Brother DCP4020C инструкция обслуживания

Quick Setup Guide DCP-4020C Before you can use the DCP, you must set up the hardware and install the driver. To help you get started in setting up the mach in e and installin g the driver & software, please read the “Setup Guide” and follow the simple instructions. For the latest driver and to find the best soluti on for your problem or que[...]

Carton components may differ from one country to another. Save all packing materia l s an d the carton. Carton Components Quick Setup Guide CD-ROM User’s Guide Output Paper Support Paper Tray Ink Cartr idges (Black, Cyan, Yellow, Magenta) Power Cord USB Cable ■ You must use the appropriate USB cable. ■ Use only a USB interface cable that is n[...]

1 Table of Contents Setting Up the DCP 1. Removing the Protective Parts ........................................... .............................. 2 2. Attaching the Output Paper Support....................................................... ......... 2 3. Attaching the Paper Tray.....................................................................[...]

2 Setting Up the DCP 1 Remove the protective tape. Do NOT connect the USB cable. Connecting the USB cable is done when installing the driver. 1 Pull the scanner cover release lever to open the scanner cover and lift it to the opening position. 2 Attach the output paper support to the paper output slot. 3 Close the output paper support and the scann[...]

3 Setting Up the DCP Windows ® Mac ® OS 8.6-9.2 Mac ® OS X 10.1/10.2.1 or greater 1 Fan the stack of paper well to avoid paper jams and misfeeds. 2 Unfold the paper support and then press and slide the paper guide to fit the paper width. 3 Gently insert the paper. Make sure the print side is towards you a nd the paper is below the maximum pa per[...]

4 Setting Up the DCP 1 Make sure that the power is turned on. The LCD shows: 2 Pull the scanner cover release lever to open the scanner cover and lift it to the opening position. 3 Lift the output paper support and ink cartridge cover. 4 Remove the yellow plastic protective cartridges. 5 Insert the ink cartridges into the slot for each colour until[...]

5 Setting Up the DCP Windows ® Mac ® OS 8.6-9.2 Mac ® OS X 10.1/10.2.1 or greater • DO NOT shake the ink cartridges. If ink stains your body or clothing, wash with soap or detergent immediately. • Brother multifunction machines are designed to work with ink of a particular specification and work to a level of optimum performance when used wi[...]

6 Setting Up the DCP Step A: Colour Block Quality Check 1 The LCD shows: Check the quality of the four colour blocks formed by the short lines printed on the sheet. (BLACK/CYAN/YELLOW/MAGENTA) 2 If all lines are clear and visible, press the key on the dial pad to go to STEP B: Alignment Check on page 7 . ---OR--- If you can see missing short lines,[...]

7 Setting Up the DCP Windows ® Mac ® OS 8.6-9.2 Mac ® OS X 10.1/10.2.1 or greater You can adjust the LCD contrast for a sharper and more vivid display. If you are having difficulty seein g the LCD from your position, we recommend the following c ontrast settin gs for improved viewing. 1 Press Menu/Set , , . 2 Press to increase the contrast. ---O[...]

8 Installing the Driver & Software You can find a variety of information on the CD-ROM. Install Software You can install p rinter, scanner drive rs and the various utility items, including PaperPort ® , TextBridge ® and PhotoPrinter ® 4. Documentation View the User’s Guide and other docum entation in PDF format. (Viewer includ ed) Brother [...]

9 Setting Up the DCP Windows ® Mac ® OS 8.6-9.2 Mac ® OS X 10.1/10.2.1 or greater Installing the Driver & Software Follow the instructions on this page for your operating system. Step 2 For Windows ® 98/98SE/Me/2000 Professional/XP Users ........... .............................. Go to page 10 For Mac ® OS 8.6 to 9.2 Users ................[...]

10 Installing the Driver & Software Make sure that you have completed the instructions from Step 1 “Setting Up the DCP” on pages 2 to 7. If you are using Windows ® 2000 Professional: To access the PhotoCapture Centre ™ features from your PC you may have to install a Windows ® 2000 update first. Install the Windows ® 2000 update from th[...]

11 6 Click MFL-Pro Suite in Main Application . 7 Click Install . 8 When the PaperPort ® 8.0 SE Setup window is displayed, click Next . 9 After reading and accepting th e License Agreement click Next , then enter your user information. 0 Select Typica l and click Next . A Click Install and Pa perPort ® will start installing on your computer. MFL-P[...]

12 Installing the Driver & Software B When the Registration screen is disp layed, make your selection and follow the on screen instructions. C Click Finish to complete installation. D When the Brother MFL-Pro Suite Installation window appears, click Next . E When Software License Agreement window appears, click Yes . F Select Standard , and th [...]

13 Make sure that you follow ed the instructions in 1 to F on pa ges 10 to 12. G When this screen appears, connect the USB interface to your PC, and then connect it to the DCP. Turn on th e DCP by plugging in the power code. . It will take a few seconds for the installation screen to appear. The installation of the Brother driver will automatically[...]

14 Installing the Driver & Software M Click Finish to restart your compute r. N After the computer restarts, click Yes to have the Control Center loaded each time Windows ® is started. The Con trol Center will appear as an icon in the task tray. If you click No the Scan to key on the DCP will be disabled. The Brother Printer and Scanner driver[...]

15 Make sure that you follow ed the instructions in 1 to F on pa ges 10 to 12. G When this screen appears, connect the USB interface to your PC, and then connect it to the DCP. Turn on th e DCP by plugging in the power code. . It will take a few seconds for the installation screen to appear. The installation of the Brother driver will automatically[...]

16 Installing the Driver & Software Make sure that you follo wed the instructions in 1 to F on pages 10 to 12. G When this screen appears, connect the USB interface to your PC, and then connect it to the DCP. Turn on the DCP by plugging in the power code . . It will take a few seconds for the installation screen to appear. The installati on of [...]

17 1 Insert the supplied CD-ROM into your CD-ROM drive. 2 The CD-ROM main menu will appear. Click Install Software . 3 Click PhotoPrinter ® 4 in t he Optional Applications menu and follow the on-screen instructions to complete the installation. Installing Optional PhotoPrinter ® 4 Software If this window does not appear, use Windows ® Explore to[...]

18 Installing the Driver & Software Make sure that you have completed the instructions from Step 1 “Setting Up the DCP” on pages 2 to 7. 1 Unplug the DCP from the AC outlet and disconnect it from your Macintosh ® if you already connected an interface cable. 2 Turn on your Macintosh ® . 3 Insert the supplied CD-ROM into your CD-ROM drive. [...]

19 9 Click the MFL-Pro Color icon you installed. On the right side of the Choos er , select the printer to which you want to print. Close the Chooser . The Brother Printer and Scanner drivers have been installed a nd the installation is now complete. 1 Insert the supplied CD-ROM into your CD-ROM drive. 2 Double-click the ArcSoft folder. 3 Double-cl[...]

20 Installing the Driver & Software Make sure that you have completed the instructions from Step 1 “Setting Up the DCP” on pages 2 to 7. 1 Unplug the DCP from the AC outlet and disconnect it from your Macintosh ® if you already connected an interface cable. 2 Turn on your Macintosh ® . 3 Insert the supplied CD-ROM into your CD-ROM drive. [...]

21 0 Open the Print Center icon. A Click Add Printer... . B Select USB . C Select DCP-4020C , and then click Add . D Select Quit Print Center from the Print Center menu. The Brother Printer and Scanner d river have been installed and the installation is now complete. 1 Insert the supplied CD-ROM into your CD-ROM drive. 2 Double-click the ArcSoft fo[...]

Trademarks The Brother logo is a regist ered tr ademark of Brother Industries, Ltd. Brother is a registered trademar k of Brother Industries, Ltd. PhotoCapture Centre is registered trademarks of Brothe r Interna tional Corporation. © Copyright 2003 Brother Industrie s, Ltd. All rights re served. Windows and Microsoft are regist ered tra demarks of[...]

UK[...]