Casio CTK-3000 инструкция обслуживания

1 Part I MIDI Message Overview 1 Product Conf iguration as a MIDI Device ............. ................. ................ ................ ................ .......... .. 3 1.1 Performance Controller Sect ion . .............. ......... .. ............ .............. ........... ........... .............. ........... ....... 3 1.2 Sound Generator Sec[...]

2 9.13 All Sound Off (78H) ............... .......................................... .............. ................................. .............. ..... 13 9.14 Reset All Controllers (79H) .......................... ........... ........... ............ .............. ........... ........... ... ........... .. 13 10 Mode Messag e ................[...]

3 Part I MIDI Message Overview 1 Pr oduct Configuration as a MIDI Device In terms of a MIDI device, this Instru ment consists of a Performance Controll er Section and Sound Generator Section. Each of these se ctions can send and receive specific MIDI Messages in accordance with it s function. 1.1 P erf ormance Contr olle r Section The Performance C[...]

4 1.2.2 Instrument Part Block The instrument parts of the sound gene rator can be operated or their settings can be changed with channel messages. The 32 instrument parts of this Instru ment are divided between Group A and Group B, each of which has 16 instrument parts. Only Group B can be controlled by external cha nnel messages. As shown in the f[...]

5 2 Timbre T ype Specific Operation The sound source operation performed for a receiv ed message depends on the current T imbre T ype value (see "1 1.1 About the T imbre T ype), wh ich is the operatio n mode of each sound generator instrument part. For details, see the explanation for each message. 3 Conditions that Disable Messa g e Send and [...]

6 Part II Channel Message 4 Receive Channel The channel number of the channel messa ge received by each part is shown in th e table under "1.2.2 Instrument Part Block". 5 Send Channel Basically , the MIDI channel of t he channel me ssage sent whe n the Instrume nt is played coi ncides with the MIDI channel of the part being played. Note, [...]

7 8 P ol yphonic Ke y Pressure Format Send This message is not sent by thi s Instrument. Receive This message is not rece ived by this Instrument. 9 Contr ol Chang e Format Send Sent when the Instrument's pedal is operate d or when Instrument settings are changed. Receive Receipt changes the pedal and other perform ance conditions, and In stru[...]

8 9.2 Modulation (01H) Format Send This message is not sent by thi s Instrument. Receive Receipt adds, to the tone being sounded, mod ulation of a depth specified by the value. In the case of a tone that alread y has modulation applied, re ceipt of this message increase s the modulation depth. The modul ation ef fect differs according to the tone b[...]

9 9.5 P an (0AH) Format Note 1: For information about the rela tionship between setting values and send/receive values, see "19.3 Pan Setting V alue T able" in "Part IV Setting V a lues and Send/Receive V alues". Send Sent when auto ac companiment is used. Receive Receipt changes the pan setting of the corresponding part. 9.6 Ex[...]

10 Timbre T ype Specific Operation This operation differs in accordance with the T imbre T ype (see "1 1.1 About the Timbre T ype") setting. • T imbre T ype: Melody Sustain off/on control is perform ed in a ccordance with the value of the rece ived message. • T imbre T ype: Drum The received mess age does not affect sound sour ce oper[...]

11 Send Sent when auto ac companiment is used. Receive Changes Reverb Send. 9.11 NRPN (62H, 63H) Format Send This message is not sent by thi s Instrument. Receive This Instrument does not have a corresponding NRPN message. 9.12 RPN (64H, 65H) Format 9.12.1 Pitch Bend Sensitivity Format Send Sent when the Bend Range is changed on the CTK-3000. Recei[...]

12 9.12.2 Fine T une Format Send This message is not sent by thi s Instrument. Receive Receipt changes Chann el Fine Tune. 9.12.3 Coarse T une Format Send This message is not sent by thi s Instrument. Receive Receipt changes Channel Coarse T une. Does not affect sound source operation when th e T imbre T ype is Drum. 9.12.4 Null Format Send Sent af[...]

13 9.13 All Sound Off (78H) Format Send Sent when Local is se t to OFF on the Instrument. Receive Receipt stops all voi ces that are sounding. 9.14 Reset All Control lers (79H) Format Send Sent when MIDI send related settin gs are changed on the Instrument. Receive Receipt initial izes each performance controller . 10 Mode Message 10.1 All Notes Of[...]

14 10.3 Omni On (7DH) Format Send This message is never sent . Receive Receipt of this message pe rforms the same operation as when Al l Notes Off is receiv ed. 10.4 Mono (7EH) Format Send This message is never sent . Receive Receipt of this message pe rforms the same operation as when Al l Notes Off is receiv ed. 10.5 P oly (7FH) Format Send This [...]

15 Receive Receipt of this message changes the tone of the part that corresponds to the MIDI channel. The selected tone is dete rmined by the program value of this message and the Ba nk Select mess age value rece ived prior to this me ssage. Also note that rece ipt of this message also may change t he Ti mbre T ype that corresponds to the selected [...]

16 Part III System Messages 14 Timing Cloc k Format Send Sent when auto ac companiment is used. Receive This message is not rece ived by this Instrument. 15 Star t Format Send Sent when auto ac companiment is used. Receive This message is not rece ived by this Instrument. 16 Stop Format Send Sent when auto ac companiment is used. Receive This messa[...]

17 Receive Once this message is rec eived, the Active Sensing mode is entered. If no MIDI message is received for a specified amoun t of time, voices being sounded by the Instrument 's sound source are released, the contro ller is reset, and the Active Sensing mode is exited. 18 System Exc l usive Message Format This Instrument sends a nd rece[...]

18 18.1.3 Master Coarse T uning Format Send Sent when T ranspose is changed. Receive Receipt changes the T ranspose paramete r . Does not af fect sound source op eration when the T imbre T ype is Drum. 18.1.4 Reverb Parameter Format Time Format Note 1: For information about the relationship betw een setting values and send/r eceive values, see &quo[...]

19 Send This message is never sent . Receive Receipt changes the sound source se tting to the Instrument presetting. 18.1.6 GS Message Send This message is never sent . Receive Receipt performs the same operation as when the GM System On message is received. Message Format: F0H 41H ddH 42H 12H 40H 00H 7FH 00H 41H F7H Note: dd (Device ID) is ignored[...]

20 Part IV Setting V alues and Send / Receive V alues 19 Setting V alue T ables 19.1 Off/On Setting V alue T able 19.2 -64 - 0 - +63 Setting V alue T able 19.3 P an Setting V alue T able 19.4 -100 - 0 - +99 Setting V alue T able 19.5 Reverb Time Settin g V alue T able Transmit Value Receive Value Parameter 00H 00H - 3FH Off 7FH 40H - 7FH On Transmi[...]

21 Part V MIDI Implementation Notation 20 V alue Notation 20.1 Hexade cimal Notation MIDI implementation sometime s requires that data be expressed in hexadecimal form at. Hexadecimal values are indicated by t he letter "H" afte r the value. The hexadecimal equivalents of decimal values 10 through 15 are expressed as the letters A through[...]

MA0901-A CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan[...]