Avaya A200 инструкция обслуживания

Configuration Guide VIEW Certified © Copyright 2007 Avaya, Inc. All rights reserved 21-601645, Issue 1, May 2007 Page 1 Aruba Mobility Controller Configuration and Deployment Guide SpectraLink’s Voice Interope rability for Enterprise Wireless (VIEW) Certifica tion Program is designed to ensure interoperability and high performance between wirele[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 2 Network Topology The following topology was teste d during VIEW Certificati on testing. Deployment Description It is required that v oice users be placed on a separate VLAN (e.g., VLAN 10) an d data users on a separ ate VLAN (e. g., VLAN 25). The voic e and data VLANs reside on the[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 3 Connecting the APs The APs need an IP addres s for communica tion with the m obility con troller. Th e APs can connect to the co ntroller o ver a L2 or L3 networ k. Ensure that DHCP is enabl ed on the subnets the APs are connected to and can ping the Aruba mobility cont roller’s [...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 4 Via the CLI By default, only SSH (Se cure SHell) acce ss to the switch (m obility controller) is permitted. 1. From a mana gement system th at has network connectivity to the switch, c onnect to the switch using SSH: ssh admin@<swi tch IP address> 2. Enter the ad min password[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 5 Initial Setup Before star ting, please ensure that the Polic y En forcement Firewall module license is enabled on the Aruba mo bility controller. Please contac t Aruba Networks for licen ses and installation information. On power-u p, the user i s presented w ith the st artup wizar[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 6 Assigning an IP to the Mobility Controller 1. Connect to the switc h via the CLI. 2. Login with the co nfigured username and password, admin /admin in this example. 3. Type enable at the > prompt. 4. Type the enable password, enable in this example. 5. Type configure terminal at[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 7 SSID Configuration CLI command configuration APs can be con figured usin g the CLI or the Web in terface. E ach AP is i dentified by a unique location co de. The APs can either be confi gur ed per location with unique settin gs using the AP’s unique l ocation cod e or global ly u[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 8 7. Select the AES - CCM option for WPA2-AES-PSK encry ption. 8. Under WPA2 , select th e PSK AES- CCM option . 9. Select PSK Passphrase (alphanumeric) fr om the Format drop-d own list before typing in th e passphrase. 10. Enter the PSK AES Key/Pa ssphrase . 11. Click the A pply but[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 9 Channel and Tx power Channel and Tx power level can be ma nually se t or configured t o be assigned auto matically depending on the RF environment. Please consul t your facility’s RF site surv ey designed for voice to deter mine the corr ect channel, pow e r and data rate setting[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 10 CLI Commands Required Settings Default Settings Description Tx-power <0-4> 0 As per the environment. This need not be set if ARM is enabled. Channel <x> 1 This is the channel assigned to the radio. Need not be set if ARM is enabled. 802.11b/g rates These rates should b[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 11 CLI Commands Required Settings Default Settings Description Short preamble Tested: Enable Recommended: Disable Enable Set the short preamble to disable, to enable long- preamble-only support. CLI command configuration All of the c ommands lis ted in the CL I Comman ds column ab ov[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 12 Web-based configuration 1. Click the Configuration button. 2. In the naviga tion pane , select Radio from th e WLAN sub-menu. 3. Click the 802 . 11b /g tab. 4. For Max Retr ies , enter 2 for voice. 5. Select the Short Preamble check box. 6. For the DTIM period , en ter 3 . 7. For [...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 13 11. Click the 802.11 a tab. 12. For Max Retries , enter 2 fo r voice. 13. For the DTIM period , enter 3 . 14. For Basic Rates and Supp orted Rates, consult the facilities RF site su rvey to dete rmine if coverage is suffi cient to supp ort all data ra tes. 15. To assign the pow er[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 14 Dynamic RF Management - ARM Aware Scanning If Adaptive Radio Re source Management ( ARM) Aw are Scanning (RF scanning) is included in your firmwa re releas e, it can b e enabled through th e command line inte rface as follows: configure terminal ap location x.y.z phy-type g arm sc[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 15 Create an alias for the AVPP 1. Click the Configuration tab. 2. In the naviga tion pane , select Advanced from the Se curity sub-menu. 3. Click the Destinations tab. 4. To add a new destination, click the Add button. 5. Create a new net-destina tion at Destination Name (e.g . avpp[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 16 Assign policies to the role Create a role, fo r example phones , and assign the policies to this ro le. This is the role that will be assigned t o the handset s when they a re authen ticated succ essfully. The Security Polici es and QoS can also be c onfigured through the command [...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 17 user-role phones session-acl phone_acl ! Authentication In addition to th e encryption, it is re commende d that you use MAC authenti cation to authentica te the wirel ess IP teleph ones. On th e Aruba System , the roles fo r wireless IP telephones ar e derived usin g MAC-authenti[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 18 Ensure that both switches have IP connectivity. A simple ping from each of t he switches to the other switch can be used to verify connectivit y. In a master local setup all AP, authenticat ion, and firewall co nfigurations will be ma de on th e master and pushed down to the local[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 19 Commands for the local sw itch (the Aruba 6000): The AP's IP address must be on same sub-net as the switch. Configure terminal masterip <ip address of the master> interface loopback ip address <ip_addr of the 6000> vlan 1 interface vlan 1 ip address <ip_addr of[...]

Aruba Mobility Controller Configuration Guide VIEW Certified Page 20 Checking the Configuration Verify conn ectivity by pingi ng between the switch es, the AP’ s, and the Av aya Voice Pri ority Processor and Avay a Call Serv er. The switch and AP are now ready for use w ith wireless IP telephon es. To show AP settings : show ap config location x.[...]