Casio QV-30 инструкция обслуживания

Liquid Crystal Digital Camera QV -30 Owner’s Manual 英 2 Introduction Congratulations upon your selection of the QV-30 Liquid Crystal Digi- tal Camera. The QV-30 comes with its own built-in liquid crystal color monitor that let’s you instantly view the pictures you take. To get the most out of the QV-30, be sure to carefully read this manual a[...]

5 General Precautions Be sure to observe the following important precautions whenever us- ing the QV-30. All references in this manual to “this camera” and “the camera” refer to the CASIO QV-30 Digital Camera. • Never try to take pictures or use the built-in display while operating a motor vehicle or while walking. Doing so creates the da[...]

9 Unpacking Soft case Alkaline batteries (AA-size × 4) Cleaning Cloth Wrist Strap Manual Special video cable Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible. Camera Getting Acquainted 10 General Guide The following illustrations show the names of e[...]

13 Power Supply The camera features a two-way power supply that lets you use either batteries (AA-size Alkaline) or household AC current. To load batteries Be sure that camera power is turned off whenever loading or replac- ing batteries. 1. Slide the battery compartment lock on the bottom of the camera in the direction indicated by arrow 1 1 1 1 1[...]

17 Auto Power Off Power automatically turns off whenever you do not perform any cam- era operation for a period of time. Power turns off after about two minutes in the Record Mode or after about five minutes in the Play- back Mode. • To restore power, simply slide the POWER switch to the right as you normally do. Power Supply Important! The Auto [...]

21 Recording Images 4. Record the image. • Compose the image you want to record while viewing it on the LCD. • It is best to look at the LCD di- rectly, and not from an angle. • Take care that your finger is not blocking the lens. • Should the lens become dirty, use the cloth that comes with the cam- era to clean it off. • When the image [...]

25 Recording Images NORMAL/MACRO Switch The NORMAL/MACRO switch tells the camera how much distance there will be between the lens and the object whose im- age you are recording. The following table describes the conditions covered by each switch setting. Switching Between Lenses This camera gives you a choice between telephoto (TELE) and wide-angle[...]

29 Recording Images • The image number appears in the upper right corner of the LCD. It indicates the number of the next image that will be re- corded. The number 21, for ex- ample, indicates that there are 20 images in memory, and the next image will be number 21. • To clear the image number from the LCD, press the DISP button again. Note • [...]

33 Playing Back Images Playing Back Images This section describes how to recall and view images stored in cam- era memory. Displaying Images on the Camera’s LCD The camera can store up to 96 images in memory. Images are se- quentially numbered from 1 through 96. Think of camera memory like a 96-page album of the images you record. The following p[...]

37 Playing Back Images Producing a Multi-Page Display Four or nine memory pages can be displayed at the same time. This feature can be used to display multiple memory pages on the camera’s built-in LCD, or on the screen of a connected TV. 1. Enter the Playback Mode and turn on the camera. 2. Switch to multi-page display. • Press the MODE button[...]

41 Playing Back Images Using the Zoom Function This function lets you select a specific part of a stored image and enlarge it to twice its normal size. 1. Display an image. 2. Press the ZOOM button to zoom in on the center of the im- age. • The center of the image is enlarged to twice its normal size. 3. Change the position of the zoom area. • [...]

45 Playing Back Images 1. Perform steps 1 and 2 under “To start the auto play opera- tion” on page 43 to start auto play. 2. Press MODE to enter the Auto Play Setting Mode. • Be sure to press MODE while an image is stopped on the monitor, and not while images are changing. 3. Use [+] (increase) and [–] (decrease) to change the current speed[...]

49 Playing Back Images Hiding Protected Memory Pages This function makes it possible for you to hide protected memory pages so their images do not appear on the monitor during playback. To hide protected memory pages While holding down the [+] button, turn on the camera. Important! • You cannot protect or unprotect pages (pages 46~48) while pro- [...]

53 Deleting Memory Pages To delete all unprotected memory pages 1. Enter the Playback Mode and turn on the camera. 2. Press DEL. * This screen clears automatically from the display if you do not perform any op- eration for about 30 seconds. 3. Press the [–] button to specify deletion of all unprotected pages. • To abort the delete operation wit[...]

57 The following section provides specific information on how you can use the camera after connecting to various types of devices. In each case, the camera terminal you should connect to is indicated in the title as VIDEO and DIGITAL . Important! • Make sure that the power of all devices is turned off before connect- ing them. • You should also[...]

61 4. Use the [+] and [–] buttons to move the pointer to the receive icon. • As soon as you perform the above step, all of the buttons and con- trols on the other camera become disabled. 5. After you make the setting you want, press the shutter button again. • Pressing the shutter button receives the selected image from the other camera. * Yo[...]

65 Sympton Probable Cause Action All pages do not appear during auto play. Camera is con- nected to a TV, but LCD monitor contents do not appear on TV screen. Some images are missing. Cannot use multi-page dis- play. Cannot protect memory pages. Protected memory pages are hidden. 1. Function switch set to REC 2 . Incorrect camera-TV connection 3. W[...]

69 Specifications General Recording System ... Digital (JPEG based)/Field recording Signal System ......... NTSC Recording Medium .. Built-in 16-Mbit flash memory Number of Pages .... 96 Delete Functions ..... Single page; All pages (with page protect feature) Imaging Device ....... 1/5-inch CCD (Total Number of Pixels: 250,000) Lens ..............[...]