Canon CDI-E301-010 инструкция обслуживания

CDI-E301-010 XXXXXX © 2006 CANON INC. PRINTED IN JAP AN DPUG13 Direct Print User Guide Y ou don’t even need a computer ! Just connect your camera to your printer and print[...]

ENGLISH Introduction — Confirm Your Printer Model and the Secti on that Applies to You Operations differ according to your printer model. According to the procedure below, confirm the section and page you should read in this user guide. Connect the camer a to the pri nter wit h an appropri ate cable and confir m the icon displ ayed in the camer a[...]

1 * Please also refe r to the user guide that came with your printe r. Depending on the camera model, the screens that will be displayed will vary. Moreover, available settings differ depending on the printer model and the paper size (unavailable settings will not appear in the menu). For details, refer to the user guide that came with your printer[...]

2 Copyright © 2006 Canon Inc. All rights reserve d. For the latest information regarding connections between Canon printers and cameras, please refer to the following URL: http://web.canon.jp/Imaging /BeBit-e.html http://www.canon.com/pictbrid ge/ PictBridge Compliance This camera complies with the industry standar d “PictBridge”*. This allows[...]

3 Table of Contents Direct Prin t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Allows for Printing without th e Use of a Computer . . . . 6 Various Printing Operations Can Be Performed . . . . . . . 6 You Can Also Perform the Following Printing Opera tions . .7 Printing Movies (Movie Print) . . . . . . . . . . . .[...]

4 Printing wi th Bubble J et Printe rs (PIXMA series/ SELPHY DS series) using PictBridge . . . . . . . . . . . . . . . . . 32 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Print after Changing the Print Setting s . . .[...]

5 Printing with Bubble Jet Printers using Bubble Jet Direct . . 71 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Setting the Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Settings that Can Be Set with t he Camera . . . . . . . . . . . . . . . . . 74 SELPHY CP Series Printers using Pic[...]

6 Direct Print Allows for Printing without the Use of a Computer Connect your camera to the printer with the appropriate cable. Image selection and printing is operated from the camera. Various Printing Operations Can Be Performed* Multipl e pictures can be pri nted at once . (DPOF pri nt set ting) Prints to cover the entire surface o f the paper .[...]

7 You Can Also Perform the Fo llowing Printi ng Operation s Printing Movies (Movie Print) 107-J006 6"25 12"50 18"75 1"25 7"50 13"75 20"00 2"50 8"75 15"00 21"25 3"75 10"00 16"25 22"50 5"00 11"25 17"50 23"75 You can print a single frame of movies or extract[...]

8 Connecting the Camera to the Printer Connect the camera to the printer. For instr uctions on printer and camera operation methods, refer to their resp ective user guides. Set one of the following into the camera. • Compact power adapter (sold separately) • Fully charged battery • New batteries Place paper, ink casse tte/cartridge, etc. into[...]

9 Disconnecting the Camera and the Printer Detach the cable from the printer. Pull out the cable while holding the connector plug. Do not pull out by the cable. Turn the camera’s power off. Detach the cable from the camera. Pull out the cable while holding the connector plug. Do not pull out by the cable.[...]

10 Printing Easy Print You can print images by p ressing only one button after connecting the camera to the printer. 1 Make sure tha t displays in the upper left corner of the LCD monitor. 2 Display the images you wis h to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. 11). Prin[...]

11 Print after Changing the Print Settings You can change the print settings before printing. 1 Make sure that displays in the upper left corner of the LCD monitor. If displays on the LCD monitor, please refer to Printing with SELPHY CP Series Printers using Canon Direct Print (p. 53). 2 Display the images you wish to print and press the SET button[...]

12 • You cannot print RAW images. • It may not be possible to play back or print image s shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press the SET button. A confirmation dialog will display. Select [OK] and p[...]

13 Selecting Print Settings Setting the Date and the File Number Printing Option Default S etting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. 1 Select [ ], then select the date and the file number printing optio n[...]

14 Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. Setting the Number of Copies On Uses the camera’s shooting information to deliver optimu m prints. Off Prints without any effects. Default Print settings d iffer a[...]

15 Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 19) before setting th e trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. 1 Select [Trimming] and press the SET button. The trimming frame will appe[...]

16 2a Trim the image. Changing the Size of the Tr imming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Exp[...]

17 2b Trim the image. Changing the Size of the Trimm ing Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the[...]

18 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or d etach the connection cable). • The shooting date or part of the dat[...]

19 Selecting the Paper Settings 1 Select [Paper Settings] and press the SET button. The paper size setting screen appears. 2 Select a paper size and press the SET button. The default settings and specified paper cassette size are displayed. The paper type setting screen appears. * Paper sizes vary according to region. 3 Press the SET button. The pa[...]

20 4 Select a layout. The following layout can be selected. * Card size paper only Default Print settings diff er according to your printer model. Bordered Prints with a border. Borderless Prints right to the ed ges of the paper. N-up Prints 2, 4 or (8 *) images on a single sheet of paper (p. 21) ID Photo Specifies the prin t size and print port io[...]

21 Printing Multiple Images on a Shee t of Paper Selecting [N-up] in the layout setting (p. 20) will allow you to specify the following layout settings. * This option can only be selected when printing on card size pape r. [Printing example 1] Printing 3 copies of image A in 2-up DPOF print setting (p. 28) allows you to separately print different i[...]

22 Printing by Specifying the Print Size (ID Photo Print) Selecting [ID Photo] in the layout setting (p. 20) w ill allow you to specify the print size and print portion of an image or a whole image as an ID photo*. * Images printed with the ID Phot o Print function may not be allo wed as a formal certif icate photo. Refer to the part y (organizatio[...]

23 T Trim the image to specify the print area. See Step 2 of Setting the Printing Area (Trimming) (pp. 16, 17) on how to trim the image. The trimming setting screen differs depending on the camera model. Follow the steps according to the screen that displays on your camera. • The shape of the trimming frame varies depen ding on the specified prin[...]

24 Printing Images in the Fi xed Size Selecting [Fixed Size] in the layout setting (p. 2 0) will allow you to print by specifying the print size of the image on a sheet of paper. Select the fixed print size required. Depending on the paper size, you can select print sizes as follows: 5 Select a layout and press th e SET button. This ends the paper [...]

25 Printing Movies (Movie Print) Single-frame You can choose a single f rame from a movie and print it on a sheet of paper. 1 Select the movie you want to print, then press the SET button. The movie control panel appears. 2 Display the frame you wish to print on the LCD monitor, select (Print), then press the SET button. Refer to Viewing Movies sec[...]

26 Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. 5 Select [Print] and press the SET button. 2 Select (Print) and press the SET button. 3 Select and choose [Sequence]. 4 If necessary, select [On], [Off] or [Default] in (Caption). If you set (Caption) to [On], you can print the file [...]

27 • If you press the button instead of the SET button in Step 1, movie print begins. • The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.) • Card[...]

28 Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory car d. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide . In this section, we will explain h[...]

29 • To print the date, set the [Date] setting in [Set up] on the screen in Step 1 to [On]. You cannot set the date to print in Step 2. • When the print type is set to [Index], the [Date] and [F ile No.] cannot be printed at the same time. • The ID photo print function cannot be use d. • You cannot print movies. • The maximum number of im[...]

30 Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Sele ct [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the SET button. The re maining images can be printed. • Printing canno[...]

31 List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer co nnection. (Depending on the printer model, some messages may not display.) Please refer to the printer’s user guide for solutions. No Paper Paper cassette is incor rectly inserted or out of paper. Or the paper fe[...]

32 Printing Easy Print You can print images by p ressing only one button after connecting the camera to the printer. 1 Make sure that dis plays in the upper left corner of the LCD monitor. 2 Display the images you wis h to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. 33). Prin[...]

33 Print after Changing the Print Settings You can change the print settings before printing. 1 Make sure that displays in the upper left corner of the LCD monitor. If displays on the LCD monitor, please refer to Printing with Bubble Jet Printers using Bubble Jet Direct (p. 71). 2 Display the images you wish to print and press the SET button. The p[...]

34 • You cannot print RAW images. • It may not be possible to play back or print image s shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press the SET button. A confirmation dialog will display. Select [OK] and p[...]

35 Selecting Print Settings Setting the Date and the File Number Printing Option Default S etting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. • On printers equipped with an operation panel, you can change the se[...]

36 Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Impr int mode, [ ] will be set to [Off]. If you se lect [[...]

37 Setting the Number of Cop ies 1 Select [ ] and set the number of prints. 1 to 99 copies can be set.[...]

38 Setting the Printi ng Area (Trimming) You can specify a portion of the image f or printing. Please set [Paper Settings] (p. 42) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings aga in. 1 Select [Trimming] and press the SET button. The trimming frame will ap[...]

39 2a Trim the image. Changing the Size of the Trimm ing Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Exp[...]

40 2b Trim the image. Changing the Size of the Tr imming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the[...]

41 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The shooting date or part of the date[...]

42 Selecting the Paper Settings 1 Select [Paper Settings] and press the SET button. The paper size setting screen appears. 2 Select a paper si ze and press the SET button. The following paper sizes* are available: 4" u 6", 5" u 7", 13 u 18 cm, 8.5" u 11", A4, CreditCard, 8" u 10", 10" u 12", A3, A3+[...]

43 4 Select a layout. The following layout can be selected. * 1 Appears only when using the auto sheet feeder and yo u select [4" × 6"] in [Paper Size]. * 2 Prints the camera name , shooting mode, shutter speed, aperture value, exposure compensat ion, ISO speed, etc., from the Exif informat ion. Bordered Prints with a border. Borderless [...]

44 Printing Multiple Images on a Sheet of Pap er • Selecting [4" x 6"] in the paper size setting (p. 42) will allow you to specify the following layout settings. [Printing example 1] Printing 3 copies of image A in 2-up DPOF print setting (p. 47) allows you to separa tely print differen t images by specifying the number of frames to be [...]

45 5 Select a layout and press the SET button. This ends the paper settings opera tions. The display returns to the print order scree n. • Images will print with borders, even if [Borderless] was sele cted with the camera in the following cases: •When [Plain] is selected in t he camera's [Paper Type] (cannot be selected depending on th e c[...]

46 Printing Movies (Movie Print) You can choose a single frame from a movie and p rint it on a sheet of paper. 1 Select the movie you want to print, then press the SET button. The movie control panel appears. 2 Display the frame you wish to print on the LCD monitor, select (Print), then press the SET button. Refer to Viewing Movies section of the C[...]

47 Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, p lease refer to Setting the DPOF Print Settings section of the Camera User Guid e . In this section, we will explain [...]

48 • To print the date, set the [Date] setting in [Print Settings] on the screen in Step 1 to [On]. You cannot se t the date in Step 2. • When the print type is set to [Index], both the [Date] and [File No.] cannot be printed depending on the printer. • When the print type is set to [Standard], the [File No.] cannot be printed. • You cannot[...]

49 Cancel Printing • Press the SET button to cancel while printing. A confirma tion dialog appears. Select [OK] and press the SET button. The printer will stop printing the curren t image and eject the paper. Restarting Printing • Select [Resume] and press the SET button. The remainin g images can be printed. • Printing cannot be restarted un[...]

50 List of Messages The following messages may appear on the camera LCD monito r if an error occurs during a camera and printer connection. (Depending on the printer, some messages may not appear.) • Please refer to the printer’s user guide for the appropr iate remedies. : Printin g restarts if you select [Continue] and press the SET button. Fo[...]

51 Printer error Disconnect the cable from the prin ter and turn off the printer power. Then reconne ct the cable and turn on the printer. If th e error persists, please request a repair from your nearest Canon Customer Support Center (listed in th e contact list provid ed with the printer). Printer in use The printer is in use now. The printer aut[...]

52 Printing After this step, follow the procedures in the section Printing with Bubble Jet Printers (PIXMA series/ SELPHY DS series) usin g PictBridge (p. 32) to print your images. However, the following menu options cannot be se t. • Print Effect (p. 36): [Vivid], [NR], [Vivid+NR], [Face ], [Red- Eye1], [Red-Eye2] • Paper Size (p. 42): [A3+/13[...]

53 Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. If you use Canon Compact Phot o Printer SELPHY CP730/CP720/CP710/CP510 When printing, on wide-size paper, an image that ha s been shot using a Canon digital camera’s (wide) size, select from [Print Method] on the camera’s (Set up)[...]

54 Print after Changing the Print Settings You can change the print settings before printing. 1 Make sure tha t displays in the upper left corner of the LCD monitor. If displays on the LCD monitor, please refer to Printing with SELPHY CP Series Printers using PictBridge (p. 10). 2 Display the images you wish to print and press the SET button. The p[...]

55 Selecting Print Settings Setting the Number of Cop ies Setting the Print Style (Image , Borders and Date) You can select from among the following print styles. * This option can only be se lected when printing on card size paper. Cancel Printing • You cannot stop printing when printing only one copy of an image. If you are printing more than o[...]

56 1 In the print order sc reen, select [Style] and press the SET button. 2 Select [Image], [Borders], or [Date]. 3 Select settings as needed. 4 Press the MENU button to end the setting selection process. With borderless or multiple prints, the top, bottom and sides of the image may be cropped slightly. If you have not specified a trimming setting,[...]

57 Setting the Printing Area (Trimming) You can specify which portion of an image gets printed. Please set the Print Style (Image, Borders and Date) before setting the trimming settings. If the print style is changed after having made the trimming settings, you must select the settings again. • When printing multiple prints, the [Borders] and the[...]

58 2a Trim the image. Changing the Size of the Tr imming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Exp[...]

59 2b Trim the image. Changing the Size of the Trimm ing Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the[...]

60 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or d etach the connection cable). • The shooting date or part of the dat[...]

61 Printing by Specifying the Print Size (ID Photo Print) You can specify the print size and print portion of an image or a whole image as an ID photo*. * Images printed with the ID Phot o Print function may not be allo wed as a formal certificate pho to. Refer to the party (organiza tion) or administratio n requiring the photo. The print size can [...]

62 3 Trim the image to specify the print area. See Step 2 of Setting the Printing Area (Trimming) (pp. 58, 59) on how to trim the image. The trimming setting screen differs depending on the camera model. Follow the steps according to the screen that displays on your camera. 4 Press the SET button to close the setting menu. 1.4 inch 1 .5 inch 1.8 in[...]

63 • The print size setting only applies to one image . • The print size setting is canceled with the fo llowing operations: • When you set the print size settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The shape of the trimming fra[...]

64 Printing Movies (Movie Print) Single-frame You can choose a single frame from a movie and p rint it on a sheet of paper. 1 Select the movie you want to print, then press the SET button. The movie control panel appears. 2 Display the frame you wish to print on the LCD monitor, select (Print), then press the SET button. Refer to Viewing Movies sec[...]

65 Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. 5 Select [Print] and press the SET button. 2 Select (Print) and press the SET button. 3 Select and choose [Sequence]. 4 If necessary, sele ct [On] or [Off] in (Caption). If you set (Caption) to [On], you can print the file number and[...]

66 • If you press the button instead of the SET button in Step 1, movie print begins. • The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie , there are cases when the number of frames indicated below will not be printed.) • Car[...]

67 Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, p lease refer to Setting the DPOF Print Settings section of the Camera User Guid e . In this section, we will explain [...]

68 • To print the date, set the [Date] setting in [Set up] on the screen in Step 1 to [On]. You cannot se t the date to print with the [Style] menu in Step 2. • When the print type is set to [Index], the [Date] cannot be printed. • When the print type is set to [Standard], the [File No.] cannot be printed. • The ID photo print function cann[...]

69 Printing Errors • An error message appears if an error occur s for some reason during the printing process. Select [Stop] or [Resume] and press the SET button. * The [Resume] option may not appear with some types of errors. In that case, select [Stop].[...]

70 List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, so me messages may not display.) • Please refer to the printer’s user guide for solutions. No Paper Paper cassette is incorrect ly inserted or out of paper. Or the pape[...]

71 Printing After this step, follow the procedures in the section Printing with SELPHY CP Series Printers using Canon Direct Print (p. 53) to print your images. However, please note that so me menus and precautio ns differ, as listed below. See pages 54 and 68. 1 Make sure that displays in the upper left corner of the LCD monitor. If displays, refe[...]

72 See page 55. Setting the Print Style You can select from among the following print styles. Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Sele ct [OK] and press the SET button. The printer will stop printin g the current image and eject the paper. Printing Errors • An error m[...]

73 See page 68. • The ID photo print function cannot be use d. • If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image. • To print the date, set the [Date][...]

74 Settings that Can Be Set with the Camera SELPHY CP Series Printers using PictBridge (When appears on the camera’s LCD monitor during a connection) * This option can only be selected when [ CreditCard] size paper is set. Print Options Selectable with the Camera Date/File No. Date File No . Both Off Default Print Effect Off On Default Number of [...]

75 Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge (When appears on the ca mera’s LCD monitor during a connection) Print Op tions Selectab le with the Cam era Date Date File No. Both Off Default Print Effect Off On Vivid NR Vivid+NR Face Red-Eye1 Red-Eye2 Default Number of Prints 1 to 99 Trimming Movies (Movie Print )[...]

76 * 1 Paper sizes vary according to region. * 2 This option can be specified by selecting [4" x 6"] in [Paper Size]. Paper Settings Paper Size* 1 4" u 6" 13 u 18 cm 5" u 7" A4 8.5" u 11" CreditCard 8" u 10" 10" u 12" A3 A3+/13" u 19" 14" u 17" 4" u 7.1" Defau[...]

77 SELPHY CP Series Printers using Canon Di rect Print Bubble Jet Printers using Bubble Jet Direct (When or appears on the camera’s LCD monitor during a connection) * 1 This option can only be selected when [Cre ditCard] size paper is set. * 2 Paper size will be set au tomatically accordin g to the paper cassette set to the printer. Print Options[...]

78 MEMO[...]

79 MEMO[...]

80 MEMO[...]