Alamo 60C инструкция обслуживания

©2010 Alamo Group Inc. $0.00 60C Pu bl is h ed 0 1/ 10 Pa rt No . F-4163C OPERA T OR’S MANUAL ALAMO (SMC) 300 East 60th S treet North Sioux Falls, South Dakota 57101 (605) 336-3628 info@alamo-smc.com BACKHOE This Opera tor's Manual is an in tegral part of the safe operation of this machine and must be maintained with the unit at all times. [...]

T O THE OWNER/OPERA T OR/DEALER All implements with moving p arts are potentially hazardou s. There is no substitute for a cautious, safe-minded operator who re cognizes the potential hazards and follows reasonable safety practice s. The manufacturer has designed this implement to be used with all it s safety equipment properly attached to minimize[...]

T ABLE OF CONTENTS SAFETY SECTION ................ ................... ....................... ................... ....................... ............ .............. . 1-1 General Safety Instruct ions and Prac tices ............... ....................... ................... ..................... 1-2 Connecting and Disconnecting Safety Instruction[...]

RIGHT HAND STABI LIZER ...................... .................... ...................... .................... ................. 3-3 OPERATING BACKHOE ....... ...................... .................... ................... ....................... .............. 3-3 FILLING BUCKET ....................... .................... ...................... .[...]

Safety Section 1-1 SAFETY SECTION[...]

SAFETY 60C 01/10 Safety Section 1-2 © 2010 Alamo Group In c. SAFETY General Safety Instructions and Practices A careful operator is the best opera tor . Safety is of primary importance to the manufacturer and sho uld be to the owner/operator . Most accidents ca n be avoided by being aware of your equipment, your surroundings, and observing c ertai[...]

SAFETY 60C 01/10 Safety Section 1-3 © 2010 Alamo Group In c. SAFETY N ever opera t e th e T rac t or or I mp l emen t un til you h ave rea d an d completely under stand this Manual , the T ractor Operator ’ s Manual, and each of the Safety Messages found in the Manual or on the Tr actor and Implement. Learn ho w to stop the tractor engine sudden[...]

SAFETY 60C 01/10 Safety Section 1-4 © 2010 Alamo Group In c. SAFETY Never run the T ractor eng ine in a closed building or without adequate ventilation. The exhaust fumes can be hazardous to your hea lth. (SG-23) Battery posts, ter minals and related accessories cont ain lead and lead compounds, chemicals known to the state of California to cause [...]

SAFETY 60C 01/10 Safety Section 1-5 © 2010 Alamo Group In c. SAFETY Connecting and Disconnecting Safe ty Instructions and Practices U se cau ti on an d wear pro t ec ti ve g l oves w h en h an dli ng s h arp o bj ec t s suc h as bl a d es, knives, and o ther cutting edges. Be alert to wor n component surfaces which h ave sharp edges. Sharp surface[...]

SAFETY 60C 01/10 Safety Section 1-6 © 2010 Alamo Group In c. SAFETY Equipment Operation Safety Instructions and Practices Make sure the hy draulic quick discon nects are fu lly seated into the connections. Do not u se the Backhoe if the hydraulic connection is le aking . Leaking oil coul d allow the Backhoe to fall resulting in a serious crushing [...]

SAFETY 60C 01/10 Safety Section 1-7 © 2010 Alamo Group In c. SAFETY S tart tr actor only when properly seated in the T ractor seat. S tarting a tractor in gear can resu lt in injury or death. Read the T ractor operators manual for prop er starting instructions . (SG-13) Operate this Eq uipment only with a Tractor equipped with an approved roll- ov[...]

SAFETY 60C 01/10 Safety Section 1-8 © 2010 Alamo Group In c. SAFETY Operate the tractor and Backho e only in conditions where you have clear visibility in daylight or with adequate artificial lighting. Never operate in darkness or fogg y conditions where you cannot clearly see at least 100 fe et in front and to the sides of the tractor . Make sure[...]

SAFETY 60C 01/10 Safety Section 1-9 © 2010 Alamo Group In c. SAFETY N ever wa lk or wor k un d er any ra i se d b oom or b uc k e t . Th e B oom cou ld f a ll an d cause serious bodily injury or dea th. Always lowe r the boom and bucket flat on the groun d or support the Boom and bucket on safety stands. Unload all hydraulic actuato rs prior to pe[...]

SAFETY 60C 01/10 Safety Section 1- 10 © 2010 Alamo Group In c. SAFETY Do not work from the backhoe or att achments. Do now allow any riders on the backhoe, tractor or attachments. Falling of f could result in se rious injury . (S BH-34) Use extreme care when digging, transp orting or dumping loads that impair or partially block the operator’s li[...]

SAFETY 60C 01/10 Safety Section 1-11 © 2010 Alamo Group In c. SAFETY T ransporting Safety Inst ructions and Practices BEFORE leaving the tractor sea t, always set the parkin g brake and/or set the tractor transmission in parking ge ar , disengage the PTO, stop the engine, remove the key , and wait for all moving p arts to stop. Place the tractor s[...]

SAFETY 60C 01/10 Safety Section 1- 12 © 2010 Alamo Group In c. SAFETY D o no t d r i ve near th e e d ge o f a dit c h or excava ti on. Th e so il cou ld g i veway resu lti ng i n loss of control or rollover . (SBH-46 ) U se ex t ra care w h en t urn i ng or s t opp i ng. All ow f or i ncrease d l eng th an d we i g ht o f a dd e d backhoe. The ba[...]

SAFETY 60C 01/10 Safety Section 1-13 © 2010 Alamo Group In c. SAFETY Storage Safety Instru ctions and Practices Maintenance Safety Inst ructions and Practices Always look behind you before backing up. Make sure you are looking in the direction of travel. A bystander could walk behind the tractor . Running into a bystande r can result in serious in[...]

SAFETY 60C 01/10 Safety Section 1- 14 © 2010 Alamo Group In c. SAFETY Concluding Safety Inst ructions and Practices Periodically inspect all moving part s for wear and replace when necessary with au thorized service part s. Look for loose fastener s, worn or broken p arts, and leaky or loose fittings. Make sure all pins have cotter pins and washer[...]

SAFETY 60C 01/10 Safety Section 1-15 © 2010 Alamo Group In c. SAFETY Decal Location[...]

SAFETY 60C 01/10 Safety Section 1- 16 © 2010 Alamo Group In c. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 44897 2 DANGER Crushing Haza rd 2. 54687 1 LOGO 60C (Sma ll) 3. 54686 2 LOGO 60C (B ig) 4. NFS 1 SER PL T Serial Plate 5. 38850-2 2 ________ Rivet, Metal Pie rcing (Not Shown) 6. 44909 1 OPERA TIO N Swing Loc k 7. 44908 1 OPERA TIO N Boom [...]

SAFETY 60C 01/10 Safety Section 1-17 © 2010 Alamo Group In c. SAFETY Decal Description 8 -- 44901 9 -- 44900 6 -- 44909 7 -- 44908 3 -- 54686 17 -- 52154 10 -- 4489 9 1 1 -- 44898 2 -- 54687[...]

SAFETY 60C 01/10 Safety Section 1- 18 © 2010 Alamo Group In c. SAFETY 15 -- 4489 6 14 -- 4597 0 16 -- 44895 1 -- 44897 13 -- 44907 12 -- 48280 Note: Safety decal location is listed below each decal. Replace decal if damaged or illegible. Replacement decals are available from dealer .[...]

SAFETY 60C 01/10 Safety Section 1-19 © 2010 Alamo Group In c. SAFETY Federal Laws and Regulations This section is intend ed to explain in broad term s the concept and effect of federal laws an d regulations concerning emplo yer and employee equipment o perat ors. This section is not intended as a legal interpretation of the law and should not be c[...]

[...]

Introduction Section 2-1 INTRODUCTION SECTION[...]

INTRODUCTION 60C 01/10 Introduction Section 2-2 © 2010 Alamo Group Inc. INTRODUCTION Alamo SMC C Series Backhoes are de signed to provide year s of ou tst anding se rvice. C Series Backhoes are designed to fit on a wide ran ge of compact and utility class tractors oper ating in a wide range of conditions. C Series b ackhoes should be mounted to a [...]

INTRODUCTION 60C 01/10 Introduction Section 2-3 © 2010 Alamo Group Inc. INTRODUCTION SPECIFICA TIONS S pecifications may vary depending on tractor model, ti re size and bucket used and are subject to chang e without notification. Tractor must be equipped wit h ROPS and seat belt that will provide greater safety and in stallation of backhoe subfram[...]

INTRODUCTION 60C 01/10 Introduction Section 2-4 © 2010 Alamo Group Inc. INTRODUCTION[...]

Assembly Section 3-1 ASSEMBL Y SECTION[...]

ASSEMBLY 60C 01/10 Assembly Section 3-2 © 2010 Alamo Group Inc. ASSEMBL Y MOUNTING BACKHOE T O TRACTOR 1. Back tractor close enough to backhoe to connect h ose kit or pump to tractor . W ARNING: BE FORE leaving the Powe r Unit Seat, always engage the brake and set the Powe r Unit transmission in parking gear , dise ngage the auxiliary hy draulics,[...]

ASSEMBLY 60C 01/10 Assembly Section 3-3 © 2010 Alamo Group In c. ASSEMBL Y[...]

ASSEMBLY 60C 01/10 Assembly Section 3-4 © 2010 Alamo Group Inc. ASSEMBL Y P ARTS LIST Mainframe Assembly[...]

ASSEMBLY 60C 01/10 Assembly Section 3-5 © 2010 Alamo Group In c. ASSEMBL Y Mainframe Assembly Part s List ITEM P ART NO. QTY DESCRIPTION 1. 54712 1 CONSOLE W/ DECALS 2. 53717 1 COVER PLA TE 3. 54457 2 ST ABILIZER 4. 53707 2 P AD, ST ABILIZER 5. 47272 2 CYLINDER ST ABILIZER 6. 44831 2 BUMPER, RUBBER 7. 54463 2 LOCK ST ABILIZER 8. 41838-100 2 SCREW [...]

ASSEMBLY 60C 01/10 Assembly Section 3-6 © 2010 Alamo Group Inc. ASSEMBL Y Mainframe Assembly w/o Seat[...]

ASSEMBLY 60C 01/10 Assembly Section 3-7 © 2010 Alamo Group In c. ASSEMBL Y Mainframe Assembly w/o Seat Part s List ITEM P ART NO. QTY DESCRIPTION 1. 54712 1 CONSOLE W/ DECALS 2. 53717 1 COVER PLA TE 3. 54457 2 ST ABILIZER 4. 53707 2 P AD, ST ABILIZER 5. 47272 2 CYLINDER ST ABILIZER 6. 44831 2 BUMPER, RUBBER 7. 54463 2 LOCK ST ABILIZER 8. 41838-100[...]

ASSEMBLY 60C 01/10 Assembly Section 3-8 © 2010 Alamo Group Inc. ASSEMBL Y Swing Frame Assembly[...]

ASSEMBLY 60C 01/10 Assembly Section 3-9 © 2010 Alamo Group In c. ASSEMBL Y Swing Frame Assembly ITEM P ART NO. QTY DESCRIPTION 1. 54496 1 CYLINDER, SWING 2. 54448 1 SWING FRAME 3. 41838-28 3 SCREW , CAP 5/16-18 X 2 GR5 4. 41840-3 2 NUT , LOCK 3/8-16 5. 41840-2 3 NUT , LOCK 5/16-18 6. 6075-4 2 FITTING , GREASE 1/4-28 7. 6075-2 2 FITTING , GREASE 1/[...]

ASSEMBLY 60C 01/10 Assembly Section 3-10 © 2010 Alamo Group Inc. ASSEMBL Y Boom Assembly[...]

ASSEMBLY 60C 01/10 Assembly Section 3-11 © 2010 Alamo Group In c. ASSEMBL Y Boom Assembly Part s List ITEM P ART NO. QTY DESCRIPTION 1. 54465 1 BOOM 2. 54489 1 CYLINDER, BOOM 3. 54503 1 CYLINDE R, DIPPERSTICK 4. 47318 2 PIN, 1-1/4 X 6.62 5. 41838-54 2 SCREW , CAP 3/8-16 X 2.50 GR5 6. 41840-3 2 NUT , LOCK3 /8-16 7. 41838-28 1 SCREW , CAP 5/16-18 X [...]

ASSEMBLY 60C 01/10 Assembly Section 3-12 © 2010 Alamo Group Inc. ASSEMBL Y Dipperstick and Bucket Assembly[...]

ASSEMBLY 60C 01/10 Assembly Section 3-13 © 2010 Alamo Group In c. ASSEMBL Y Dipperstick and Bucket Assembly Part s List ITEM P ART NO. QTY DESCRIPTION 1. 54477 1 DIPPERSTICK 2. 54485 1 LINK, BUCKET INNER 4 BAR 3. 54487 1 LINK, GUIDE 4. 54488 1 LINK, GUIDE PLA TE 5. 54510 1 CYLINDER, BUCKET 6. * - BUCKET (2-7644) 9” * - BUCKET (2-7645) 12” * - [...]

ASSEMBLY 60C 01/10 Assembly Section 3-14 © 2010 Alamo Group Inc. ASSEMBL Y V alve Assembly[...]

ASSEMBLY 60C 01/10 Assembly Section 3-15 © 2010 Alamo Group In c. ASSEMBL Y V alve Assembly Parts List ITEM P ART NO. QTY . DESCRIPTION 1. 54361 1 DETENT KIT IN 4TH POSITION 2. 54362 6 ANTISHOCK V AL VE (180 - A BAR) 3. 54363 5 SPOOL RETURN ACTION 4. 54364 1 KIT , PLUG 5. 54365 6 V AL VE, CHECK 6. 54366 1 CONTROL, JOYSTICK 7. 54367 1 PROTECTED LEV[...]

ASSEMBLY 60C 01/10 Assembly Section 3-16 © 2010 Alamo Group Inc. ASSEMBL Y Hydraulic Schematic[...]

ASSEMBLY 60C 01/10 Assembly Section 3-17 © 2010 Alamo Group In c. ASSEMBL Y Hydraulic Schematic Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 53389 1 V AL VE, 2150 PSI 2. 34128-3 6 FITTING , ELBOW 90° 3. 32845-1 6 FITTING , ELBOW 90° 4. 32845-2 2 FITTING , ELBOW 90° 5. 32844-1 18 FITTING , ADAPTER 6. 47879 4 PLA TE, ORIFICE 7. 48282-18 2 HOSE[...]

ASSEMBLY 60C 01/10 Assembly Section 3-18 © 2010 Alamo Group Inc. ASSEMBL Y Seat Assembly[...]

ASSEMBLY 60C 01/10 Assembly Section 3-19 © 2010 Alamo Group In c. ASSEMBL Y Seat Assembly Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 54295 1 SEA T 2. 53713 1 PEDEST AL, LOWER SEA T 3. 53708 1 TUBE, SEA T 4. 5371 1 1 BASE, SEA T 5. 41840-3 4 NUT , LOCK 3/8-16 6. 41838-66 1 SCREW , CAP , 1/2-13 X 3.50 GR5 7. 41840-5 1 NUT , LOCK 1/2-13 8. 41837[...]

ASSEMBLY 60C 01/10 Assembly Section 3-20 © 2010 Alamo Group Inc. ASSEMBL Y Cylinder Assembly - Swing Cylinder Assembly - Swing Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 54497 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5. * 1 RING , BACKUP 6. 44043 1 HEAD, CYLINDER 7. * 1 O-RING 8. 54978 1 PISTON 9. * 1 SEA[...]

ASSEMBLY 60C 01/10 Assembly Section 3-21 © 2010 Alamo Group In c. ASSEMBL Y Cylinder Assembly - Bucket Cylinder Assembly - Bucket Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 5451 1 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5. * 1 RING , BACKUP 6. 41488+ 1 HEAD, CYLINDER 7. * 1 O-RING 8. 35519 1 PISTON 9. * [...]

ASSEMBLY 60C 01/10 Assembly Section 3-22 © 2010 Alamo Group Inc. ASSEMBL Y Cylinder Assembly - Boom Cylinder Assembly - Boom Parts List ITEM P ART NO. QTY . DESCRIPTION 1. 54490 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5. * 1 RING , BACKUP 6. 44043 1 HEAD, CYLINDER 7. * 1 O-RING 8. 44041 1 PISTON 9. * 1 SEAL, [...]

ASSEMBLY 60C 01/10 Assembly Section 3-23 © 2010 Alamo Group In c. ASSEMBL Y Cylinder Assembly - Dipper Cylinder Assembly - Dipper Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 54504 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5. * 1 RING , BACKUP 6. 44043 1 HEAD, CYLINDER 7. * 1 O-RING 8. 44041 1 PISTON 9. * 1 [...]

ASSEMBLY 60C 01/10 Assembly Section 3-24 © 2010 Alamo Group Inc. ASSEMBL Y Cylinder Assembly - St abilizer Cylinder Assembly - St abilizer Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 47268 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5. * 1 RING , BACKUP 6. 41488+ 1 HEAD, CYLINDER 7. * 1 O-RING 8. 35519 1 PIST[...]

Operation Section 4-1 OPERA TION SECTION[...]

OPERATION 60C 01/10 Operation Section 4-2 © 2010 Alamo Group Inc. OPERA TION CAUTION: T o avoid possible inju ry , observe the following safety rules BEFORE OPERA TING backhoe. • Be sure area is clear of underground utilities or other hazards. • Position a barricade around work area. • Keep bystanders a safe distance away . PRE-OPERA TION CH[...]

OPERATION 60C 01/10 Operation Section 4-3 © 2010 Alamo Group Inc. OPERA TION © 2010 Alamo Group Inc. Move dipperstick away and curl bucket by moving lever back and to the right. Move dipperstick away and extend (dump) bucket by moving lever forward and to the right. Move dipperstick toward operator and exten d bucket by moving lever back and to t[...]

OPERATION 60C 01/10 Operation Section 4-4 © 2010 Alamo Group Inc. OPERA TION FILLING BUCKET Control the bucket attitude throughout the diggi ng cycle to keep teeth at the proper angle for best penetrati on. This will minimize dragging and scraping the bucket through the ground. When digging i n hard-packed soil, bucket penetration can be increased[...]

OPERATION 60C 01/10 Operation Section 4-5 © 2010 Alamo Group Inc. OPERA TION © 2010 Alamo Group Inc. Position the unit so the backhoe swin g post is over the center line of the tr ench connection. Dig with the backhoe at extrem e swing positions, and in as close to the stabilizers as possible. Pile the soil on the opposite side of the trenches. P[...]

OPERATION 60C 01/10 Operation Section 4-6 © 2010 Alamo Group Inc. OPERA TION MISCELLANEOUS When finishing straight walls or bell holes in sandy soil, use a platform under the rear tires and stabilizers. The platform distributes the load ove r a larger area and lessens the possibility of a cave-in. The pl atform also tends to keep the unit from cre[...]

OPERATION 60C 01/10 Operation Section 4-7 © 2010 Alamo Group Inc. OPERA TION © 2010 Alamo Group Inc. MOUNTING AND DISMOUNTING BUCKETS Mount buckets using 1 x 6-5/8 anti-rotation pins (1), 5/16 x 2” cap screws (2) and lock nuts (3). PLACING THE ST ABILIZERS Set the stabilizers to remove we ight from the rear wheels. Rear wheels are to remain tou[...]

OPERATION 60C 01/10 Operation Section 4-8 © 2010 Alamo Group Inc. OPERA TION TRANSPORTING THE BACKHOE CAUTION: T o avoid possible injury , observe the following safety rules BEFORE OPERA TING backhoe. • T ravel slowly over rough terrain , on hillsides, and around curves to prevent tipping. • Do not drive tractor nea r the edge of a ditch or ex[...]

Maintenanc e Section 5-1 © 2010 Alamo Group Inc. MAINTENANCE SECTION[...]

MAINTENANCE 60C 01/1 0 Maintenance Section 5-2 © 2010 Alamo Group Inc. MAINTENANCE CYLINDER SERVICE Cylinder are designed to be relia ble and easy to service. If a cylinder should malfunction du ring warranty period, return complete cylinder asse mbly , without disassembl ing, to your authorized service department for instructions. Unauthorized di[...]

MAINTENANCE 60C 01/1 0 Maintenance Section 5-3 © 2010 Alamo Group Inc. MAINTENANCE CAUTION: T o avoid possible inju ry , observe the following safety rule s when servicing backhoe. • Do not oil, grease or adjust backhoe while it is in motion. • Do not change any backhoe relief valve settings. Relief valve settin gs are fa ctory set for best ba[...]

MAINTENANCE 60C 01/1 0 Maintenance Section 5-4 © 2010 Alamo Group Inc. MAINTENANCE BUCKET TOOTH POINTS Bucket tooth points are self -sharpen ing and will require little attention. However , p oints can be replaced when they become badly worn or broken. Remove point from welded tooth shank by ha mmering at “A” on tooth point or by driving a chi[...]

MAINTENANCE 60C 01/1 0 Maintenance Section 5-5 © 2010 Alamo Group Inc. MAINTENANCE HYDRAULIC TROUBLESHOOTING Hydraulic troubleshooting materi al presented in this section is offered as a guide to diagnosing probable cause s and remedies for general operational problems. Match your problem wiht the typical problem examp les given in the possible ca[...]

MAINTENANCE 60C 01/1 0 Maintenance Section 5-6 © 2010 Alamo Group Inc. MAINTENANCE This valve is a precision device and is not inten ded for extensive field adjustment or repair . Fiel d replacement parts are limited to seal kits, cartridges and tie rod ends. Beyond replacement of thes e parts, opening of check cavities and certain relief valve ca[...]

MAINTENANCE 60C 01/1 0 Maintenance Section 5-7 © 2010 Alamo Group Inc. MAINTENANCE V AL VE SERVICE T op of valve is defined as side where joysticks are installed. Before servicing valve, ma ke sure backhoe has b oom locked, stabilizers locked, and dipper in do wn position. Shut off tractor and relieve pressure by activating valve handles. Use a dr[...]

MAINTENANCE 60C 01/1 0 Maintenance Section 5-8 © 2010 Alamo Group Inc. MAINTENANCE[...]

MAINTENANCE 60C 01/1 0 Maintenance Section 5-9 © 2010 Alamo Group Inc. MAINTENANCE P ARTS LIST ITEM DESCRIPTION QTY . NO. 1O - R I N G 1 2O - R I N G 1 3 V AL VE BODY/RELIEF 1 4P I S T O N 1 5S P R I N G 1 6O - R I N G 1 7R E G I S T E R 1 8 NUT , M16-1 .5 1 9D E F L E C T O R 1 10 O-RING 5 1 1 CENTERING RING 5 12 SPRING 5 13 SP ACER 10 14 SCREW 5[...]

MAINTENANCE 60C 01/10 Maintenance Section 5-10 © 2010 Alamo Group Inc. MAINTENANCE PROPER TORQUE FOR F ASTENERS[...]

[...]

ALAMO SMC LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Alamo SMC warrants for one year from the purchase date to t he original non- commercial, governmental, or municipal purchase r (“Purchaser”) and warrants for six months to the original co mmercial or industrial purchaser (“Purchaser”) that the goods purchased are free from defects in [...]

T O THE OWNER/OPERA T OR/DEALER T o keep your implement running efficiently a nd safely , read your manual thoroughly a nd follow these directions and the Safety Messages in this Manual. The T able of Contents clearly ide ntifies each section where you can easily find the informa tion you need. The OCCUP A TIONAL SAFETY AND HEAL TH ACT ( 1928.51 Su[...]

60C-SOM-01/10 P/N F-4163C Printed U.S.A[...]