Barco PGXG-61B / PGWX-61B / PGWU-61B инструкция обслуживания

PGXG-6 1B / PGWX-6 1B / PGWU-6 1B User manual[...]

Doc. Revision: 00 Barco nv Projection Division Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 Support: www .barco.com/esupport Visit us at the web: www .barco.com[...]

Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and tness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without n[...]

[...]

5 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. SAFETY .................................................................................................................................................................................. 6 1.1 General considerations .......................................................................................[...]

6 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety 1. SAFETY 1.1 General considerations About this chapter Read this chapter attentively . It contains important information to prevent personal injury while installing and using your PRESENT series projector . Furthermore, it includes several cautions to prevent damage to your PRESENT series proj[...]

7 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety Notice on safety This equipment is built in accordance with the requirements of the international safety standards IEC60950-1, EN60950-1, UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information technol - ogy equipment including electrical business equipment. These [...]

8 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety Do not immerse or expose this projector in water or other liquids. y Do not spill liquid of any kind on this projector . y Should any liquid or solid object fall into the cabinet, unplug the set and have it checked by qualied service y personnel before resuming operations. Do not disassemble[...]

9 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety medical attention if unusual health conditions occur after a lamp rupture, explosion, such as headache, fatigue, shortness of breath, chest-tightening coughing or nausea. T o prevent re hazard Do not place ammable or combustible materials near the projector! y Barco large screen projectio[...]

10 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety T o ensure the highest optical performance and resolution, the projection lenses are specially treated with an y anti-reective coating, therefore, avoid touching the lens. T o remove dust on the lens, use a soft dry cloth. Do not use a damp cloth, detergent solution, or thinner . Rated maxi[...]

11 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety T o prevent battery explosion Danger of explosion if battery is incorrectly installed. y Replace only with the same or equivalent type recommended by the manufacturer . (AAA LR03,1.5V) y For disposal of used batteries, always consult federal, state, local and provincial hazardous waste disposa[...]

12 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction 2. INTRODUCTION 2.1 Installation requirements About this chapter Read this chapter before installing PRESENT series projector . It contains important information concerning instal- lation requirements for the PRESENT series projector , such as minimum and maximum allowed ambient tempera [...]

13 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction Projector Power requirements PGXG-61B AC INPUT 100-240V , 6.5A, 50/60Hz PGWX-61B AC INPUT 100-240V , 6.5A, 50/60Hz PGWU-61B AC INPUT 100-240V , 6.5A, 50/60Hz The power cord required to connect the projector with the power net is delivered with the projector . Projector weight Do not unde[...]

14 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction 2.3 Product Overview 2 1 3 4 6 5 2.3.1 Main Unit Component Location Note: The Projection Lens is optional item not a standard accessary in the package. 1 Projection Lens 2 Lamp Cover 3 T ilt-Adjustment Feet 4 Input/Output (I/O) Panel 5 Power Switch 6 Power Socket (AC Input: AC100-240V~, [...]

15 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction 2.3.2 Input/Output (I/O) Panel Component Location 5 2 6 7 4 3 1 8 9 1 Networking Connector RJ45 2 DVI-D Input ConnectorVideo Input Connector 3 BNC Input Connector (YPbPr/RGBHV) 4 +12V Relay Connector 5 Video Input Connector 6 HDMI Connector 7 VGA Connector (PC Analog Signal/Component Vid[...]

16 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction 2.3.3 Remote Control Button Location 8 5 3 4 2 9 10 6 7 1 1 On/Off 2 Home 3 OK 4 Arrow Right 5 Arrow UP 6 Arrow Left 7 Arrow Down 8 LED Indication 9 Battery Compart- ment 10 IR LED’S Basic Remote Command (Result) Remote Lite (Action) Start the projector Press “On/off” 1 T urn off t[...]

17 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.1 RCU Battery Installation 3. INST ALLA TION Overview RCU Battery Installation y Installing the Lens y Connecting the Projector y Powering On/Off the Projector y Adjusting the Projected Image y Ceiling Mount Installation y Remove the cover by sliding it in the direction indicated by th[...]

18 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.2 Installing the Lens T urn the projector off and unplug the power cord. 1. Allow the projector to cool down for at least 1 minute then start the lens 2. replacement. Remove the lens ring cover . 3. 1 Remove the lens cap counterclockwise. 4. 2 Pull the bar to release the lock. 5. 3 Be [...]

19 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.3 Connecting the Projector 3.3.1 Removing the rear cover Procedure Unscrew the three crews on the cover . 1. 1 Lift up and remove the cover . 2. 2 T o install the rear cover , reverse the previous steps. 3. 1 2 Projection Lens P/N R9832755 R9832753 R9832754 R9832756 Lens Type Wide Zoom[...]

20 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 1 3 2 4 5 6 +12V Relay Output Network Port 7 1 Power Cord 2 12V DC Jack 3 RS232 Cable 4 VGA in Cable 5 HDMI Cable 6 Network Cable 7 VGA out Cable 3.3.2 Connecting to a Computer or Laptop Wiring Diagram[...]

21 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.3.3 Connecting to Video Sources Wiring Diagram 3 Video Output 1 2 DVD Player , Set-top Box, HDTV Receiver 5 6 +12V Relay Output 4 1 Power Cord 2 12V DC Jack 3 BNC Cable 4 DVI-D Cable 5 HDMI Cable 6 Composite Video Cable[...]

22 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.4 Powering On/Of f the Projector Ensure that the power cord and signal cable are securely connected. Power on the switch 1.  and the Status LED is solid red. T urn on the lamp by pressing “ 2. ” on the remote control. The Status LED is of f.  The startup screen displays in ap[...]

23 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation Adjusting the Projector ’ s Position 3.5 Adjusting the Projected Image T o determine where to position the projector , consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some ge[...]

24 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation -28% +100% 1 10% 100% 100% -100% 100% 100% +28% Lens Center V ertical Image Offset: +/-100% Horizontal Image Offset: +/-28% Lens Center -28% +100% 1 10% 100% 100% -100% 100% 100% +28%[...]

25 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation Ensure the screws used to attach a mount to the projector meet the following specications: Screw type: M6*10 - Mounting dimension - 3.6 Ceiling Mount Installation 160.00 95.00 241.20 216.20 155.1 1 184.79 Mounting Holes Note: Damage resulting from incorrect installation will void the [...]

26 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1 On-Screen Display Menus 4. USER CONTROLS The projector has On-Screen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. 4.1.1 Using the OSD Lite Menus Main Menu & Buttons Main Menu Basic OSD Lite navigation (Result) Remote Lite (Action[...]

27 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls Main menu is on screen, go to button re - quired (Result) Remote Lite -> OSD Lite (Action -> On Screen) Select input manually 6 4 5 7 3 > 6 4 5 7 go to input desired (default setting = AutoSelect) > 3 Make the image brighter or darker 3 6 4 > 3 default setting= middle Ada[...]

28 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2 Using the Advanced OSD Menus Procedure: Select the Advanced button in OSD Lite Menus then press the sequential key : LEFT > LEFT > 1. RIGHT > DOWN buttons to enter advanced menu. When the advanced OSD displays, use the arrow keys to navigate in the menu and enter to a de [...]

29 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.1 Input Menu Input Select Select the active source, include the following options: HDMI y DVI y VGA y 5BNC y Video y Auto Power Off Switch off after a while when no sync detected. Off: Default value. Disable auto power of f function. y On: Projector will switch off automatically w[...]

30 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.2 Image Menu Brightness Adjust the brightness of the image. Press the ◄ to darken image. y Press the ► to lighten the image. y Contrast Adjust the contrast of the image. Press the ◄ to decrease the contrast. y Press the ► to increase the contrast. y Saturation Adjust the c[...]

31 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls Sharpness Adjust the sharpness of the image. Press the ◄ to decrease the sharpness. y Press the ► to increase the sharpness. y Noise Reduction Reduce temporary and/or spatial noise in the image. Press the ◄ to decrease the noise. y Press the ► to increase the noise. y Color T em[...]

32 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.3 Layout Menu Main Size Set the size of the main window . This function is zoom out/cropping image, the location of image will be kept in center . Press the ◄ to decrease the main size. y Press the ► to increase the main size. y Main Select Select the source for the main windo[...]

33 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.4 Lamps Menu Mode Set lamp mode of the projector . Normal: Default value. When set to normal mode, the wattage of the lamp will be at 330W . y Eco: When set to eco mode, the wattage of the lamp will be at 280W . y Power: Enable lamp power adjust. y High Altitude When “On” is s[...]

34 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.5 Alignment Menu Rear Projection Reverse the image horizontally when the setup is with the projector at the rear of the screen. Off: Default value. Projector is in front projection mode. y On: Projector is in rear projection mode. y Ceiling Mode Reverse the image vertically when t[...]

35 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls Green Weighting of White y Blue Weighting of White y Press the ◄ to decrease the custom color space. y Press the ► to increase the custom color space. y Reset to default: Resets all color points to default value. y Enable Off: Default value. y On: CCN enable. y Auto T est Pattern Of[...]

36 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.6 Control Menu Eco Network Power Switch on/off the network power to save power . Off: Default value. Network is enable in standby . y On: Network is not available in standby . y RS232 Baudrate Select RS232 baudrate. 1 15200: Default value for this function. y 9600/19200: Other opt[...]

37 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.7 Service Menu Model The designated model number of the projector . Serial No The designated serial number of the projector . Soft V ersion The version of software installed on the projector . Main/PIP Source Display the current main and PIP sources. Active Resolution Display the [...]

38 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls Projector Runtime Display the projector ’s total operating hours. Factory Reset Set all persistent settings back to default values. This function will not apply to items including No Signal, Network, Language, Lamp Hours and Projector Hours.[...]

39 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 5. Troubleshooting No image appears on-screen y Ensure all the cables and power connections are correctly and securely connected as described in the “In- - stallation” section. Check if all pins are ok in the connector . - Check if the projection lamp has been securely installed. - Note: This projec[...]

40 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 5. Troubleshooting Image is unstable or ickering y Use “TIMINGSH PHASE” to correct it. - Change the monitor color setting on your computer . - Image has vertical ickering bar y Use “AUTO IMAGE” to make an adjustment. - Check and recongure the display mode of your graphic card to make i[...]

41 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 5. Troubleshooting Message Description Filter Error: When you see the warning message, it means the lter is failed to operate. Overheating: When you see the warning message, it means the tem- perature is over operational temperature. 5.3 W arning Message Note: Please contact service people when you s[...]

42 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 6. Maintenance & Service T urn the projector off and unplug the power cord. 1. Allow the projector to cool down for at least 30 minutes. 2. Unscrew the sixs crews on the cover . 3. 1 Lift up and remove the cover . 4. Unscrew the three screws on the lamp module. 5. 2 Lift up the lamp handle and remov[...]

43 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 6. Maintenance & Service T urn the projector off and unplug the power cord. 1. Allow the projector to cool down for at least 30 minutes. 2. Unscrew the sixscrews on the cover . 3. 1 Lift up and remove the cover . 4. Lift up the air lter slowly and carefully . 5. 2 Clean or replace the air lter[...]

44 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 6. Maintenance & Service T urn the projector off and unplug the power cord. 1. Allow the projector to cool down for at least 1 minute then start the lens 2. replacement. Remove the lens ring cover . 3. 1 Remove the lens cap counterclockwise. 4. 2 Pull the bar to release the lock. 5. 3 Be sure the la[...]

45 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications 7.1 PGXG-61B 7. SPECIFICA TIONS Specications PGXG-61B Projector type single-chip DLP projector T echnology 0.7" DMD Color Wheel 6S standard (RGBYCW) Resolution XGA 1024x768 Brightness* 6750 ANSI lumen Brightness (eco-mode)* 4900 ANSI lumen Contrast ratio 1 100:1 Contrast ratio[...]

46 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications Specications PGXG-61B Optical dowser n/a Advance Picture in Picture Y es Orientation table - ceiling W ARP n/a Integrated web server n/a 3D Y es, TI DLP-Link Keystone Correction Y es Ease of Use Simplied OSD menu + Remote control Inputs G/Y , B/Pb, R/Pr , H/C, V; VGA; CVBS; HDMI[...]

47 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications 7.2 PGWX-61B Specications PGWX-61B Projector type single-chip DLP projector T echnology 0.65" DMD Color Wheel 6S standard (RGBYCW) Resolution WXGA 1280x800 Brightness* 6200 ANSI lumen Brightness (eco-mode)* 4500 ANSI lumen Contrast ratio 1 100:1 Contrast ratio (Dynamic contras[...]

48 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications Specications PGWX-61B Keystone Correction Y es Ease of Use Simplied OSD menu + Remote control Inputs G/Y , B/Pb, R/Pr , H/C, V; VGA; CVBS; HDMI-1 v1.3 ; DVI-D Input Resolutions up to WUXGA (1920x1200) 60Hz Software tools Projection T oolset Control IR; RS232; RJ45 Network connec[...]

49 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications 7.3 PGWU-61B Specications PGWU-61B Projector type single-chip DLP projector T echnology 0.67" DMD Color Wheel 6S standard (RGBYCW) Resolution WUXGA 1920x1200 Brightness* 5900 ANSI lumen Brightness (eco-mode)* 4250 ANSI lumen Contrast ratio 1 100:1 Contrast ratio (Dynamic contr[...]

50 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications Specications PGWU-61B Keystone Correction Y es Ease of Use Simplied OSD menu + Remote control Inputs G/Y , B/Pb, R/Pr , H/C, V; VGA; CVBS; HDMI-1 v1.3 ; DVI-D Input Resolutions up to WUXGA (1920x1200) 60Hz Software tools Projection T oolset Control IR; RS232; RJ45 Network connec[...]

51 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications W ARNING: Be sure to use the correct screw size. Screw size will vary depending on the thickness of the mounting y plate. Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector . y Avoid installing the projector near a heat source. y 364.00 1 12.68 293.[...]

52 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications 7.5 Compatibility Modes Signal Resolution Frequency H. (KHz) V . (Hz) Video Digital Analog Remark NTSC -- 15.734 60 ○ -- -- P AL/SECAM -- 15.625 50 ○ -- -- 640×350 31.5 70.1 -- ○ ○ 70Hz 640×400 37.9 85.1 -- ○ ○ 85Hz VGA 640×480 31.5 60 -- ○ ○ 640×480 67 -- ○ ○ [...]

53 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications Signal Resolution Frequency H. (KHz) V . (Hz) Video Digital Analog Remark HDTV 1920×1080 33.8 30 ○ -- -- 1920×1080 28.1 25 ○ -- -- 1920×1080i 28.125 50 -- ○ ○ 1920×1080i 33.75 60 -- ○ ○ 1920×1080p 24 -- ○ ○ 1920×1080p 25 -- ○ ○ 1920×1080p 30 -- ○ ○ 1920?[...]

54 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 8. Environmental information 8.1 Disposal information 8. ENVIRONMENT AL INFORMA TION Overview Disposal information y RoHS compliance y Disposal Information W aste Electrical and Electronic Equipment This symbol on the product indicates that, under the European Directive 2002/96/EC governing waste from e[...]

55 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 8. Environmental information Hazardous Substances Or Elements / 有毒有害物质或元素 Component Name / 部件名称 Lead (Pb) / 铅 (Pb) Mercury (Hg) / 汞 (Hg) Cadmium (Cd) / 镉 (Cd) Chromium VI Compounds (Cr VI) / 六价铬 (Cr VI) Polybrominated Biphenyls (PBB) / 多溴联苯 (PBB) Polybromina[...]

Production Address No.20, 3rd Ave, Kunshan Free T rade Zone, Jiangsu, P .R. China[...]