Blaupunkt SYDNEY Sydney RCM 126 инструкция обслуживания

Contents Key Features: ......................................... 4 Codem IV-US Tuner Features:. .............. 4 Audio Features: ...................................... 4 Cassette Features: ................................. 4 DMS CD Changer Control Features: ..... 4 Other Features:. ...................................... 4 Quick reference ..........[...]

,: F& warning for USA The equipment has been tested and found to comply with the limits for a Class B de- vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea- sonable protection against harmful interfer- ence in a residential installation. This equip- ment generates, uses, and can radiate ra- dio frequency energ[...]

Quick reference Audio Features: 35 x 4 Watts Peak Internal Power Dual-Level Fader 4-Channel2.0 V Preamp Out w/75 Ohm Resistance Switchable Auxiliary Input Cassette Features: Soft-Touch, Full-Logic Deck Super CPS Program Search Tape Scan & Blank Skip Dolby B Noise Reduction AutoMetal Tape Equalization DMS CD Changer Control Fea- tures: Controls [...]

Chanaer ooeration (ootional) CD Disc selection >> up << Down Track selection h Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. v Downwards: Press as many times as required. To restart a track: Press briefly. REVIEW -fast reverse (audible): Keep depressed. Extra rocker switch functions: Further setting functions wit[...]

@ PTY (Program Type) In the PTY mode, the preset buttons become program type buttons. With each preset you can select one pro- gram type, such as for example NEWS, SPORT, ROCK, CLASSICL, etc. @ SRC (source) You can switch between the different audio sources radio, tape, and CDC/ AUX (if activated). @ DIS Radio ooeration When an RDS station is recei[...]

Important notes Precautions Before starting to use your new car radio, please read the following information care- fully. Traffic safety As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you. Please keep in mind that you travel a [...]

- ~~ Switching the audio source Displaying the radio pass data Using the “Blau” KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6 . ..) and serial number indicated on the display panel. Please refer to chapter “DSC programming - READ KC”. Optical indication for extra security Turning[...]

RDS Seek (only FM) You can use the << >> buttons to tune in RDS stations. For this it is necessary that the stations have been tuned in at least once and that “AF” is active (lights up in the display). A quick way to tune in RDS stations is to use Travelstore: l Press FMT for two seconds; the sys- tem starts to run through the frequ[...]

Program types Use cc>> to have the last selected program type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1 - 6. Condition: PTY must be active. All of the program types listed below are available. The letters printed in bold are identical to the actual short-time indication in the dis-[...]

Tape operation The car stereo has to be switched on. The unit automatically switches to tape op- eration when a cassette is inserted. Inserting a tape l Turn on the set. l Insert a tape. The tape will be automatically transported to the playback position. Side A or 1 starts to play. During tape operation, “TR 1” or “TR 2” (track) will show [...]

CD changer operation (optional) This car stereo offers you convenient con- Selecting CDs and tracks trol of a Blaupunkt CD changer CDC-A05 or CDC-A071. These changers are sold sep- arately and can be purchased through your Blaupunkt dealer. Switching to CDC operation Make sure that at least one CD has been inserted into the magazine. CD selection P[...]

Proceed as described above for all of the CDs/magazines for which the entered name is to be maintained. l After having updated the last maga- zine, press d. To quit the function, l press DSC. The system has saved the name informa- tion for all of the CDs which were inserted. For all other discs the CD names have been deleted. . . --+ ANGLE BRIGHT S[...]

- S-LO CDC UPD AUX -___~ Appendix To adjust the seek tuning sensitivity for local recep- tion. LO 1 - high sensitivity LO 3 - low sensitivity The seek tuning sensitivity values can be separately set for AM and FM. Use this function to delete CD names during CDC op- eration, in order to have more storage capacity for new discs available. See “Dele[...]

Sydney RCM 126 us Toronto RDM 126 us Fitting instructions Instructions de montage lnstrucciones de montaje Instrqbes de montagem 0 BLAUPUNKT Bosch Group @ Safety notes Before starbng to mount your car radro, read the mountrng and connectron rnstructrons carefully. Drsconnect the vehrcle battery’s negatrve termrnal before making connectrons Be sur[...]

Electrical Connections and Installation G+! !&-#GL To avoid thg aggravation of costly mistakes and serious damage that could make you feel this way, please carefully read all of the instructions before you begin. Carefully follow all instructions. You’ll be glad you did! GENERAL RECOMMENDATIONS AND NOTES l If you’re not confident that you c[...]

Connect the brown “GROUND+” lead to a grounded metal part on the vehicle. We recommend grounding all audio system ground leads (receiver, external amplifier, etc.) to a common grounding point, preferably a non-painted surface under the instrument panel. brown I ground Connect the red lead designated “BATTERY (+12V)” to a source of constant [...]

SPEAKER CONNECTION INSTRUCTIONS The unit’s Dual-Level Fader allows you to fade between the front and the rear channels using either the front and/or rear speaker leads and/or the rear preamp outputs, providing you tremendous flexibility in configuring your speaker arrangement: l You can connect a speaker (regular, co-axial or tri-axial speakers o[...]

A. B. C. D INSTALLATION INSTRUCTIONS This car radio is designed to be installed in the car radio compartment provided by the vehicle manufacturer. Open the car radio compartment (remove the shelf or panel by unclipping it) or adjust the size of the car radio compartment to measure 182 x 53 mm. The mounting bracket included with this car radio is de[...]