Xerox 5225 manual

Xerox Multifunction Devices Customer Tips PDL Reference Guide for the WorkCentre 5222/5225/5230 dc08cc0440 October 23, 2008 …for the use r Accessing Extended Features Overview This document enables you to access the extended features of the WorkCentre 5222/5225/5230 in environ ments that do not have a custom print driver. This document applies to[...]

Using this Guide  Search the Feature Table to determine whethe r the feature you wi sh to use is supported.  Verify that the feature is supported by the platfo rm. For example, the WorkCentre must have an option al finisher installed to use stapling comma nds.  Follow across the table to find the syntax lis ted for the PDL exampl es shown.[...]

PCL/PJL Implementation The following table contain s the PCL fea t ure co mmands and shows the syntax require d to use the feature. After the table are examples of how to use the se co mmands and examples of a PCL file. Feature Implementation Values Job Name @PJL SET JOBNAME = " jobname-string " Where jobnam e-string is a maximum of 32 ch[...]

Feature Implementation Values Media Size @PJL SET PAPER = value Where value is one of the following: A3: A3 (297 x 420mm) A4: A4 (210 x 297mm) A5: A5 (180 x 210mm) JISB4: B4 (257 x 364mm) JISB5: B5 (182 x 257mm) STATEMENT: Statement (5.5 x 8.5”) † EXECUTIVE: Executive (7.25 x 10.5”) LETTER: Letter (8.5 x 11”) JISEXEC: 8.5 x 13” LEGAL: Leg[...]

Feature Implementation Values <ESC>&l int A Where int is one of the following: 27: A3 (297 x 420mm) 26: A4 (210 x 297mm) 25: A5 (180 x 210mm) 46: B4 (257 x 364mm) 45: B5 (182 x 257mm) 41: Statement (5.5 x 8.5”) † 1: Executive (7.25 x 10.5”) 2: Letter (8.5 x 11”) 18: 8.5 x 13” 3: Legal (8.5 x 14”) 6: Tabloid (11 x 17”) 81: No[...]

Feature Implementation Values <ESC>&l int H Where int is one of the following: 0 : Feed paper from default tray 4 : Tray1 1 : Tray2 5 : Tray3 8 : Tray4 7 or 20 = Auto 2 or 3 or 6 = Tray5 (Bypass) 21 : Tray6 Output Location @PJL SET OUTBIN = value Where value is one of the following: UPPER : Center output tray (w/o finisher) MAINTRAY : Cen[...]

Feature Implementation Values Booklet @PJL SET JOBATTR = “@BKLT = value1 ” @PJL SET JOBATTR = “@BKSG = value2 ” @PJL SET JOBATTR = “@BKDN = int1 ” Where value1 is one of the followin g: NONEDIVIDE: Compile a booklet as long as the number of sheet does not excee d the limit MANUALDIVIDE: Divide sheets based on the specified limit manuall[...]

Feature Implementation Values <ESC>&l int O Where int is one of the following: 0: Portrait 1: Landscape 2: Reverse Portrait 3: Reverse Landscape Force short edge feeding @PJL SET PAPERDIRECTION = value Where value i s one of the followin g: SEF: Short Edge Feed LEF: Long Edge Feed Job Mode @PJL JOB MODE = value Where value is one of the f[...]

Feature Implementation Values Banner Sheet @PJL SET JOBATTR= "@BANR= value " @PJL SET JOBATTR= "@BCMT= comment string " Where value is one of the following: ST ART : start sheet DEVICE: depend on device setting OFF: no banner sheet Where string is a maximu m of 255 characters (ASCII characters in the range 20h - 7E h are allowed[...]

Example 3 Finishing Options (Punch) <ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET OUTBIN=OUTPIN101<CR><LF> @PJL SET FINISH=ON<CR><LF> @PJL SET PUNCH=LEFT<CR><LF> @PJL SET JOBATTR="@PNHN=TWO"<CR><LF> Example 4 Finishing Options (S addle stapling an d folding) It is an [...]

Example 8 Confidential (Secu re) Print without encryption Password : 1234 <ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET HOLD=STORE <CR><LF> @PJL SET HOLDKEY="1234"<CR><LF> @PJL SET USERNAME="John" <CR><LF> @PJL SET JOBNAME="Job1" <CR><LF> Example 9[...]

PCL/PJL Feature Dependencies/Caveats  All PJL commands must be in t he first 2,500 bytes of the job.  To combine printer escape comm ands (not including PJL comma nd s): The first two characters afte r the <esc> MUST be the s ame. All alpha characters MUST be lowercase, except the final terminatin g character. The commands are read left[...]

dc08cc0440 Font Name PCL Escape Command Courier <esc>(<esc>(s1p 12v0s0b4099T Courier Bold <esc>(<esc>(s1p12v0s3b 4 099T Courier Italic <esc>(<esc>(s1p12v1s0b 4 099T Courier Bold Italic <esc>(<esc>(s1p12v1s3b 4 099T Garamond Antiqua <esc>(<esc>(s1p12v0s0b 4 197T Garamond Halbfett <esc>[...]

Font Name PCL Escape Command ITC Bookman Light <esc>(<esc>(s1p12v0 s-3b24623T ITC Bookman Light Italic <esc>(<esc>(s1p12v1s-3b24623T ITC Bookman Demi <esc>(<esc>(s1p12v0s2b 24623T ITC Bookman Demi Italic <esc>(<esc>(s1p12v1s2b 24623T Helvetica Narrow <esc>(<esc>(s1p12v4s0b 24580T Helvetica[...]

dc08cc0440 Customer Support Page 15 PostScript This WorkCe ntre support s PS 3 commands that enable the features listed in the followin g table. Feature Description Media Size This command specifies the size of media on whi ch to print the job. Media Direction This command spec ifie s the edge of the input medium that will enter the printing engine[...]

dc08cc0440 Customer Support Page 16 Feature Description Stapling This command indicates use and lo cation of staple(s). Punch This command indicates hole pun ch es for a print job on a device with hole punch capability. Booklet This comman d enables you to print documents as small booklets. If available on your printer, you can also h ave your job [...]

dc08cc0440 Customer Support Page 17 PostScript Implementation The following table contains the PostScript command s and shows the syntax requ ired to use the feature. Following the table are examples of com mands and a PS file. For more details about PostScri pt commands, refer to the PostScript Language Refere nce Manual, Third Edition , ISBN 0-20[...]

dc08cc0440 Customer Support Page 18 Feature Implementation Values Media Direction <</LeadingE dge int >> setpagedevice Where int is one of the following: 0 = Short Edge; top of canonical page 1 = Long Edge; right side of canoni cal page 2 = Short Edge; bottom of canonical page 3 = Long Edge; left side of canoni cal page null* = Auto Med[...]

dc08cc0440 Customer Support Page 19 Feature Implementation Values Media Class <</MediaClass ( st ring )>> setpagedevice Where string is one of the followin g or null*: stationary = Plain used = Plain Reload recycled = Recycled transparency = Transparencies thin = Light weight (56-63g/m2) label = Labels thick1 = Heavyweight 1 (106-169g/m[...]

dc08cc0440 Customer Support Page 20 Feature Implementation Values Image Enhancement <</PostRenderingEnhance true /PostRenderingEnhanceDetails << /Type 32 /REValue int >> >> setpagedevice Where int is one of the following: 0 = No image enhancem en t 1* = Activate image enhancement Toner Save <</PostRenderingEnhance true[...]

dc08cc0440 Customer Support Page 21 Feature Implementation Values Stapling (w/ finisher) <</Staple int1 /StapleDetails << /Type 7 /Location int2 >> >> setpagedevice Where int1 is one of the following: 0* = Do not staple 3 = Staple at the end of each set Where int2 is one of the following: 0* = top-left-single 1 = bottom-left[...]

dc08cc0440 Customer Support Page 22 Feature Implementation Values Interleaving Paper (Transparency Separator) <</SlipSheet int1 /SlipSheetDetails << /Type 1 /AutoTraySelect int2 /SheetTray int3 /MediaClass ( string ) >> >> setpagedevice Where int1 is one of the following: 0* = Do not deliver interleaving paper. 4 = Deliver i[...]

dc08cc0440 Customer Support Page 23 Feature Implementation Values Separation Order <</Se parationOrder value >> setpagedevice Where value is an array. Legal element values are the pro cess colorant names implie d by the pro cess color model. Use CIE Color <</UseCIEColor value >> setpagedevice Where value is one of the follow[...]

dc08cc0440 Customer Support Page 24 Sample PostScript Headers Example 1 Header for Simple Print %!PS Example 2 Header for Finishing (Letter paper , duplex, 10 copies with collation, st apling with lef t-upper single and finisher tray for output bin) %!PS << /DeferredMediaSelection true >> setpagedevice <</PageSize [612 792]>>[...]

dc08cc0440 Customer Support Page 25 PostScript Fonts The following PostScript fonts are re sident with Adobe interpreter. Font Name PostScript Font Name Albertus /AlbertusMT Albertus Italic /AlbertusMT-Italic Albertus Light /AlbertusMT-Light Antique Olive Roman /AntiqueOlive-Roman Antique Olive Italic /AntiqueOlive-Italic Antique Olive Bold /Antiqu[...]

dc08cc0440 Customer Support Page 26 Font Name PostScript Font Name Gill Sans /GillSans Gill Sans Italic /GillSans-Italic Gill Sans Bold /GillSans-Bold Gill Sans Bold Italic /GillSans-BoldItalic Gill Sans Light /GillSans-Light Gill Sans Light Italic /GillSans-LightItalic Gill Sans Extra Bold /GillSans-ExtraBold Gill Sans Condensed /GillSans-Condense[...]

dc08cc0440 Customer Support Page 27 Font Name PostScript Font Name New Century Schoolboo k Bold /NewCenturySchlb k-Bol d New Century Schoolboo k Bold Italic /NewCenturySchlb k-Bol dItalic NewYork /NewYork OCR-B Letterpress M /OCRB LetM Optima Roman /Optima Optima Italic /Optima-Italic Optima Bold /Optima-Bold Optima Bold Italic /Optima-BoldItalic O[...]

Additional Information Xerox Customer Support wel comes feedback on all documentation - send feedback via e-m ail to: USA.DSSC.Doc.Feedba ck@mc.usa.xerox.com . You can reach Xerox Cust omer Support at 1-800-821 -2797 (USA), TTY 1-800-855-2880 or at http://www.xerox.com . Other Tips about Xerox multifunction device s are available at the following U[...]