3D Innovations C11CA18201 инструкция обслуживания

1 400667201D0 Quic k Setup Unpack the Printer Her e’ s how to set up your new EPSON ® printer . . . color ink cartridge paper support black ink cartridge Remove any packing material from the printer , as described on the Notice Sheet in the box. Save all the packaging so you can use it if you need to transport the printer later . Y ou’ll find [...]

Place the printer flat on a stable desk near a grounded outlet. Leave plenty of room in back for the cables and enough room in front for opening the output tray. Do NOT put the printer: ◗ In an area with high temperature or humidity ◗ In direct sunlight or dusty conditions ◗ Near sources of heat or electromagnetic interference, such as loudsp[...]

3 Caution: Do not plug the printer into an outlet controlled by a wall switch or timer , or on the same circuit as a large appliance. This may disrupt the power , which can erase memory and damage the power supply . 1. First make sure the power is off. Check the power button; it’s off when its surface is raised above the printer surface. 2. Plug [...]

4 1. Lower the output tray and raise the printer cover . 2. Press the power button to turn on the printer . The power light flashes, the and ink out lights come on, and the ink cartridge holders move to the installation position. 3. Pull up the ink cartridge clamps. 4. Open the ink cartridge packages. Completely remove the disposable yellow portion[...]

5. Lower the ink cartridges into their holders with the labels face up and the arrows pointing toward the back of the printer . black ink cartridge color ink cartridge Caution: Never turn off the printer when the power light is flashing. If, however , the power light is still flashing after 10 minutes and the printer is not moving or making noise, [...]

6 1. Slide the left edge guide all the way left and pull out the output tray extension. 2. Fan a stack of plain paper and then even the edges. 3. Load the stack with the printable surface face up. Push the paper against the right edge guide. 4. Slide the left edge guide back against the stack of paper . Note: Don’t load paper above the arrow mark[...]

7 1. Turn off the printer . 2. While holding down the load/eject button, turn on the printer . Then release the buttons. 3. A page prints out showing the ROM version and a multicolor nozzle check pattern consisting of staggered horizontal and straight vertical lines. When it’s finished, turn off the printer . If you have any problems with the tes[...]

8 Connecting to a Macintosh 1. Turn off the printer and your Macintosh. 2. Connect one end of the cable to the serial connector on the back of the printer . 3. Connect the other end of the cable to either the printer port or the modem port on your Macintosh. Install the Printer Software Now you need to install the printer software for Windows ® 95[...]

9 Installing on a PC The Windows printer software on the CD-ROM also contains EPSON Answers, a comprehensive online guide that includes: ◗ How T o for step-by-step printer operating instructions ◗ Color Guide with practical color printing information ◗ Problem Solver to help you fix printer problems ◗ T est Print so you can check your print[...]

10 While Running W indo ws 95 1. Make sure Windows 95 is running and the printer is on. Exit any open applications. 2. Insert the EPSON printer software CD-ROM (or diskette 1) in your drive. 3. If Windows 95 launches the install program automatically, you see the EPSON Setup CD window click Next . At the next screen, click the Install icon. If it d[...]

11 Note: If your computer is on a network and you connected the printer to a remote server , you need to set up the printer for network use after installing the printer software. See Chapter 4 of your User’s Guide for instructions. W indo ws 3.1 1. Make sure Windows Program Manager is running and the printer is on. Exit any open applications. 2. [...]

12 Installing on a Macintosh Follow these steps to install the printer software on your Macintosh from the CD-ROM or from diskettes you created or downloaded. (If you install the printer software from diskettes, the Look Y our Best Color Pak Electronic Suite is not installed.) 1. Turn on your Macintosh and turn off any virus protection programs you[...]

13 Selecting Y our Printer After you install the software, you need to select your printer using the Chooser . 1. Open the Chooser from the Apple menu. 2. Click the EPSON Stylus(EX) icon. 3. Click the icon for the port where you connected your printer . (On a PowerBook with a combination printer/ modem port, select the modem port icon.) 4. Turn on [...]

14 Making Macintosh Diskettes from the CD-R OM Before making diskettes from the CD-ROM, name the formatted diskettes you’ll use Disk1 and Disk2 (using a capital “D” and no space before the number). If they’re not named correctly, the diskettes won’t be able to install your software. 1. Turn on the Macintosh and turn off any of its virus p[...]

See Y our EPSON Documentation Y our EPSON Stylus COLOR 600 User’s Guide tells you how to: ◗ print everything from a memo to a glossy photo ◗ use your printer software to fine-tune your printouts ◗ keep your printer working at its best ◗ solve any problems you may have Y ou can also access EPSON’s convenient online help from the printer [...]

16 EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORA TION. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copyright © 1997 by Epson America, Inc. 5/97 Printed on recycled paper with at lea[...]