Ubiquiti Networks BM2-TI manual

Zero-V ariable Outdoor Radio Models: BM2-Ti, BM5-Ti[...]

Introduction Thank you for purchasing the Ubiquiti Netw orks ™ airMAX ™ Bullet ™ Titanium. This Quick Start Guide is designed to guide you through the installation of the radio . This Quick Star t Guide also includes the warranty terms and is for use with the BulletM2 Titanium, model BM2-Ti, and the BulletM5Titanium, model BM5-Ti. Package [...]

Hardware Overview N-Type Connector Bullet Titanium Radio Rubber Washer Cable Gland Body Compression Nut Ethernet Port Compression Seal[...]

Hardware Installation 1. Unscrew the Cable Gland Body and detach it from the Bullet Titanium Radio. 2. Unscrew the Compression Nut and remove the C ompression Seal from the Cable Gland Body.[...]

3. Slide the Compression Nut over the Ethernet cable with the threaded end facing the RJ-45 connector . Slip the Compression Seal around the cable. 4. Feed the Ethernet cable thr ough the Cable Gland Body and seat the Compression Seal into the Cable Gland Body . 5. Connect the Ethernet cable to the port located on the bottom of the Bullet Titanium [...]

6. Securely screw the Cable Gland Body into the Bullet Titanium Radio so that the Rubber Washer seals the bottom of the radio. 7. Tightly screw on the Compression Nut. Ensure the Compression Seal is securely compressed and tightly sealed around the cable.[...]

8. Connect the Bullet Titanium to the N-T ype connec tor of the antenna. Note: The Bullet Titanium should be mounted vertically to reduce stress on the N-T ype Connector. The N-Type Right Angle Adapter may be used as needed.[...]

Connecting Po wer over Ethernet 1. Connect the other end of the Ethernet cable from the Bullet Titanium to the Ethernet port labeled POE on the PoE Adapter . 2. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE Adapter. 3. Connect the power cord to the pow er por t on the PoE Adapter . Connect the other end of the [...]

Accessing the airOS Utility 1. Make sure that your host machine is connected to the LAN that is connected to the Bullet Titanium. 2. Configure the Ethernet adapter on your host syst em with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser . T ype https://192.168.1.20 in the address field and press enter (PC) or return (Mac)[...]

Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer’ s responsibility to make sure the device is operated within local country regulatory requirements. Since Ubiquiti Networks equipment can be paired with a variety of antennas and cables, the Antenna Gain , Cable Loss , and Output Powe[...]

Specifications Bullet Titanium Processor Atheros MIPS 24KC, 400 MHz Memory 32 MB SDRAM, 8 MB Flash Networking Interface (1) 10/100 Ethernet Port Dimensions 190 x 46 mm Weight 196 g Enclosure Powder C oated Aluminum Antenna Connector N-Type C onnec tor Operating Frequency BM2-Ti BM5-Ti 2402 - 2462 MHz Worldwide: 5170 - 5875 MHz USA: 5725 - 5850 MHz [...]

Safety Notices 1. Read, follow , and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer . W ARNING: Do not use this product in location that can be submerged by water . W ARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightn[...]

Limited W arranty UBIQUITI NETWORKS, Inc (“UBIQUITI NET WORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’ sole and exclusive obligat[...]

Returns No Products will be accepted for replacement or r epair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being receiv ed at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA[...]

Limitation of Liability EXCEPT T O THE EXTENT PROHIBITED BY LOCAL LA W, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIA TES OR SUPPLIERS BE LIABLE FOR DIRECT , SPECIAL, INCIDENTAL, C ONSEQUENTIAL OR OTHER DAMAGES (INCLUDING L OST PROFIT, L OST DA T A, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESUL TS OF USE OF THE[...]

Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must acce[...]

Industry Canada This Class A digital apparatus complies with Canadian ICES-003. T o reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r .p.) is not more than that permitted for succ essful communication. This device complies with Industry Canad[...]

Cet appareil numérique de la classe A est confrome à la norme NMB-003 Canada. Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalent e (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Cet appar[...]

RF Exposure W arning The antennas used for this transmitter must be installed to pro vide a separation distance of at least 2.52 m from all persons and must not be located or operating in conjunction with any other antenna or transmitter . Les antennes utilisées pour ce transmetteur doiv ent être installé en considérant une distance de séparat[...]

RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dis[...]

Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabil[...]

Declaration of Conformity Česky [Czech] UBIQUITI NET WORKS tímto prohla uje, e tent o UBIQUITI NE TWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Dansk [Danish] Undertegnede UBIQUITI NET WORKS erklærer herved, at følgende udstyr UBIQUITI NET WORKS device, overholder de væsentlige kr[...]

Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NET WORKS device, è conforme ai requisiti essenziali ed alle altr e disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar o UBIQUITI NETWORKS dek lar , ka UBIQUITI NET WORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citi[...]

P051713—720-00034-01 www .ubnt.com © 2011-2013 Ubiquiti Networks, Inc. All rights reserved.[...]