shown in Figure 2-9 . Make sure the gasket on the pendant is in place and clean[...]

2-12 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome Step 4 Attach the base plate to conduit with 4 screws, pro vided, as shown in Figure 2-10 . Make sure that the gasket is clean and in place. Figur e 2-1 0 Attac h ing the Base Plate to the Conduit Step 5 P[...]

2-13 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2630 IP Dome Step 9 Attach the camera unit to the base plat e by aligning t he three tabs on the camera unit with the slots on the base plate, pressing the camera unit into the base plate until the tabs snap into plac[...]

2-14 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Performing the Initial Setup of the IP Camera Step 11 Replace the pri vac y shield by squeezin g it to f i t inside the four tabs on the camera unit (see Figure 2-12 ). Make sure to adjust the pri vac y shield inside the dome and trim ring assembly so that i[...]

2-15 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 2 Getting Started Performing the Initial Se tup of the IP Camera In addition, you must kno w the IP address of the IP camera. By default , when the IP camera po wers on, it attempts to obtain an IP address from a DHCP serv er in your netw ork. If the camera cann ot obtain an[...]

2-16 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Accessing the IP Came ra Windows Accessing the IP Camera Windows After you perform the in itial conf iguration as described in the “Perform ing the In itial Setu p of the IP Camera” section on page 2-14 , follo w the steps in this section each time that [...]

2-17 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 2 Getting Started Adjusting the Video Image • Enter the follo wing for a non-secure connection if the IP address is 203 .70.212.52 and the HTTP port number is 10 24: http://203.70.212 .52:1024 Step 2 Enter your IP camera user name and password when pro mpted, then click OK[...]

2-18 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Adjusting the Video Image or aw ay from the camera. T ake care not to pull the lens completely a way from the camera.Obtain a sharp picture in both wide-angle and telephoto po sitions. When the focus is set as desired, use the Allen wrench to tighten the bac[...]

2-19 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 2 Getting Started Powering the IP Camera On o r Off Powering the IP Camera On or Off The IP camera does not include an on/ off switch . Y ou power it on or off b y connecting it to or disconnectin g it from a power source. When you po wer off the IP camera, it retains conf i[...]

2-20 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 2 Getting Started Cleaning the IP Camera[...]

CH A P T E R 3-1 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 3 Configuring and Managing the IP Camera The Cisco V ideo Surv eillance IP Camera pro vides conf iguration windo ws that you use to conf igure and manage the IP camera. This chapter explains ho w to access the configuration windo ws, describes each windo w , and pro vide[...]

3-2 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Configuration Overview Ta b l e 3-1 Guid elines fo r Configur ing the IP Camera Configuration Item Explanation Guidelines for Use Reference IP camera name and description Identifies the IP camera. Recommended. See the “Basic Setup W[...]

3-3 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Configuration Overview Audio options Includes options for audi o streams that are received or sent by the IP camera. Required if you use an external microphone or speaker . See the “ Audio Windo w ” section on page 3-23 . Pri vac [...]

3-4 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Navigating the Configuration Windows Navigating the Configuration Windows After you access the conf iguration windo ws as described in the “ Accessing the IP Camera Windo ws” section on page 2-1 6 , a window appears that includ es[...]

3-5 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Setup Windows • Status – System – Audio/V ideo – Network – Syslog & Log – V ideo Log Setup Windows The Setup windows let you configure a v ari ety of basi c and advanced settings for the IP camera, and to designate IP [...]

3-6 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Setup Window s Description Enter a description of the IP camera. F or exampl e, enter the I P camera location, such as “North Entran ce. ” The description can includ e any combination of up to 32 letters, nu mbers, and spaces. Ena[...]

3-7 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Setup Windows Advanced Setup Window The Adv anced Setup w indow provides options for conf iguring v arious networ k and protocol settings for the IP camera. T o display the Adv anced Setup windo w , access the configurat ion windo ws [...]

3-8 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Setup Window s Ta b l e 3-3 Adv anced Setup Window Options Option Description CDP Enable CDP (Cisco Discovery Protocol) Check this check box if CDP is enabled in your network and you w ant the IP camera to send CDP discovery messages.[...]

3-9 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Setup Windows Max R TP V ideo P acket Length Maximum number of bytes per vi deo packet that are sent in each R TP request. Conf igure a lo wer number if you are streaming vi deo to a cell phone that requires smaller data packets. V al[...]

3-10 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Setup Window s IP Filter Window The IP Filter wi ndow p rovides optio ns for controlling access to the IP camera b y designating a list of IP addresses that can access the IP camera and a list of IP addre sses that cannot access the [...]

3-11 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Setup Windows EAPOL Window The EAPOL windo w provides options for conf iguring Extensible Authentication Pr otocol Over LANs (EAPOL). This protocol is used to aut henticate and control user traf fic in an 802.1x netw ork. T o display[...]

3-12 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Administration W indows Administration Windows The Administration win dows let you conf igure IP came ra users, reset or rest art th e IP camera, and upgrade f irmware on the IP camera . The follo wing sections describe t he Administ[...]

3-13 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Administration Windows Ta b l e 3-6 describes the opti ons in the Users windo w . Ta b l e 3-6 Users Window Options Option Description Administrator User ID Display only . The user ID for the IP camera administrator is Admin. The adm[...]

3-14 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Administration W indows Maintenance Window The Maintenance windo w provid es options for resetting or restarting t he IP camera, saving conf iguration information fro m the IP camera, and upload ing the conf iguration informati on to[...]

3-15 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Administration Windows Firmware Window The Firmware win dow lets y ou view i nformation about the fi rmware that is inst alled on the IP camera and upgrade the firmw are. Before you upgrade f irmware, do wnload the firmw are fil e to[...]

3-16 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows Audio/Video Windows The Audio/V ideo windows pr ovide options f or confi guring audio and video from t he IP camera. The follo wing sections describe the Au dio/V ideo windo ws in detail: • V ideo W indow , page[...]

3-17 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Audio/Video Window s Ta b l e 3-9 Video Wind ow O ptions Option Description Streaming Mode Choose the m ode that the I P ca mera uses for video streaming: • Single H.264 Stream —Co nfigures H.264 fo r the primary stream. The stre[...]

3-18 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows Max. Frame R ate Choose the desired maxi mum frame rate per second for the pr imary video stream from the IP camera. The default v alue s are 30 for NTSC and 25 for P AL. A higher maximu m frame rate provi des bet[...]

3-19 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Audio/Video Window s V ideo Quality Control Choose an option for the video quality of the pri mary video stream from the IP camera: • Constant Bit Rate —Specif ies that the video stre am is output at or close to the constant bit [...]

3-20 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows Fixed V ideo Quality Specif ies that video is output at a f ixed quality , which ranges from V ery High to V ery Low . The bit rate may v ary to maintain this quali ty . The default f ixed quality is Normal. A hig[...]

3-21 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Audio/Video Window s Frame Repeat Count Designates ho w video output from the IP camera displays. The I P camera generates two independent f ields (odd and e ven) for each v ideo capture, which occur 60 tim es per second for NTSC or [...]

3-22 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows V alida tion Time If the Switch Mode option is set to Auto , specify the time that the camera waits before swit ching Day/Night modes. The li ght le vel must continually exceed the t hreshold for the duration of t[...]

3-23 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Audio/Video Window s Audio Window The Audio windo w provides op tions for enabling and co nf iguring audio that is transmitted to and from the IP camera. Y ou can confi gure audio for these devices: • External microphone—Y ou can[...]

3-24 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows Privacy Region Window The Pri vac y Region windo w provides options for creating up t o four user-def ined masking zones that can be used to pro vide regions of pri vac y in the camera f ield of vie w . V ideo wit[...]

3-25 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Securit y Windows Security Windows The Security windo ws provide options for stopp ing IP camera processes, confi guring administr ator and root password requ irements, and enabling access to the IP camera throug h HTTP or Secure She[...]

3-26 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Security Windows Complexity Window The Complexi ty windo w provides o ptions for conf iguring requirem ents for the IP camera administrator and user passwords. Ta b l e 3-14 describes the options in t he Complexity w indow . Ta b l e[...]

3-27 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows Applications Windows The Applications windo ws provide options for conf iguring and managing a va riety of applications and IP camera acti vities. The follo wing sections describe t he Applications windo ws in de[...]

3-28 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Applications W indows If you change any options in the Mail/FTP/HTTP windo w , you must click Sa ve to sav e the changes. T o discard the changes, click Cancel before clicking Sav e . These buttons appear at the bottom of the windo w[...]

3-29 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows E-mail Bo dy Attach V ide o Streaming URL Address Check this check box t o include in the mes sage body the URL of an FTP server from which y ou can downlo ad a video fi le to your local PC. Primary FTP Primary F[...]

3-30 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Applications W indows Motion Detection Window The Motion Detection wi ndo w allo ws you to configu re up to four re gions in a vid eo field. The IP camera monitors acti vity in each re gion. If activity e xceeds a configured threshol[...]

3-31 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows Event Window The Event wi ndo w provides op tions for conf iguring ho w the IP camera handles e vents. An e vent is either of the follo w ing: • Motion that the IP camera detect s. For related informatio n abou[...]

3-32 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Applications W indows If you change an y options in the Ev ent window , ex cept deleting an e vent from t he ev ent schedule list, you must click Sa ve to s av e the change s. T o discard the ch anges, click Cancel before clicking Sa[...]

3-33 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows Actions Choose the desired options to designate acti ons that the camera takes when e vents occur: • E-Mail —Sends e-mai l ev ent notification messages to an SMTP serv er . The e-mail messa ges notify you th [...]

3-34 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Applications W indows SNMP Window The SNMP windo w allows you to configure S imple Network Management Protoc ol (SNMP) settings for the IP came ra. These se ttings can help you m anage complex netwo rks by sending messages to dif fer[...]

3-35 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows Alarm I/O Ports Window The Alarm I/O Ports windo w allows you to con figure v arious options for the t wo input and tw o output ports on the IP camera. A state chan ge of an inp ut ports triggers a ca mera to tak[...]

3-36 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows Status Windows The Status windo ws provide options for v iewi ng and managing a v ariety of system information. The follo wing sections describe the Status windows in detail: • System W indow , page 3-36 • Audio/V [...]

3-37 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Audio/Video Window The Audio/V ide o window displays informati on abou t the audio and video str eams from the IP camera. Y ou conf igure audio options as described i n the “ Audio W indo w” section on page 3- 23 .[...]

3-38 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows Network Win dow The Network windo w displays information about v arious IP camera network settings and operations. Y ou configu re the settings as described in the “Basic Setup W ind o w” sectio n on page 3-5 . T o[...]

3-39 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Ta b l e 3-23 Sy slog & Log W indow Options Option Description Local Log Minimum Log Se verity Choose the minimum sev erity of messages that the appear in t he log fil e. The system logs all messages of this sev e [...]

3-40 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows Ta b l e 3-24 describes the messages that can appear in the IP camera log f ile. When you vie w the log f ile, each message includes t he date and time that it wa s logged. Minimum Log Se verity Choose the minimum sev [...]

3-41 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Audio: Disable micropho ne. Captures information when audio devices are enabled or disab led in the Audio w indow . Audio: Disable speaker . Audio: Enable microphon e. (audio type: G.711 A-Law) Audio: Enable microphon [...]

3-42 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows output: F ailed to set output port P ort_Number . Provides information wh en you confi gure the output ports on the I P camera. output: Set output port P ort_Number to high O K. output: Set output port P ort_Number to [...]

3-43 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Stream: R TSP stream started. [ip: Ty p e , UDP: Addr ess_1 : Po r t _ 1 -> A ddr ess_2 : Po r t _ 2 , Use r ] Provides information wh en an R TSP stream from the IP camera is initiated (R TSP stream started) or sto[...]

3-44 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows Video Log Window The V ie w V ideo Log windo w lets you manage video file s. If the T rigger Event option is enabled in the Event windo w , the IP camera creates a vide o file for each e vent that it detects. The V ide[...]

3-45 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Ta b l e 3-25 Video Log Windo w Options Option Description V ideo Log Displays a list of v ideo logs. Files are named Camera _name-Event_Name-yymmdd -hhmmss.xxx , where: • Camer a_name is the name of the IP camera, a[...]

3-46 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows[...]

CH A P T E R 4-1 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 4 Viewing Live Video After you install and set up the Cisco V ideo Surveillance IP Camera as described in Chapter 2, “Getting Started, ” users can connect to the IP camera through In ternet Explorer and a ccess the Home window to view li ve video from the IP camera. [...]

4-2 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 4 Viewing Live Video Viewing Video thr ough the Home W indow Overview Figur e 4-1 Home Window 1 Digital z oom controls. For deta iled inform ation, see the “Home Win dow Cont rols” section on page 4-3 . 2 IP camera date and time. Y ou configure the dat e and time for the I[...]

4-3 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 4 Viewing Live Video Viewing Video throug h the Home Window Overview Home Window Controls The Home windo w provides controls for se veral IP camera features. Ta b l e 4-1 describes the controls in th e H om e wi n d ow . Note The IP camera administrator and users with the adm[...]

4-4 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 4 Viewing Live Video Viewing Video thr ough the Home W indow Overview Microphon e Of f toggle b utton Click the Microphone Off butto n to mute the audio stream that is captured and sent to the IP camera from the internal or e xternal microphone of the PC that you are using. Wh[...]

4-5 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 4 Viewing Live Video Viewing Video through Th ird-Party Devices or Software Viewing Video through Third-Party Devices or Software Y ou can allow users to access video streams from the IP camera through third-party mob ile devices, o r through the VLC media player or equi vale[...]

4-6 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 4 Viewing Live Video Viewing Video through Third- Party Devices or Software • T o access the se condary H.264 stream with video only , enter this command: rtsp:// ip_addr ess /img/h2 64video2.sav Accessing the Primary MPEG-4 Stream In the follo w ing commands, the ip_addr es[...]

4-7 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Chapter 4 Viewing Live Video Viewing Video through Th ird-Party Devices or Software • T o access the M JPEG stream with video only , enter this command: rtsp:// ip_addr ess /img/jpgvideo.sav Accessing Dual Streams (MPEG-4 + MJPEG) In the follo w ing commands, the ip_addr ess argume[...]

4-8 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 4 Viewing Live Video Viewing Video through Third- Party Devices or Software[...]

CH A P T E R 5-1 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 5 Troubleshooting This chapter describes some common probl ems that may be encountered while usin g the IP camera and provid es possible solutions. Symptom Cannot connect to an IP camera through a web browser . Possible Cause Y ou are not using a supported PC operating s[...]

5-2 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Chapter 5 Tro ubleshooting Symptom The motion detection feature d oes not send e-mail alerts. Possible Cause The e-mail alert feature is not properly configured or the SMTP server that the IP camera uses to send t he e-mail may be f iltering e-mail to pre vent spam from being sent fro[...]

A-1 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 APPENDIX A Using the IP Camera with Cisco VSM Cisco V ideo Surv eillance Manager (VSM) is a suite of p ower ful and fle xible video survei llance applications that interoperate with a wide range of de vices and cameras to pro vide a complete, standards-based video surveillance solutio[...]

A-2 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 Appendix A Using the IP Camera with Cisco VSM[...]

IN-1 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 INDEX A action configuring 3-33 overview 3-31 triggered by eve nt 3-31 ActiveX contro ls 3-30 Administration wi ndows 3-12 Administrator user typ e configuring 3-13 description 3-12 password recovering 5-1 setting 3-13, 3-26 user name 3-13 Advanced Setup window options 3-8 overview 3[...]

Index IN-2 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 Complexity window options 3-26 overview 3-26 configuration guidelin es 3-1 configuration, of IP camera backing up 3-1 4 copying to camera 3-14 saving 3-1 4 uploading 3-14 configuration file saving 3-1 4 uploading 3-15 configuration win dows accessing 2-16 Administration wi ndo[...]

Index IN-3 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 primary 3-7, 3-38 secondar y 3-7, 3-38 DSCP, for QoS 3-10 dual streaming 3-16, 4-5 E EAPOL window options 3-11 overview 3-11 e-mail notification configuring 3-28 enabling 3-33 From field 3-28 FTP server link 3-29 HTTP server 3-29 log file 3-44 primary FTP server 3-29 recipients[...]

Index IN-4 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 figure 4-2 overview 4-1 HTTP accessing camera through 2-16 allowing access through 2-15, 3-26 alternative port 3-8 default port 3-8 HTTPS accessing camera through 2-16 alternative port 3-8 default port 3-8 HTTP server 3-29 enabling sending video file to 3-33 I I/O ports See in[...]

Index IN-5 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 overview 3-10 L LAN port 1-4 LED controlling operation of 3-6 disabling 3-6 enabling 3-6 Network 1-3, 1-6 PoE 1-3, 1-6 lens, adjusting pan, t ilt, rotation 2-17 live video controlling thro ugh Home window 4-1 viewing through Home window 4-3 through home window 4-1 through third[...]

Index IN-6 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 N name, of IP camera 3-5, 3-36 network activity 1-3, 1-6 type 3-38 viewing informat ion about 3-38 Network LED 1-3, 1-6 Network wind ow options 3-38 overview 3-38 night mode, d ay/night vi sion 3-21 night schedule mode, day/ni ght vision described 3-21 end time 3-22 start time[...]

Index IN-7 Cisco Video Surveillance 2630 IP Dome User Guide OL-24130-02 S saturation, of video 3-20 scheduling, events 3-32 SDRAM 3-33, 3-38, 3-44 secure connection 2-16 security password hard ening 3-26 Security windows 3-25 sensitivity PC microphone 4-4 sensor firmware version, of IP camera 3-36 serial number 3-36 Setup link, in Main window 2-15,[...]

Index IN-8 Cisco Video Surveillance 2630 IP Dome User Guid e OL-24130-02 password 3-13 V validation time, d ay/night vision auto mode 3-22 video bit rate 3-17, 3-19 brightness 3-20 contrast 3-20 format 3-20 frame rate 3-18, 3-19 image, adjus ting 2-17 of event 3-27 primary stream 3-16, 3-17, 3-18, 4-5 quality 3-17, 3-19 resolution 3-17, 3-18, 3-38 [...]