Cisco Systems 2691 инструкция обслуживания

Quick Start Guide Cisco 2691 Modular Routers INCLUDING LICENSE AND W ARRANTY 1 Cisco 90-Day Limited Hardware W arranty T erms 2 Documents, Equipment, and T ools 3 Install Chassis 4 Connect Cables 5 P ower Up the R outer 6 P erform Initial Configuration 7 Interface Numbering 8 Where to Go Next 9 Obtaining Documentation 10 Documentation F eedbac k 11[...]

2 1 Cisco 90-Day Limited Hardware Warranty Terms There are special terms app licable to your hardware warranty and v arious services that you can use durin g the warranty period. Y our formal W arranty Statement, includ ing the warr anties and lic ense agreement s applicable to C isco softw are, is a v ailable on Cisco.com. Follo w these step s to [...]

3 2 Documents, Equipment, and Tools User Documentation All the documents referenced in this quick start guide a re availabl e online on Cisco.com. T o be sure of obtaining the latest information, you should access the online documentation. T o view or print a document in its original page fo rmat, access the online docume nt, and click the PDF icon[...]

4 Warning Definition War n in g IMPORT ANT SAFETY INSTRU CTIONS This warning symbol m eans danger . Y ou are in a situation that could cause bodily injury . Before you work on any equipment, be aware of the hazards involved with electrical ci rcuitry and be familiar with standard practices for preventing a ccidents. T o see translations of the warn[...]

5 Avvertenza IMPORT ANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazion e potrebbe causare info rtuni alle persone. Prima di intervenire su qu alsiasi apparecchiatura, occo rre essere al corrente dei pe ricoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. [...]

6 Avi so INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê se e ncontra em uma situação e m que há risco de lesões corporais. Antes de trabalhar com qualquer equipam ent o, esteja ciente dos riscos que envol vem os circuitos elétricos e familiarize-se com as práticas padrão de preven ção de acidentes. [...]

7 Advarsel VIGTIGE SIKKERHEDSANVISNINGER Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadi gelse. Før du begynder arbejde på udstyr , skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardproc edurer til undgåelse af ulyk ker . Brug [...]

8 War n in g This unit is intend ed for installation in restricted access are as. A restricted access area can b e accessed only through the use of a special tool, lock and key , or other means of security . Statement 1017 War n in g Before working on equipme nt that is connected to power line s, remove jewelry (including rings, nec klaces, and wat[...]

9 War n in g T o avoid electric shock, do no t connect safety extra-low voltage (SEL V) circuits to telephone-network volta ge (TNV) circuits. LAN ports contain SE L V c ircuits, and W AN ports contain TNV circuits. Some LAN and W AN ports both use RJ-45 connector s. Use caution when connecting cables. Statement 1021 War n in g This equipment must [...]

10 The brackets for Cisco 2691 routers are shown in Figure 1. Note The slots in the bracke ts marked RIGHT are for securing ca bles with cable ties. Figur e 1 Brac k ets f or Rack-Mounting of Cisco 2691 Rout ers Attaching Brackets Attach the mounting brackets to t he chassi s as shown in Figure 2, Figure 3, Figure 4, or Figure 5, using the screws p[...]

11 Figure 3 Br ack et Installation for Center Mounting with Rear P anel Forwar d Figur e 4 Br ack et Install ation for F r ont Mounting Figure 5 Brac k et Installa tion for Rear Moun ting Installing Chassis in Rack Install the c hassis in t he rack. Rack-m ount ing screws are not provided with the router . Use two screws for each side (supplied wit[...]

12 Installing on Desktop Caution If you place the Cisco router on a desktop, do not place anything that w eighs more than 10 pounds (4.5 kilograms) on top of the chassis. Grounding the Chassis Y ou must connect the chassis to a reliable earth ground; the g round wire must be installed in accordance with local electrical safety standards. • For NE[...]

13 4 Connect Cables War n in g Do not work on the sy stem, or connect or disconnect cables during period s of lightning activity . Statement 1001 System Manageme nt Connections The conn ections described in T able 1 provide system management access. Power Connections War n in g Read the installation instru ctions before connecting the sy stem to th[...]

14 Caution If you connect dual DC power sources, both sources must be the same polarity . Do not connect a –DC with a +DC source to a Cisco 2691 router . Opposite-polarity sources dama ge the power supply . DC Wiring Requirements A Cisco 2691 router with a DC-input power supply requires co pper wire for the pow er connect ions. T able 2 summarize[...]

15 War n in g The illustration shows the DC po wer supply terminal block. Wire the DC power supply as illustrated. The proper wiring sequence is ground to grou nd, positive to positive, an d neg ative to negative. The ground wire shou ld alway s be connected first and di sconnected last. Statement 239 War n in g An exposed wire lead from a DC-input[...]

16 WAN, LAN, and Voice Connections The connections and cables listed here are described in detail in the following documents: • Cisco 2600 Series Hardware Instal lation Guide • Cisco Network Modules Hardware Installation Guide • Cisco Interfa ce Cards In stallation Guid e • Cisco Modular Access Router Cable Specifications T o locate these d[...]

17 5 Power Up the Router Checklist for Power-Up Y ou are ready to power up the Cisco router after the following steps are completed: • Chassis is securely mounted and grounded. • Power and interface ca ble s are connected. • Y our PC terminal emulation program is configured for 9600 baud, 8 data b its, 1 stop bit, and no parity . • Y ou hav[...]

18 Y ou may see different startup messages: • If you see the following messa ges, the router has booted with a configuration file and is ready for initial configuration using the Cisco Router and Securi ty Device Mana ger (SDM): yourname con0 is now available Press RETURN to get started. See the “Initial Co nfiguration Using Cisco Rou ter and S[...]

19 Initial Configuration Us ing Cisco Router and Se curity Device Manager If the following messages appear at the end of the startup sequenc e, Cisco Router and Securi ty Device Manager (SD M) is installed on your router: yourname con0 is now available Press RETURN to get started. For instructions on configuring your router by using SDM, refer to t[...]

20 Step 3 Enter a host name for the router (this example uses 2691 ): Configuring global parameters: Enter host name [Router]: 2691 Step 4 Enter an ena ble secret password. T his passw ord is enc r ypted (more secure) and cannot be seen when viewing the configuration: The enable secret is a password used to protect access to privileged EXEC and con[...]

21 Step 11 The configuration is di splayed: The following configuration command script was created: hostname 2691 enable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1 enable password xxxxxx line vty 0 4 password xxxxxx snmp-server community public ! no ip routing ! interface FastEthernet0/0 no shutdown media-type 100BaseX half-duplex ip address 172.1.2.3[...]

22 For interface numbering information, see the “Interface Numbering” section on page 22. Step 1 T o proceed w ith manual configuration using the CLI, enter no . Would you like to enter the initial configuration dialog? [yes/no]: no Step 2 Press Return to terminate autoinstall and continue with manual configuration. Would you like to terminate [...]

23 • A WIC in each WIC slot (containing interfaces Se rial 0/0 and Serial 0/1 in physical slot W0, interface Serial 0/ 2 in physical slot W1, and interface BRI 0/0 in ph ysical slot W2) – If physical slot W0 is emp ty and physical slot W1 c ontains a 1-port serial WIC, the in terface number in the WIC is numbered Serial 0/0. – If slot W0 cont[...]

24 To access documentation on Cisco.com: For Cisco 2600 series platform documentation, start on Cisco.com at http://www .cisco.com , and select Products & Services > Routers > Cisco 2600 Series Multiservic e Platforms > T echnical Documentation > Document type > Document . For Cisco IOS software documenta tion, start on Cisco.com[...]

25 10 Documentation Feedback Y ou can send comments about technical documentation to bug-doc@cisco.com. Y ou can s ubmit comme nts by usin g the response card (if present) behind the front cover of your document or by writing to the following address: Cisco Systems Attn: Customer Document Ordering 170 W est T asman Drive San Jose, CA 95134-9883 W e[...]

26 Definitions of Serv ice Request Severity T o ensure th at all service requests ar e reported in a standard format, Cisc o has established severity defini tions. Severity 1 (S1)—Y our network is “down,” or there is a critical impact to your business oper ations. Y ou and Cisco will commit all necessary resources around the clock to re solve[...]

27[...]

Corporate Headquarters Cisco Systems, Inc. 170 W est T asman Dri ve San Jose, CA 95134-1706 USA www .cisco.com T el: 40 8 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems International BV Haarlerb ergpark Haarlerbergw eg 13-19 1101 CH Amsterdam The Neth erlands www-europe.ci sco.com T el: 31 0 20 357 1000 Fax: 31 0[...]