Atlona AT-LINE-PRO2 инструкция обслуживания

User Manual CV/SV/PC/HD/HDMI 1080p Scaler Box AT-LINE-PRO2 atlona.com Toll free: 1-877-536-3976 Local: 1-408-962-0515[...]

1. Introduction .................................................. 2 2. Features .................................................. 2 3. Package Contents .................................................. 2 4. Operation Controls and Functions .................................................. 3 4.1 Front Panel ......................................[...]

Atlona Scaler Box is designed to upscale digital/analog video signal from Composite, S-Video, PC, Component (HD) and HDMI input sources, to digital HDMI output of wide-range HDTV and PC resolutions, up to 1080p and WUXGA (1920 x 1200.) Besides video upscaling, the scaler box also converts digital/analog audio signal to digital format, then output e[...]

4.1 Front Panel 1. POWER Button and LED Indicator: Press the button to turn ON/OFF the power of the unit. The LED will illuminate when the power is turned on. 2. IR remote control sensor. 3. Input Selection Buttons and LED Indicators: Press each of the buttons (CV/SV/COMP/PC/HDMI) to select the desired input source. The LED will illuminate when the[...]

4.2. Rear Panel 1. HDMI OUT and CO-AX OUT: Connect the HDMI OUT port to the HDMI input port of your display such as HDTV. Connect the CO-AX OUT port to the Coaxial (S/PDIF) input port of your amplifier for separate digital audio output. 2. AUX IN Input: When the video signal input through the HDMI IN port is from a DVI source such as a PC, use the [...]

4.3. OSD Operation 1st Tier Option 2nd Tier Option Adjustment VIDEO PICTURE MODE USER / STANDARD / VIVID / MOVIE CONTRAST 0 ~ 100 of Contrast Level BRIGHTNESS 0 ~ 100 of Brightness Level HUE 0 ~ 100 of Hue Level SATURATION 0 ~ 100 of Saturation Level SHARPNESS 0 ~ 100 of Sharpness Level SCALE OVERSCAN / UNDERSCAN / LETTERBOX / PANS- CAN / FULL NR L[...]

4.4. Remote Control 1. POWER: Press the button once to power on the AT-LINE-PRO2. Press again to enter standby mode. 2. INPUT: Press the button repeatedly to toggle through various input sources. 3. HD Input: Press the button to directly select component input. 4. PC Input: Press the button to directly select PC input. 5. HDMI/DVI Input: Press the [...]

* The connection between AT-LINE-PRO2 and remote controller with RS-232 modem cable. Pins definition of modem cable AT-LINE-PRO2 Remote Controller PIN Definition PIN Definition 1 NC 1 NC 2 TxD 2 RxD 3 RxD 3 TxD 4 NC 4 NC 5 GND 5 GND 6 NC 6 NC 7 NC 7 NC 8 NC 8 NC 9 NC 9 NC * RS-232 transmission format: Baud Rate: 19200 bps Data Bit: 8 bits Parity: N[...]

(A) Set Commend: Command Code Response Description S POWER 0 > POWER OFF POWER OFF S POWER 1 > POWER ON POWER ON S SOURCE 0 > SOURCE CV CV INPUT S SOURCE 1 > SOURCE SV SV INPUT S SOURCE 2 > SOURCE COMP COMP INPUT S SOURCE 3 > SOURCE PC PC INPUT S SOURCE 4 > SOURCE HDMI HDMI INPUT S OUTPUT 0 > OUTPUT NATIVE NATIVE RESOLUTION [...]

Command Code Response Description S PICTURE MODE 0-3 > PICTUREMODE STANDARD- USER 0:STANDARD; 1 :MOVIE; 2:VIVID; 3:USER, PICTURE MODE OUTPUT S CONTRAST 0-100 > CONTRAST 0-100 CONTRAST 0-100 ADJUST [Defaut:50] S BRIGHTNESS 0-100 > BRIGHTNESS 0-100 BRIGHTNESS 0-100 ADJUST [Defaut:45] S HUE 0-100 > HUE 0-100 HUE 0-100 ADJUST [Defaut:50] S [...]

(B) Status Commend Command Code Response Description R POWER > POWER ON SHOW POWER STATUS R SOURCE > SOURCE CV-HDMI SHOW SOURCE STATUS R OUTPUT > OUTPUT NATIVE-WUXGA SHOW OUTPUT STATUS R SIZE > SIZE FULL-PANSCAN SHOW SIZE STATUS R PICTUREMODE > PICTUREMODE STANDARD-USER SHOW PICTURE MODE STATUS R CONTRAST > CONTRAST 0-100 SHOW CON[...]

6.1. General Specification • Frequency bandwidth: 1.65Gbps (single link) • Input Ports: Composite x 1 / L7R x 1 S-Video x 1 / L/R x 1 Component (3 RCA) x 1 / UR x 1 PC D-Sub (15-pin) x 1 / 3.5mm Phone Jack x 1 HDMI x 1 / 3.5mm Phone Jack x 1 (for DVI) Coaxial (S/PDIF) x 1 • Output Ports: HDMI x 1 Coaxial (S/PDIF)x1 • 5V DC power[...]

Resetting the device to original settings: While the unit is plugged in to the Power Supply: 1. Press and hold the MENU button. 2. Unplug the Power Supply from the backand wait 5 seconds. 3. Plug the Power Supply back in and release the MENU button. 4. The unit should now be reset to its default settings CONNECTION AND INST ALLATION atlona.com Toll[...]

Safeguards Precautions FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly approved by the manufacturer, could void the user’ s authority to operate this equipment. Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the [...]

Atlona, Inc. (“Atlona”) Limited Pr oduct Warranty Policy Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service. Under its Limited Product Warranty, Atlona, at its sole discretion, will either: A) repai[...]

Atlona, Inc Pr oduct Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates. At Atlona we re[...]