Bosch MUM 6622 UC инструкция обслуживания

1 Owner ’ s Manual Universal Series Kitchen Machines for models: MUM 6610 UC • MUM 6622 UC MUM 6630 UC READ THIS MANUAL thoroughly for important safety and operating instructions before using this appliance.[...]

2 IMPORT ANT SAFEGUARDS W ARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal injury or death. When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions before using the kitchen machine. 2. T o protect against risk of ele[...]

3 T ABLE OF CONTENTS IMPORT ANT SAFEGUARDS .................................................................. 2 T able of content s ..................................................................................... 3 ABOUT YOUR KITCHEN MACHINE ....................................................... 4 Bosch Universal Series Kitchen Machine ......[...]

4 ABOUT YOUR KITCHEN MACHINE Congratulations on having selected one of the Bosch Universal Series Kitchen Machines. A series of kitchen machines that we and—thankfully—cooking professionals the world over , feel are the best household- type kitchen machines available. As you read through these instructions, please pay particular attention to th[...]

5 MUM 6610 UC MUM 6630 UC MUM 6622 UC Figure 1[...]

6 Special Accessories T o allow you to get the most service from your Bosch Universal Series Kitchen Machine, Bosch engineers have designed a line of special accessories to expand the usefulness of your machine. In addition to the attachments that come with the various Universal Series Kitchen Machines, there are optional accessories that can be or[...]

7 Integrated hand grips Side recesses molded into each end of the power unit housing provide for easy lifting and carrying of power unit when not in use, see 2e. Four rubber feet Four rubber feet provide the ultimate in stability , while also serving to isolate the power unit from the hard surface to minimize noise and vibration. Figure 2. Getting [...]

8 1. Place power unit on suitable work surface. Before using the machine with any of the attachments, the power unit should be placed on a suitable work surface. The surface should be sturdy , smooth and clean; make sure that there is no flour or oil on the surface. A clean, smooth surface will provide the best footing for the suction cup feet on t[...]

9 9. Work completed, remove attachment. If the attachment is of the continuous feed type or is the batch type and you have completed the work you wished to perform with the attachment, remove the attachment from the power unit per the instructions for the specific attachment being used. 1 0. Place contents (batch-feed type). If the attachment is th[...]

10 surface and switched to the Off position, “O/Off,” and that you have, if necessary , moved the motor drive cover to the drive that will not be used. 1 . Before using the mixing bowl and dough hook for the first time, it is recommended that the bowl, cover , splash ring and dough hook be washed. All components of the mixing bowl and the dough[...]

11 clockwise while pushing down until it stops. 4 . Place the splash ring on the bowl, making sure the tabs on the bowl fit into the recesses in the splash ring, and turn counterclockwise, see figure 5a. Then place the cover on the splash ring so that the tabs on the splash ring fit into the recesses in the bowl cover and turn the cover countercloc[...]

12 OPERA TION WITH DOUGH HOOK AND WHISK ASSEMBL Y Below you will find a table listing examples of how the dough hook and the whisk assembly are to be used for various typical applications. Attachment Ingredients S pe e d Time Max. Amount T win beating Egg whites (2) 3 2 min. 20 eggs whisks (approx.) (approx.) Whipping cream 3 2 min. 6 cups (approx.[...]

13 2. If you have not already done so, move the motor drive cover to the high-speed drive. Place the mixing bowl on the drive of the power unit and turn the bowl counterclockwise with a slight downward pressure until bowl is firmly seated, see figure 4a. CAUTION Failure to make sure that the bowl is properly seated on the drive coupling before the [...]

14 Removing Contents Before beginning to remove the contents from the mixing bowl, make sure that the power unit has been turned to the Off position, “O/Off.” Remove the cover and splash ring by turning clockwise and lifting off. Once the cover and splash ring have been removed, the dough hook or the twin beating whisks may be removed by turnin[...]

15 Figure 9. 2. T o assemble or reassemble blade/base assembly into the blender , insert the blade/base assembly into the blender jar and press down on the blade/base assembly . T urn clockwise to the stop, see figure 1 1. The blade/base assembly is then back in place. Figure 10. 3. If you have not already done so, move the motor drive cover to the[...]

16 Figure 1 1. Placing Blender into Operation Make sure that the switch is in the off position, “O/Off.” Unwind the electrical cord to the necessary length and plug into wall outlet. The blender is now ready for operation. Normally when blending, the blender jar should be filled with the entire amount of material to be blended, if possible, bef[...]