Axis Communications P3367VE инструкция обслуживания

AXIS P3367–VE Fixed Dome Network Camera User Manual[...]

About this document This manual is intended for administrators and users of AXIS P3367–VE Fixed Dome Network Camera, and is applicable to rmware 5.60 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-[...]

Japan こ の 装 置 は 、 ク ラ ス B 情 報 技 術 装 置 で す 。 こ の 装 置 は 、 家 庭 環 境 で使 用 す る こ と を 目 的 と し てい ま す が 、 こ の 装 置 が ラ ジ オ やテ レ ビ ジ ョ ン 受 信 機 に 近 接 し て 使用 さ れ る と 、 受 信 障 害 を引 き 起 こ す こ[...]

AXIS P3367–VE Fixed Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

AXIS P3367–VE Fixed Dome Network Camera T able of Contents Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Check the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . .[...]

AXIS P3367–VE Fixed Dome Network Camera Hardware Overview Hardware Overview 7 6 2 1 5 4 3 1 Mounting bracket 2 Unit casing 3 Camera unit 4 Fan output connector 5 Heater . Caution! The heater may be hot. 6 Dome cover 7 W eather shield 2 1 3 4 5 6 7 8 1 Product ID and Serial number (S/N) 2 SD card slot 3 Network connector (P oE) 4 Audio out 5 Netwo[...]

AXIS P3367–VE Fixed Dome Network Camera Hardware Overview Connectors and Buttons For technical specications, see page 65 . Network Connector RJ45 Ethernet connector with P ower over Ethernet (P oE). NO NO NO TICE TICE TICE Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded net[...]

AXIS P3367–VE Fixed Dome Network Camera Hardware Overview LED Indicators LED Color Indication Green Steady for connection to a 1 00 Mbit/s network. Flashes for network activity . Amber Steady for connection to a 10 Mbit/s network. Flashes for network activity . Network Unlit No network connection. Green Steady green for normal operation. Amber St[...]

AXIS P3367–VE Fixed Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating [...]

AXIS P3367–VE Fixed Dome Network Camera Access the Product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must congure your network router to allow incoming data trafc to the product. T o do this, enable the NAT-traversal feature, which will at[...]

AXIS P3367–VE Fixed Dome Network Camera Access the Product Set P ower Line Frequency P ower line frequency is set the rst time the Axis product is accessed and can only be changed from Plain Cong (see page 59 ) or by resetting the product to factory default. Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis p[...]

AXIS P3367–VE Fixed Dome Network Camera Access the Product The product’s fan is controlled by the ambient temperature and is turned on and off automatically . If required, the fan can be activated manually by clicking the Fan button. T o show the button, go to Setup > Live View Cong . Under Action Buttons , select Show fan button and spec[...]

AXIS P3367–VE Fixed Dome Network Camera Access the Product Speaker button — Click to turn the speakers on or off. Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode , the Microphone and T alk buttons must both be active to send audio to the Axis product. Click either button to stop audio transmission. U[...]

AXIS P3367–VE Fixed Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of avai[...]

AXIS P3367–VE Fixed Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • W[...]

AXIS P3367–VE Fixed Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Access Audio Streams Th[...]

AXIS P3367–VE Fixed Dome Network Camera Set Up the Pr oduct Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have acce[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 18 . • Stream proles. See page 20 . • Camera settings. See page 20 . • View areas. See page 23 . • Overlay image. S[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio Pixel Counter The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is a requirement that the image is a certain size, for example in face recognition. The pixel counter can be accessed from: • Video & Audio > Vid[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio more bandwidth for increased activity in the scene, and less for lower scene activity . MBR allows you to set a target bit rate that limits the bandwidth consumption. The MBR target bit rate works like the ceiling of a tent. It limits the bit rate, while maintaining some exibility . The b[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio 1. Go to Setup > Video & Audio > Camera Settings . 2. Select the new capture mode. 3. Click Save . 4. Review and recongure all settings, for example: - View areas - Stream proles - PTZ settings including preset positions and guard tours - Focus windows - Motion detection wind[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio Exposure Settings Congure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidth considerations. Exposure control - This setting is used to adapt to the amount of light used. Automatic is the default setting and can be used in most s[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio Day/Night The IR cut lter prevents infrared (IR) light from reaching the image sensor . In poor lighting conditions, for example at night, or when using an external IR lamp, set the IR cut lter to Off . This increases light sensitivity and allows the product to “see” infrared light[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio To enable overlays: 1. Go to Video & Audio > Video Stream and select the Image tab . 2. T o include an overlay image, select Include overlay image at the coordinates . The overlay image must rst be uploaded to the Axis product, see Overlay Image . 3. T o include date and time, sele[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio 3. T o control the image’s position, enter the X and Y coordinates. The X=0 and Y=0 position is the top left corner . If a part of the image is positioned outside the video image, the overlay image will be moved so that the whole image is visible. 4. Click Save . Use Overlay T ext in an Ac[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio For installation instructions, refer to the product’s Installation Guide. To set focus and zoom: 1. Install the camera as described in the Installation Guide. 2. Go to Video & Audio > Focus & Zoom . 3. On the Basic tab , set the zoom level using the slider . The buttons < and[...]

AXIS P3367–VE Fixed Dome Network Camera Video and Audio The Microphone power option provides DC power for an external microphone. Microphone power should only be used with microphones that have no battery . This setting should not be enabled when using a dynamic or battery powered microphone. To use a professional microphone requiring 48 V phanto[...]

AXIS P3367–VE Fixed Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 20 . • Default Viewer for Browser . See page 28 . • Viewer Setti[...]

AXIS P3367–VE Fixed Dome Network Camera Configure the Live View Page Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or higher . • JRE (J2SE) 5.0[...]

AXIS P3367–VE Fixed Dome Network Camera Configure the Live View Page - Pulse activates the output for a dened period of time. The pulse time can be set from 1/1 00 second to 60 seconds. - Active/Inactive displays two buttons, one or each action. To congure the active and inactive states, go to System Options > P orts & Devices > [...]

AXIS P3367–VE Fixed Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 23 . Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a spe[...]

AXIS P3367–VE Fixed Dome Network Camera PTZ (Pan Tilt Zoom) Guard T our A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and for congurable time periods. The enabled guard tour will keep running after the user has logged off or closed the browser . To add a guard tour: 1.[...]

AXIS P3367–VE Fixed Dome Network Camera PTZ (Pan Tilt Zoom) To disable specic controls, deselect the options under Enable/Disable controls . If using multiple view areas, deselecting a control will only disable the control in the selected view area. Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control [...]

AXIS P3367–VE Fixed Dome Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera T amperi[...]

AXIS P3367–VE Fixed Dome Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up M[...]

AXIS P3367–VE Fixed Dome Network Camera Detectors High level (1 00%) Only very large objects trigger motion detection. An object that appears in the window triggers motion detection for a long time before it is considered as non-moving. Ordinary colored objects on ordinary backgrounds trigger motion detection. Medium level (50%) A large differenc[...]

AXIS P3367–VE Fixed Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applic[...]

AXIS P3367–VE Fixed Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 38[...]

AXIS P3367–VE Fixed Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an[...]

AXIS P3367–VE Fixed Dome Network Camera Events - Day/Night Mode – Trigger the rule when the product switches between day mode (IR cut lter on) and night mode (IR cut lter off). This can for example be used to control an external infrared (IR) light connected to an output port. - Live Stream Accessed – Trigger the rule when any stream is[...]

AXIS P3367–VE Fixed Dome Network Camera Events - Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 43 . Actions Available actions include: • Day/Night Vision Mode – Set day mode (IR cut lter on) or night mode (IR cut lter off). • Output P ort – Activate an I/O port to control an exter[...]

AXIS P3367–VE Fixed Dome Network Camera Events Recipient Use with action Notes Email Send Images Send Notication Send Video Clip An email recipient can contain multiple email addresses. For more information about email recipients, see Set Up Email Recipients on page 42 FTP Send Images Send Video Clip HTTP Send Images Send Notication Send Vi[...]

AXIS P3367–VE Fixed Dome Network Camera Events Create Schedules Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside ofce hours. Use one of the predened schedules or create a new schedule as described below . To create a new schedule: 1. Go to Events > Schedu[...]

AXIS P3367–VE Fixed Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 45 . • To set up action rules, see page 39 . • To access recordings, see Find Recordings on page 44 . • To play recordings, see Play Reco[...]

AXIS P3367–VE Fixed Dome Network Camera Recordings To play a recording, follow these steps: 1. Go to Recordings > List . 2. T o reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the lters. See also Find Recordings on page 44 . 3. Select the recording and click Play . The [...]

AXIS P3367–VE Fixed Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Languag[...]

AXIS P3367–VE Fixed Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that[...]

AXIS P3367–VE Fixed Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via [...]

AXIS P3367–VE Fixed Dome Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1. Create a self-signed certicate as described above.[...]

AXIS P3367–VE Fixed Dome Network Camera System Options Network Basic T CP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled. IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the I[...]

AXIS P3367–VE Fixed Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart the product by disconnecting and reconnect[...]

AXIS P3367–VE Fixed Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the rst part of a fully qualied domain name, for example, myserver is the host name in the fully qualied domain name myserv[...]

AXIS P3367–VE Fixed Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router . The router must also support UPnP TM . • The router has many different names: “NAT router”, “Network router”, “Internet Gateway”, ”Broadband router”, “Broadband sharing device” or “Home rewal[...]

AXIS P3367–VE Fixed Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP . Community names are used to identify groups. AXIS Video MIB (Management Information Base) for video hardware can be u[...]

AXIS P3367–VE Fixed Dome Network Camera System Options Bonjour The Axis product includes support for Bonjour . Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol. Bonjour can be disabled under System Options > Network > Bonjour . Storage SD Card NO NO NO TICE T[...]

AXIS P3367–VE Fixed Dome Network Camera System Options The Axis product can be congured to automatically format SD cards that are inserted into the product. If autoformat is enabled and an SD card is inserted, the product will check if the SD card has the ext4 le system. If the card has a different le system, the card will automatically [...]

AXIS P3367–VE Fixed Dome Network Camera System Options P orts & Devices I/O P orts The Axis product provides one input port and one output port for connection of external devices. For information about how to connect external devices, see Connectors on page 68 . The I/O ports are congured under System Options > P orts & Devices >[...]

AXIS P3367–VE Fixed Dome Network Camera System Options See also T roubleshooting on page 60 . System Overview To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview . Information that can be found here includes rmware version, IP address, network and security settings, event setti[...]

AXIS P3367–VE Fixed Dome Network Camera System Options Plain Cong Plain Cong is for advanced users with experience of Axis product conguration. Most parameters can be set and modied from this page. To open Plain Cong, go to System Options > Advanced > Plain Cong . Axis Support does not provide assistance. Reset to Factory [...]

AXIS P3367–VE Fixed Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular pr[...]

AXIS P3367–VE Fixed Dome Network Camera Troubleshooting Emergency Recovery Procedure If power or network connection is lost during the upgrade, the process fails and the product becomes unresponsive. Flashing red Status indicator indicates a failed upgrade. T o recover the product, follow the steps below . The serial number is found on the produc[...]

AXIS P3367–VE Fixed Dome Network Camera Troubleshooting The IP address has been changed by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed, use AXIS IP Utility or AXIS Camera Management to locate the product on the network. Identify the product using its model or serial number , or by t[...]

AXIS P3367–VE Fixed Dome Network Camera Troubleshooting Lower frame rate than expected See P erformance Considerations on page 69 . Reduce the number of applications running on the client computer . Limit the number of simultaneous viewers. Check with the network administrator that there is enough bandwidth available. Check in the AMC Control P a[...]

AXIS P3367–VE Fixed Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . T o identify the source of the problem, check the System Log under System Options > Support > [...]

AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P3367–VE, 5 MP/HDTV 1 080p, multi-view , vandal resistantance, outdoor Image sensor Progressive scan RGB CMOS 1/3.2'‘ Lens Varifocal, Remote zoom and focus, P-Iris control, IR corrected, Megapixel [...]

AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Users 20 simultaneous users Unlimited number of users using multicast (H.264) Audio streaming Two-way Audio compression AAC LC 8 kHz 32 kbit/s, 16 kHz 64 kbit/s G.7 1 1 PCM 8 kHz 64 kbit/s G.726 ADPCM 8 kHz 32 kbit/s or 24 kbit/s Congurable b[...]

AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Installation, management and maintenance AXIS Camera Management and web-based conguration Firmware upgrades over HTTP or FTP , rmware available on www .axis.com Casing P olycarbonate cover Aluminum inner camera module with encapsulated ele[...]

AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Video management software (not included) AXIS Camera Companion (included), AXIS Camera Station and video management software from Axis’ Application Development P artners (not included). For more information, see www .axis.com/products/video/so[...]

AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications 3. 3 V m a x 50 m A 1 2 3 4 Audio Connector 3.5 mm audio connectors (stereo) 1 2 3 1 Tip 2 Ring 3 Sleeve Audio Input Microphone/Line in Ground Audio Output Line out (mono) Ground SD Card Slot Supports SD cards with up to 64 GB of storage. For best recording performance, use an SDH[...]

AXIS P3367–VE Fixed Dome Network Camera T echnical Specifications • Viewing on poorly performing client computers lowers perceived performance. Frame rate affected. 7 0[...]

User Manual V er . M4.2 AXIS P3367–VE Fixed Dome Network Camera Date: November 20 14 © Axis Communications AB, 20 1 1 - 2014 P art No. 60653[...]