ATEN Altusen KL1116L инструкция обслуживания

Hideaw a y TM LCD KVM Switch KL1116 User Manual www .AL TUSEN.com 2005-11-04[...]

Regulatory Information 1. This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are design[...]

User Notice All information, documentation, and sp ecifications contained in this manual are subject to change without prior notification by the manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or fi[...]

Safety Instructions General ! Read all of these instructions. Save them for future reference. ! Follow all warnings and instructions marked on the device. ! Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. ! Do not use the device near water. ! Do not place the device near, [...]

! To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS). ! Position system cables and power cables carefully; Be sure that nothing rests on any cables. ! When connecting or disconnecting power to hot-pluggable power supplies, ob[...]

Rack Mounting ! Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack. ! Always load the rack from the bottom up, [...]

Package Contents Basic Package The basic KL1116 package consists of: ! 1 KL1116 Hideaway ™ LCD KVM Switch with Standard Rack Mounting Kit ! 2 Custom KVM Cable Sets ! 1 Firmware Upgrade Cable ! 1P o w e r C o r d ! 1 User Manual* ! 1 Quick Start Guide ! 1 Registration Card Optional Equipment Depending on any optional equipment that you may have pu[...]

Contents Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . ii User Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Rack Mounting . . . . . . . . . . .[...]

Chapter 3. Basic Operation Opening the Console . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Opening Separately . . . . . . . . . . . . . . . . . . . . . . . . . 16 Opening Together . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . 19 Closing the Console . . . . . .[...]

Chapter 5. Hotkey Operation Hotkey Port Access . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Invoking Hotkey Mode . . . . . . . . . . . . . . . . . . . . . . . 45 Selecting the Active Port . . . . . . . . . . . . . . . . . . . . . . 46 Auto Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Skip Mode . . . . . . . . . . . [...]

About This Manual This User Manual is provided to help you get the most from your KL1116 system. It covers all aspects of installation, configuration and operation. An overview of the information found in the manual is provided below. Overview Chapter 1, Introduction, introduces you to the KL1116 System. Its purpose, features and benefits are prese[...]

Conventions This manual uses the following conventions: Courier Indicates text that you should key in. [ ] Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys need to be chorded , they appear together in the same bracket with a plus sign between them: [Ctrl+Alt]. 1. Numbered lists represent procedures with se[...]

ALTUSEN Information Technical Support North America Technical Phone Support Registered ALTUSEN product owners are entitled to telephone technical support. Call the ALTUSEN Technical Support Center: 949-453-8885. International Technical Phone Support 1. Contact your local dealer. 2. Call the A LTUSEN Technical Support Center: (886-2) 8692-6959. Emai[...]

Notes: 2005-11-04 KL1116 User Manual xiv[...]

Chapter 1. Introduction Overview The KL1116 KVM Switch is a control unit that allows access to multiple computers from a single KVM (keyboard, monitor, and mouse), console. Before the development of the Master View, the only way to control multiple computer configurations from a single console was through a complex and costly network system. Now, w[...]

available, and using the utility to quickly and conveniently perform the upgrade. Setup is fast and easy; plugging cables in to their appropriate ports is all that is entailed. Because the KL1116 intercepts keyboard input directly, there is no software to configure; no need to get involved in complex installation routines; nor any need to be concer[...]

Features ! Integrated KVM console with 15" or 17" LCD monitor - in a Hideaway ™ housing. ! Hideaway ™ housing is slightly less than 1U - with top and bottom clearance for smooth operation in a 1U high system rack. ! LCD Monitor component can slide independently of the keyboard/touchpad component ! Space saving technology - two console[...]

Hardware Requirements Computers The integrated LCD monitor’s maximum resolution is 1024 x 768 (15") or 1280 x 1024 (17"). Make sure that none of the computer resolution settings exceed the LCD monitor’s maximum resolution. Cables Substandard cables may damage the c onnected devices or degrade overall performance. For optimum signal in[...]

KL1116 Front View No. Component Description 1 Upper Handle Pull to slide the LCD module out; push to slide the module in. See item 7 in this table and p. 15 for more details on sliding the console in and out. 2 LCD Display After sliding the LCD module out, flip up the cover to access the LCD monitor. 3 LCD Controls Buttons to control the position a[...]

No. Component Description 4 Port Switches and Port LEDs Press a switch to bring the KVM focus to the computer attached to its corresponding port. See p. 25 for details. Two Port LEDs are built into the Port Switches. The one on the left is the On Line LED; the one on the right is the Selected Port LED: ! An On Line LED lights GREEN to indicate that[...]

KL1116 Rear View No. Component Description 1 Daisy Chain Port When Daisy Chaining Units, the cable plugs in here. 2 CPU Port Section The cables that link to the computers plug in here. Note: The shape of these 15- pin connectors has been specifically modified so t hat only KVM cables designed to work with this switch can plug in (see the Cables sec[...]

Notes: 2005-11-04 KL1116 User Manual 8[...]

Chapter 2. Installation Before you Begin Standard Rack Mounting A standard rack mounting kit is provided with your KL1116. The kit enables the switch to be mounted in rack with a depth of 42 - 77 cm. Note: It takes two people to mount the switch: one to hold it in place; the other to screw it in. Optional mounting kits - including single person Eas[...]

To rack mount the switch, do the following: 1. While one person positions the switch in the rack and holds it in place, the second person - using the screws provided with the rack mounting kit - loosely screws the front brackets to the rack. 2. While the first person still holds th e switch in place, the second person slides the L brackets into the[...]

Single Stage Installation In a Single Stage installation, there are no additional switches daisy chained down from the first unit. To set up a single stage installation, refer to the installation diagram on the next page (the numbers in the diagram correspond to the numbers of the installation steps), and do the following: 1. Plug your external con[...]

1 2 3 4 2 2005-11-04 KL1116 User Manual 12[...]

Daisy Chaining To control even more computers, up to 31 KH0116 units can be daisy chained down from the KL1116. Note: It would be unnecessarily wasteful and expensive to use KL1116 switches for daisy chaining since there is no point in having consoles on the chained switches. Therefore, KH0116 switches are used instead. The KH0116 is similar to the[...]

5. Power up the installation according to the following procedure: a. Power on the First Station (KL1116). Wait a few seconds for the unit to ascertain its Station ID. b. Power up each daisy chained Station on the installation in turn (Sec- ond Station, then Third Station, etc.). Each KH0116 has a LED display on its front panel to indicate its Stat[...]

Chapter 3. Basic Operation Opening the Console The KL1116’s console consists of two modules: An LCD display module located under the top cover; and a keyboard / touchpad module below the LCD module. The modules can either slide together, or independently. This allows you to have the LCD display available for viewing while the keyboard / touchpad [...]

Opening Separately 1. Release the LCD module by pulling the release catch into the handle as you pull the module toward you. 2. Pull the top panel all the way out until it clicks into place. Release Catch 2005-11-04 KL1116 User Manual 16[...]

3. Rotate the top panel all the way back to expose the LCD screen. 4. Reach underneath and pull the keyboard module all the way out until it clicks into place. 2005-11-04 Chapter 3 - Basic Operation 17[...]

Opening Together Refer to the diagrams in the Opening Separately section as you do the following: 1. Release the console by sliding the front panel catches toward the center and as you pull the bottom panel a few centimeters toward you. Once the console has been released, you can let go of the catches. 2. Pull the bottom panel all the way out until[...]

Operating Precautions RIGHT Rest your hands and arms lightly on the keyboard module as you work. WRONG! ! DO NOT lean your body weight on the keyboard module. ! DO NOT place heavy objects on the keyboard module. The maximum load bearing capacity of the keyboard module is 30kg. Failure to heed the information below can result in damage to the keyboa[...]

Closing the Console Closing Separately 1. Pull the release catches located on either side of the keyboard toward you to release the keyboard module, then slide the module slightly in. 2. Let go of the catches. Using the front handle, push the keyboard module all the way in until it clicks into place. 2005-11-04 KL1116 User Manual 20[...]

3. Rotate the LCD module all the way down, then pull and let go of the rear catches to release the LCD module 4. Using the front handle, push the module all the way in until it clicks into place. 2005-11-04 Chapter 3 - Basic Operation 21[...]

Closing Together 1. Rotate the LCD module all the way down, then pull and let go of the rear catches to release the LCD module. (See the diagram on p. 21, step 3.) 2. Using the front handle, push the LCD module all the way in until it clicks into place, ( See the diagram on p. 21, step 4.) 3. There are keyboard module release catches located on the[...]

LCD OSD Configuration The LCD Buttons The LCD OSD allows you to set up and configure the LCD display. Four buttons are used to perform the configuration, as described in the table, below: Button Function MENU ! When you have not entered the L CD OSD Menu function, pressing this button invokes the Menu function, and brings up the Main Menu. ! When y[...]

The Adjustment Settings An explanation of the LCD OSD adjustment settings is given in the table below: Setting Explanation Brightness Adjusts the background black level of the screen image. Contrast Adjusts the foreground white level of the screen image. Phase Adjusts the vertical size of the screen image. Clock Adjusts the horizontal size of the s[...]

Port Selection The KL1116 provides three port selection methods to access the computers on the installation: Manual; OSD (On Screen Display) menus, and Hotkey. OSD Operation is discussed in the next chapter; Hotkey Port Selection is discussed detail in Chapter 5. Manual Port Switching ! Press a switch to bring the KVM focus to the computer attached[...]

Hot Plugging The KL1116 supports hot plugging - components can be removed and added back into the installation by unplugging their cables from the ports without the need to shut the unit down. In order for hot plugging to work properly, however, the procedures described below must be followed: Switching Station Positions You can switch station posi[...]

Powering Off and Restarting If it becomes necessary to Power Off one of the units, unplug its power cable from the rear panel. Before starting it back up you must do the following: 1. Shut down all the computers that are attached to it. Note: You must unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the s[...]

Port ID Numbering Each CPU port on a Master View installation is assigned a unique Port ID. The Port ID is made up of two parts: a Station Number , and a Port Number : ! The Station Number - is a two digit number which reflects the switch’s position in the daisy chain sequence. Note: 1. The first station KL1116 has a Station Number of 01. The fir[...]

Chapter 4. OSD Operation OSD Overview The On Screen Display (OSD) is a menu driven method to handle computer control and switching operations. All procedures start from the OSD Main Screen. To pop up the Main Screen, tap the OSD key (see p. 67), or tap the [Scroll Lock] key twice. Note: You can optionally change the Hotkey to the Ctrl key, in which[...]

When you invoke the OSD, a screen similar to the one below appears: Note: 1. The diagram depicts the Administrator’s Main Screen. The User Main Screen does not show the F4 and F6 functions, since these are reserved for the Administrator and can’t be accessed by ordinary Users. 2. The OSD always starts in List view, with the highlight bar at the[...]

OSD Navigation ! To dismiss the menu, and deactivate the OSD, Click the X at the upper right corner of the OSD Window; or press [Esc] . ! To Logout, Click F8 or the Z Z Z symbol at the top of the Main Screen, or press [F8] . ! To move up or down through the list one line at a time, Click the Up and Down Triangle symbols ( στ ) or use the Up and D[...]

OSD Functions OSD functions are used to configure and control the OSD. For example, you can: rapidly switch to any port; scan selected ports only; limit the list you wish to view; designate a port as a Quick View Port; create or edit a port name; or make OSD setting adjustments. To access an OSD function: 1. Either Click a Function Key field at the[...]

F2 LIST This function lets you broaden or narrow the scope of which ports the OSD displays (lists) on the Main Screen. Many of the OSD functions only operate on the computers currently selected for Listing on the Main Screen with this function. The submenu choices and thei r meanings are given in the table below: Choice Meaning ALL Lists all of the[...]

F3 SET This function allows the Administrator and each User to set up their own, individual, working environment. A separate profile for each is stored by the OSD and is activated according to the Username provided during Login. To change a setting: 1. Double Click it; or move the highlight bar to it, then press [Enter] . 2. After you select an ite[...]

(F3 SET continued) Setting Function PORT ID DISPLAY MODE Selects how the Port ID is displayed: the Port Number alone ( PORT NUMBER ); the Port Name alone ( PORT NAME ); or the Port Number plus the Port Name ( PORT NUMBER + PORT NAME ). The default is PORT NUMBER + P ORT NAME). SCAN DURATION Determines how long the focus dwells on each port as it cy[...]

F4 ADM F4 is an Administrator only function. It allows the Administrator to configure and control the overall operation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter] . After you select an item, a submenu with further choices appears. Double Click the choice you [...]

(F4 ADM continued) Setting Function EDIT PORT NAMES To help remember which computer is attached to a particular port, every port can be given a name. This function allows the Administrator to create, modify, or delete port names. To Edit a port name: 1. Click the port you want, or use the Navigation Keys to move the highlight bar to it, then press [...]

(F4 ADM continued) Setting Function SET QUICK VIEW PORTS This function lets the Administra tor select which Ports to include as Quick View ports. ! To select/deselect a port as a Quick View Port, use the Navigation Keys to move the highlight bar to it, then press the [Spacebar] . ! When a port has been selected as a Quick View Port, an arrowhead di[...]

(F4 ADM continued) Setting Function RESET STATION IDS If you change the position of one of the Stations in the daisy chain, the OSD settings will no longer correspond to the new situation. This function direct s the OSD to rescan the Station positions of the entire installation and updates the OSD so that the OSD Station information corresponds to [...]

F5 SKP This function enables you to easily skip backward or forward - switching the KVM focus from the currently active computer port to the previous or next available one. ! The selection of computers to be available for Skip Mode switching is made with the Scan/Skip Mode setting under the F3 SET function (see p. 35). ! When you are in Skip Mode, [...]

F6 BRC F6 is an Administrator only function. When this function is in effect, commands sent from the console are broadcast to all available computers on the installation. This function is particularly useful for operations that need to be performed on multiple computers, such as performing a system wide shutdown, installing or upgrading software, e[...]

F7 SCAN This function automatically switches among the available computers at regular intervals so that you can monitor their activity without having to take the trouble of switching manually. ! The selection of computers to be included for Auto Scanning is made with the Scan/Skip Mode setting under the F3 SET function (see p. 35). ! The amount of [...]

F8 LOUT Clicking the F8 field or pressing [F8] logs you out of the OSD, and blanks the Console screen. This is different from simply deactivating the OSD when you are at the Main Screen by pressing [Esc]. With this function you must log in all over again to regain access to the OSD, whereas with [Esc] , all you have to do to reenter the OSD is tap [...]

Notes: 2005-11-04 KL1116 User Manual 44[...]

Chapter 5. Hotkey Operation Hotkey Port Access Hotkey Port Access allows you to provide the KVM focus to any computer on your installation directly from the keyboard. The KL1116 provides three hotkey port access features: ! Selecting the Active Port ! Auto Scanning ! Skip Mode Switching Invoking Hotkey Mode All Hotkey operations begin by invoking H[...]

When Hotkey Mode is active: ! The Caps Lock, and Scroll Lock LE Ds flash in succession to indicate so. They stop flashing and revert to normal status when you exit HKM. ! A Command Line appears on the monitor screen. The command line prompt is the word Hotkey: in yellow text on a blue background, and displays the subsequent Hotkey information that [...]

Auto Scanning Auto Scan automatically switches among all the active CPU Ports that are accessible to the currently logged on User at regular intervals, allowing automatic monitoring of computer activity. (See Scan/Skip Mode of the OSD F3 SET function, p. 35 for information regarding accessible ports.) Setting the Scan Interval: The amount of time A[...]

Invoking Auto Scan: To start Auto Scanning, key in the following Hotkey combination: 1. Invoke HKM (see p. 45). 2. Press [A] . When you press A , you automatically exit HKM; enter Auto Scan Mode; and Auto Scanning begins. ! While you are in Auto Scan Mode, you can pause the scanning in order to keep the focus on a particular computer either by pres[...]

Skip Mode This feature allows you to switch between computers in order to monitor them manually. You can dwell on a particular port for as long or as little as you like - as opposed to Auto Scanning, which automatically switches after a fixed interval. To invoke Skip Mode, key in the following Hotkey combination: 1. Invoke HKM (see p. 45). 2. Key i[...]

Hotkey Beeper Control The Beeper can be Hotkey toggled On and Off (see Activate Beeper, p. 37). To toggle the Beeper, key in the following Hotkey combination: 1. Invoke HKM (see p. 45). 2. Press [B] After you press B , the Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you[...]

Hotkey Summary Table [Num Lock] + [-] [Port ID] [Enter] Switches access to the computer that corresponds to that Port ID. [T] [n] [Enter] Sets the Auto Scan interval to n seconds - where n is a number from 1 - 255. [A] Invokes Auto Scan Mode. When Auto Scan Mode is in effect, [P] or Left Click pauses Auto Scanning. When Auto Scanning is paused, pre[...]

Notes: 2005-11-04 KL1116 User Manual 52[...]

Chapter 6. The Firmware Upgrade Utility The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth, automated process for upgrading the KVM switch’s firmware. The Utility comes as part of a Firmware Upgrade Package that is specific for each device. New firmware upgrade packages are posted on our web site as new firmware revision[...]

4. Shut down all of the computers - but not the Stations - on your KVM installation. 5. From your KVM switch console, bring up the OSD (see p. 29) and select the F4 ADM: function. 6 . S c r ol l d ow n to F IR M W AR E UP G R AD E . Press [Enter], then press [Y] to invoke Firmware Upgrade Mode (see p. 39.) For your reference, the current firmware u[...]

Starting the Upgrade To upgrade your firmware: 1. Run the downloaded Firmware Upgrade Package file - either by double clicking the file icon, or by opening a command line and entering the full path to it. The Firmware Upgrade Utility Welcome screen appears: Note: The screens shown in this section are for reference only. The wording and layout of th[...]

3. Click Next to continue. The Firmware Upgrade Utility main screen appears. The devices capable of being upgraded are listed in the Device List panel: 4. As you select devices, a detailed description of each appears in the Device Description panel. 2005-11-04 KL1116 User Manual 56[...]

5. After you have made your device selection(s), Click Next to perform the upgrade. If you enabled Check Firmware Version , the Utility compares the device’s firmware level with that of the upgrade files. If it finds that the device’s version is higher than the upgrade version, it brings up a dialog box informing you of the situation and gives [...]

Upgrade Succeeded After the upgrade has completed, a screen appears to inform you that the procedure was successful: Click Finish to close the Firmware Upgrade Utility. Upgrade Failed If the Upgrade Succeeded screen doesn’t appear, it means that the upgrade failed to complete successfully. See the next section, Firmware Upgrade Recovery , for how[...]

Firmware Upgrade Recovery There are basically three conditions that call for firmware upgrade recovery: ! When you invoke Firmware Upgrade Mode (see p. 54), but decide not to proceed with the upgrade. ! When the Mainboard firmware upgrade fails. ! When the I/O firmware upgrade fails. To perform a firmware upgrade recovery, do the following: 1. Powe[...]

Notes: 2005-11-04 KL1116 User Manual 60[...]

Appendix KL1116 + KH0116 Connection Table The following table indicates the relationship between the number of KL1116/KH0116 units and the number of computers that they control on a daisy chained installation: MVs Computers MVs Computers MVs Computers MVs Computers 1 1 - 16 9 129 - 144 17 257 - 272 25 385 - 400 2 17 - 32 10 145 - 160 18 273 - 288 2[...]

OSD Factory Default Settings The factory default settings are as follows: Setting Default OSD Hotkey [Scroll Lock] [Scroll Lock] Port ID Display Position Upper Left Corner Port ID Display Duration 3 Seconds Port ID Display Mode The Port Number plus the Port Name Scan Duration 5 Seconds Scan/Skip Mode All Screen Blanker 0 (Disabled) Logout Timeout 0[...]

Clear Login Information If you are unable to perform an Administrator login (because the Username and Password information has become corrupted, or you have forgotten it, for example), you can clear the login information with the following procedure: 1. Power off the switch and remove the top cover from the unit chassis. 2. Short the jumper labeled[...]

Optional Rack Mounting For convenience and flexibility, three optional rack mounting kits are available: ! A long bracket standard rack mounting kit for 68.0 - 105.0 cm racks; ! A short bracket Easy-Installation rack mount kit for 54.0 - 70.0 cm racks; ! A long bracket Easy-Installation rack mount kit for 68.0 - 105.0 cm racks. To install the long [...]

2. Attach the left and right easy-installation mounting rails to the inside of the rack. The flange that supports the switch will be to the inside. a. Screw the front flanges to the rack first. b. Slide the bars with the rear flanges toward the rack until the flanges make contact with the rack, then screw the rear flanges to the rack. Rear Attachme[...]

3. Slide the switch onto the support flange s. Use the screws supplied with this package to loosely attach the front of the switch to the front of the rack (only tighten the screws part way). 4. Slide the rear attachment sliding brackets along the slide bars until they contact the rear of the switch, then use the screws supplied with this package t[...]

5. Slide the switch open and closed a couple of times to be sure that it is properly aligned and operating smoothly. (See p. 15 for opening and closing procedures.) 6. After determining that the switch is properly lined up and operating correctly, finish up by fully tightening down the partially tightened front attachment screws inserted in step 3.[...]

Specifications Function Specification Computer Connections Direct 16 Max 512 (via Daisy Chain) Port Selection Push button switches: OSD (On Screen Display); Hotkeys LEDs On Line 16 (Green) Selected 16 (Orange) Power 1 (Blue) Lock 1 x Num Lock (Green) 1 x Caps Lock (Green) 1 x Scroll Lock (Green) Connectors CPU Ports 16 x SPHD-15 F Daisy Chain 1 x D[...]

Troubleshooting Problem Solution There are ghost images on the external monitor. The distance between the ex ternal console and the KL1116 is too great. The maximum VGA cable distance should not exceed 20m and, in some cases, may need to be shorter. R eplace the VGA cable with one of an appropriately short length. 2005-11-04 Appendix 69[...]

Limited Warranty ALTUSEN warrants this product against defects in ma terial or workmanship for a period of one (1) year from the date of purchase. If this product proves to be defective, contact ALTUSEN’s support department for repair or replacement of your unit. ALTUSEN will not issue a refund. Return requests can not be processed without the or[...]

A Activate Beeper . . . . . . . . . . . . . . . 37 ADM . . . . . . . . . . . . . . . . . . . . . . . . 36 Administrator functions . . . . . . . . . 36 Altusen Information . . . . . . . . . . . xiii Authorized Resellers . . . . . . . . . . xiii Auto Scanning . . . . . . . . . . . . . 42, 47 Invoking Auto Scan . . . . . . . . . . 48 Pausing Auto Scan[...]

H Hardware Requirements . . . . . . . . . . 4 Cables. . . . . . . . . . . . . . . . . . . . . . 4 Computer . . . . . . . . . . . . . . . . . . . 4 Hot Plugging . . . . . . . . . . . . . . . . . 26 CPU Ports . . . . . . . . . . . . . . . . . 26 Hotkey Auto scanning . . . . . . . . . . . . . . 47 Beeper Control . . . . . . . . . . . . . . 50 Command [...]

R Rack mounting Optional . . . . . . . . . . . . . . . . . . . 64 Safety information . . . . . . . . . . . vi Standard . . . . . . . . . . . . . . . . . . . . 9 Rear View . . . . . . . . . . . . . . . . . . . . . 7 Reset Station IDs . . . . . . . . . . . . . . 39 Restarting . . . . . . . . . . . . . . . . . . . . 27 Restore Default Values . . . . .[...]