Toshiba PRO T210 manual

Toshiba Personal Computer STREAMLINE-S 10 Maintenance Manual TOSHIBA CORPORATION [CONFIDENTIAL][...]

ii [CONFIDENTIAL] SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL Copyright © 2010 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contain[...]

SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL ONFIDENTIAL] iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer SATELLITE T210/T215/PR O T210/T215/PORTEGE T210 MAINTENANCE MANUALL, referred to as the SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENANC[...]

iv [CONFIDENTIAL] SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL The manual is divided into the following parts: Chapter 1 Hardware Overview describes the SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENANCE MANUALL Series system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve [...]

SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL ONFIDENTIAL] v Some operations require you to simultaneously use two or m ore keys. We identify such operations by the key top symbols separated by a plus (+) sign. For example, Ctrl + Pause (Break) m eans you must hold down Ctrl and at the same tim e press Pause (Break) . If three[...]

vi [CONFIDENTIAL] SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL Table of Contents Chapter 1 1.1 Features .............................................................................. Error! Bookmark not defined. 1.2 9.5mm (2.5-inch) HDD ...................................................... Error! Bookmark not defined. 1.3 Po[...]

SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL ONFIDENTIAL] vii 2.21 Wimax troubleshooting process ........................................................................................... 5 0 Chapter 3 3.1 The Diagnostic Test ................................................................................................... [...]

viii [CONFIDENTIAL] SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL Chapter 4 4.1 General ............................................................................... Error! Bookmark not defined. Safety Precautions .............................................................. Error! Bookmark not defined. Before You Begin ...[...]

SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL ONFIDENTIAL] ix Installing the Touch Pad Assembly ................................... Error! Bookmark not defined. 4.9 WLAN Card....................................................................... Error! Bookmark not defined. Removing the WLAN Card ..............................[...]

x [CONFIDENTIAL] SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL Removing the Speakers...................................................... Error! Bookmark not defined. Installing the Speakers ....................................................... Error! Bookmark not defined. 4.20 Thermal Module ...............................[...]

SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL ONFIDENTIAL] xi Figure 2-11 2 in 1 car d troubleshooting process ....................................................................... 31 Figure 2-12 HDD troubleshooting process ................................................................................ 33 Figure 2-13 CRT tr[...]

xii [CONFIDENTIAL] SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL Figure 4.25 Removing the HDD board ........................................ Error! Bookmark not defined. Figure 4.26 Removing the Bluetooth module.............................. Error! Bookmark not defined. Figure 4.27 Removing the RGB board ......................[...]

SATELLITE T210/T215/PRO T210/T215/PORTEGE T210 MAINTENA NCE MANUALL ONFIDENTIAL] xiii Appendix F Series Screw Torque List ....................................................................................... F-1 Appendix G Reliability ....................................................................................................... ...... G-[...]

Chapter 1 Hardware Overview[...]

1 Hardware Overview Satellite T210/T215/Pro T210/T215/PORTEGE T210 Maintenance Manual 1-ii Chapter 1 Contents 1.1 Features .................................................................................................................. 1-1 1.2 9.5mm (2.5-inch) HDD ...................................................................................[...]

1 Hardware Overview Satellite T210/T215/Pro T210/T215/PORT EGE T210 Maintenance Manual 1-iii Figures Figure 1-1A ID Parts Description Placement Part A.......................................................... 1-6 Figure 1-2 SATA HDD ................................................................................................. 1-10 Tables Table 1[...]

[...]

Error! No text of specified style in document. Error! No text of specified style in document. 1 Hardware Overview Satellite T210/T215/Pro T210/T215/PORT EGE T210 Maintenance Manual 1-1 1.1 Features The Toshiba Satellite T210/T215/Pro T210/T215/PORTEGE T210 series portable personal computer is based on a Dual Core/Quad Core Processor, providing high[...]

1 Hardware Overview Error! No text of specified style in document. Error! No text of specified style in document. Satellite T210/T215/Pro T210/T215/PORT EGE T210 Maintenance Manual 1-2  Display (BTO) The computer display features one of the following LCD panels:  11.6”W HD CSV LED (16:9, 1366x768)  Graphics (BTO)  Intel ® Arrandale w[...]

Error! No text of specified style in document. Error! No text of specified style in document. 1 Hardware Overview Satellite T210/T215/Pro T210/T215/PORT EGE T210 Maintenance Manual 1-3 function.[...]

1 Hardware Overview Error! No text of specified style in document. Error! No text of specified style in document. Satellite T210/T215/Pro T210/T215/PORT EGE T210 Maintenance Manual 1-4  Bridge Media Slot This slot allows you to insert SD, MiniSD/ MicroSD (through adapter), Memory Stick/Memory Stick Duo (through adaptor), Memory Stick Pro/Mem ory[...]

Error! No text of specified style in document. Error! No text of specified style in document. 1 Hardware Overview Satellite T210/T215/Pro T210/T215/PORT EGE T210 Maintenance Manual 1-5  Wireless LAN (BTO) Some computers in this series are equipped with a W ireless LAN card. This WLAN module may come in with the following types (depending on the [...]

1 Hardware Overview Error! No text of specified style in document. Error! No text of specified style in document.  Figure 1-1A shows the computer and its system unit configuration. Bridge Media: White Wireless / RF status: Amber WiMax/3G: Blue DC-IN:White Power: /Amber<Blink> White Main Battery: /Amber/Amber<Blink> White HDD/ODD/e-SA[...]

Error! No text of specified style in document. Error! No text of specified style in document. 1 Hardware Overview A A B B C C D D E E 1 1 2 2 3 3 4 4 Titl e Siz e Document Number R e v Dat e: Sh ee t of Security Classification Compal Secre t Data THIS SHEET OF ENGINEERING DRAWING IS THE PROPRIETARY PROPERTY OF COMPAL ELECTRONICS, INC. AND CONTAINS [...]

1 Hardware Overview Error! No text of specified style in document. Error! No text of specified style in document. Satellite T210/T215/Pro T210/T215/PORT EGE T210 Maintenance Manual 1-8 The system unit of the computer consists of the following com ponents:  Processor (BTO) The computer is equipped with one of the following Intel ® processors: ?[...]

Error! No text of specified style in document. Error! No text of specified style in document. 1 Hardware Overview Satellite T210/T215/Pro T210/T215/PORT EGE T210 Maintenance Manual 1-9  Graphics Controller  Intel ® Arrandale with Ibex Peak HM55 for integrated graphics.  Toshiba Value Added Package support featuring VideoStream Playback fo[...]

1 Hardware Overview Error! No text of specified style in document. Error! No text of specified style in document. 1.2 9.5mm (2.5-inch) HDD The computer contains an extremely low-prof ile and lightweight, high-performance HDD. The 9.5 mm HDD incorporates HDD Protection, and NCQ and 3D sensor support. The HDD interface conforms to Serial ATA. Storage[...]

Error! No text of specified style in document. Error! No text of specified style in document. 1 Hardware Overview Satellite T210/T215/Pro T210/T215/PORTEGE T210 Maintenance Manual 1-11 1.3 Power Supply The power supply unit provides constant voltage (19V) for the system board and performs the following functions: 1. Power input monitor  Checks w[...]

1 Hardware Overview Error! No text of specified style in document. Error! No text of specified style in document. Satellite T210/T215/Pro T210/T215/PORTEGE T210 Maintenance Manual 1-12 6. Output monitor  Monitors the voltage output to the system block (load/logic circuit side).  Monitors the voltage, over-voltage, input/output current of the [...]

Error! No text of specified style in document. Error! No text of specified style in document. 1 Hardware Overview Satellite T210/T215/Pro T210/T215/PORTEGE T210 Maintenance Manual 1-13 1.4 Batteries The computer has the following two types of batteries:  Main Battery Pack  Real Time Clock (RTC) Battery 1.4.1 Main Battery The main battery pack[...]

1 Hardware Overview Error! No text of specified style in document. Error! No text of specified style in document. Satellite T210/T215/Pro T210/T215/PORTEGE T210 Maintenance Manual 1-14 NOTE: The time required for normal charge depends on the power consumption by the system. Using a fluorescent lamp and frequently accessing the disk consumes more po[...]

Chapter 2 Troubleshooting Procedures[...]

[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 1 Chapter 2 Contents 2.1 Troubleshooting Introduction ...................................................................................... 3 2.2 Troubleshooting Flowchart .......................................................................................... 4 2.3 Power[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 2 Figures Figure 2-1 Troubles hooting flowchart (1/2)……………………………………………….5 Figure 2-1 Troubles hooting flowchart (2/2)……………………………………………….6 Figure 2-2 Power Supply Troubleshooting Process………………[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 3 2.1 Troubleshooting Introduction Chapter 2 describes how to determine if a Fi eld Replaceable Unit (FRU) in the com puter is causing the computer to malfunction. The FRUs covered are: 1. Display 7. Wireless LAN 13. 4 in 1 card 19. Wimax 2. HDD 8. Camera 14. CRT 3. Keyboard[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 4 2.2 Troubleshooting Flowchart If you know the location of the ma lfunction, turn directly to the appropriate section of this chapter. If the problem is unspecified, use the flowchart in Figure 2-1 as a guide for determining which troubleshooting procedures to execute. Befo[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 5 STA R T C on n ect t h e A C ad ap t er t o t h e D C - I N sock et I s t h e DC- I N L E D o n ? Is th e B a tte r y L E D o n ? T u rn th e P o w e r s w itc h o n I s t h e P o we r On L ED o n ? I s t he " T os hi ba or D yna book" l og o m essage d i sp l ay[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 6 A Does typed characters appear correctly? Insert USB memory disk. Then run the diagnostics test program Is the diagnostics test loaded? Allow each test to perform automatically Is an error detected by any of the diagnostics tests? System is normal End Yes Yes Yes No Perfor[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 7 If the diagnostics program cannot detect an erro r, the problem may be intermittent. The test program should be executed several times to isol ate the problem. W hen a problem has been located, perform the appropriate trou bleshooting procedures as follows: 1. If an error [...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 8 Other problems that are not covered by the di agnostics program may be discovered by a user. 1. If an error is detected when using an ex ternal USB device, perform the external USB Devices Troubleshooting pr ocedures in Section 2.6 2. If an error is detected when using the[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 9 2.3 Power Supply Troubleshooting ST AR T Are the D C-IN and B a tte ry L E D s lit? Can you tur n t he com puter o n? A r e th e inte rn a l p o w er connecti ons secure? END Check P ower Supp l y St at us (Procedure 1) No Ye s Chec k po wer su ppl y connect ions (Procedur[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 10 as instructed. The flowchart in Figure 2-2 give s a summary of the proc ess. The procedures described in this section are: Procedure 1: Power status check Procedure 2: Adaptor / battery replacement Procedure 3: Power supply connection check Procedure 4: Diagnostic check P[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 11 Table 2-2 DC-IN LED DC-IN LED Power supply status Solid on AC power exists (LED is Green). Off No AC power exists. To check the power supply status, install a ba ttery pack and connect an A C adaptor to the DC-IN port on the computer and to a power supply. If the DC-IN LE[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 12 Procedure 3 Power supply connection check The power supply wiring diagram is shown below: AC adaptor Sys t e m boar d B a tte ry A C adaptor cor d AC p o we r c o r d Any of the connectors may be disconnected. Perform Check 1. Check 1 Disconnect the AC power cord from wal[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 13 Procedure 4 Diagnostic check The power supply may not charge the battery pack. Perform the following procedures: 1. Reinstall the battery pack. 2. Attach the AC adaptor and turn on the power . If you cannot turn on the power, go to Procedure 5. 3. Run the Diagnostic test [...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 14 2.4 Display Troubleshooting Per f or m ext er nal di spl a y che c k ( P r ocedur e 1) STA R T D o es t h e ex t ernal di s pl ay f unct i on ok? Per f or m di agnos t i c che ck (Proced ure 2 ) No Wa s a d i s p l a y pr obl em det e c t ed? Per f or m connec t or a nd r[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 15 This section describes how to determ ine if th e computer’s display is functioning properly. The process is outlined in Figure 2-3. Start wi th Procedure 1 and continue with the other procedures as instructed. Procedure 1: External display check Procedure 2: Diagnostic [...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 16 Procedure 3 Connector and replacement check The LCD module and system board are connected to the display circuits. Any of these components may be damaged. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassemble the computer and then perform the [...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 17 2.5 Keyboard Troubleshooting STA R T Per fo r m di agnos t i c che ck (Procedure 2) W as a keyboar d probl em d et ect ed ? R eplace syst em b o ard END Ye s No K eyboar d i s not f aul t y. C ont i nue t r oubl es hoot i ng- r ef er to F ig u r e 2 .1 Figure 2-4 Keyboard[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 18 To determine if the computer’s keyboard is functioning properly, perform the following procedures. Figure 2-4 outlines the p rocess. St art with Procedure 1 and continue with the other procedures as instructed. Procedure 1: Diagnostic check Procedure 2: Connector and re[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 19 2.6 External USB Devices Troubleshooting R epl ace sy st em b o ar d ( P r oce dur e 2) EN D O r ig in a l U S B de vi ce i s fa u lt y P er f o r m ex t er n al d ev i ce a nd c onnec t i on che c k ( P r oce dur e 1) ST A R T D oe s t he de vi c e f unct i on co r r ect[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 20 To determine if the computer’s external US B devices are functioning properly, perform the following procedures. Figure 2-5 outlines the proce ss. Start with Procedure 1 and continue as instructed. Procedure 1: External device and connection check Procedure 2: Replace s[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 21 2.7 Touch pad Troubleshooting P e r f or m T ouchpa d ch eck (P ro c e d u re 1 ) ST A R T D oe s T ouchpa d f unct i on ok? P e r f or m di agnos t i c ch eck ( P r oce dur e 2) No Wa s a T o u c h p a d pr obl em de t e c t ed? P er f o r m co n n ect or an d r epl acem[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 22 To determine if the computer’s built-in T ouchPad is functioning properly, perform the following procedures. Figure 2-6 outlines the proce ss. Start with Procedure 1 and continue as instructed. Procedure 1: Perform Touchpad test Procedure 2: Touchpad connection check Pr[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 23 2.8 Speaker Troubleshooting ST A R T D o al l sour ces have s a me p r o b l e m? EN D P erfo rm e a rp ho n e test (P ro ce d u re 2 ) Do e a r p h o n e s f un ct i o n co r r ect l y? P erf or m connect i on check (P ro ce d u re 3 ) P erf orm repl acem ent check (P ro[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 24 To determine if the computer’s built-in sp eakers are function ing pr operly, perform the following procedures. Figure 2-7 outlines the pro cess. First adjust the speaker volume to an appropriate level. Start with Proced ure 1 and continue as instructed. Procedure 1: Au[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 25 2.9 Wireless LAN Troubleshooting STA RT Perform W irel ess L A N con necti on check (Proc edu re 1) W a s a w irel ess LA N problem delected? Perform connector and replacemen t check (Proc edu re 2) Replace w ir eless LA N antenna/unit Re place system boa rd END Yes W ire[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 26 The wireless LAN antenna wire, wireless LAN un it or system board may each be th e source of a wireless LAN fault. Any of these com ponents may be dam aged. To determine if the computer’s wireless LAN system is functioni ng properly, perform the following procedures. Fi[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 27 2.10 Camera Troubleshooting Figure 2-9 Camera troubleshooting process[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 28 The Camera board or system board may be the reason of a Cam era fault. Either of these two components may be damaged. To determine if the com puter’s Camera is functioning properly, perform the following procedures. Fi gure 2-9 outlines the process. Start with Procedure[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 29 2.11 Bluetooth Troubleshooting Figure 2-10 Bluetooth troubleshooting process[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 30 The Bluetooth antenna wire, Bluetooth module or system board may be the reason of a Bluetooth fault. Any of these components may be dam aged. To determine if the computer’s Bluetooth is functioning properl y, perform the following proce dures. Figure 2-10 outlines the p[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 31 2.12 4in1 card Troubleshooting START Do errors occur d uring 4 IN 1 CA RD t es t ? Perform 4 I N 1 card socke t replacem ent check (Procedure 2) Replace syst em board END 4 IN 1 unit is not faulty. Perform 4 in 1 CARD test (Procedure 1) No Yes Figure 2-11 4 in 1 card trou[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 32 Procedure 2: 4 in 1 card socket check Procedure 1 4 in 1card test The 4 in 1 Card test card contains a 4 in 1 card test program. Ensure the card in fully inserted into the socket before running the program. If an error occurs during the 4 in 1 card test, perform Procedure[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 33 2.13 HDD Troubleshooting Figure 2-12 HDD troubleshooting process[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 34 The HDD or system board may be the reason of a HDD fault. Either of these two components may be damaged. To determine if the comput er’s HDD is functioning properly, perform the following procedures. Figure 2-12 outlines the p rocess. Start with Procedure 1 and co ntinu[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 35 2.14 CRT Troubleshooting P e rfo rm C R T c o n n e c ti o n ch eck ( P r oced u r e 1 ) ST A R T D o es r ep l acem en t CRT c a b l e f u nct i on pr oper l y? P e rfo rm C R T s e t c h e c k ( P r oced u r e 2 ) R epl ace s y st em b o ar d EN D No R ep l ace C R T ca[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 36 Procedure 2: CRT set check Procedure 1 CRT connection check The CRT cable may be damaged or the conne ctions may be loose. Perform Check 1: Check 1 Make sure CRT cable is firmly pl ugged into both the CRT set and the CRT port of the computer. If the cable is connected cor[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 37 2.15 LAN Troubleshooting ST A R T P e r f or m di a gnos t i c ch eck ( P r oc edur e 2) Wa s a L A N pr obl e m de t e ct e d? P e rfo rm c o n n e c t o r a n d r ep l acem en t ch eck ( P r oc edur e 3) R epl ace sy st em b o ar d EN D Ye s No L A N is n o t f a u lty [...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 38 To determine if the computer’s LAN port is functioning properly, perform the following procedures. Figure 2-14 outlines the process. Start with Procedure 1 and continue as instructed. Procedure 1: Diagnostic test Procedure 2: Connection and replacement check Procedure 1[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 39 2.16 MIC Troubleshooting Figure 2-15. MIC troubleshooting process The MIC module or system board may be the re ason of a MIC fault. Either of these two components may be damaged. To determine if the computer’s MIC is functioning properly, perform the following pr ocedur[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 40 Procedure 2: Connector and replacement check Procedure 1 Windows Application test Run the functioning Program (record.exe) on Windows m odel, which will display the MIC test result. If tests and diagnostics result abnormal go to Pr ocedure 2. If an error is not located, t[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 41 2.17 3D Sensor Troubleshooting Figure 2-16. 3D sensor troubleshooting process The operation or system board may be the reason of 3D sensor fault. Either of these two may be damaged. To determine if the compute r’s 3D is functioning properly, perform the following proced[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 42 Procedure 2 Replacement check Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks. Check 1 Make sure that 3D sensor te st operation is correct, go to Check 2. Check 2 The system board may be dam ag[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 43 2.18 3G Troubleshooting STA R T P e rfo rm W in d ow s a p p l ic atio n t es t ( P rocedure 1) W as a 3G p robl em det ect ed? P erf orm syst em i nfo and el ect ri c w ave check ( P rocedure 2) R epl ace 3G an t enn a/ uni t R epl ace syst em bo ard END Ye s 3G s yst em[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 44 functioning properly, perform the following proc edures. Figure 2-17 outlines the process. Start with Procedure 1 and continue with the other procedures as instructed. Procedure 1: Windows Application check Procedure 2: Connector and replacement check Procedure 1 Windows [...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 45 Procedure 2 Connector and replacement check The 3G antenna, 3G unit or system board may be disconnected or damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks. Check 1 Make sure that the 3[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 46 2.19 HDMI Troubleshooting Per for m H D M I conne ct i on check ( P r ocedur e 1) STA R T D oes r epl acem en t H D M I cabl e f unct i on pr oper l y? P erfo r m H D M I se t ch ec k ( P r ocedur e 2) R epl ace syst em b oar d EN D Ye s R eplace H D M I cabl e No H D M I[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 47 Procedure 1: HDMI connection check Procedure 2: HDMI set check Procedure 1 HDMI connection check The CRT cable may be damaged or the conne ctions may be loose. Perform Check 1: Check 1 Make sure HDMI cable is firmly pl ugged into both the CRT set and the CRT port of the c[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 48 2.20 E-SATA Troubleshooting START Perform E-S A T A device check (Procedure 1) Is E-SATA transmission ok? Perform diagnostic check (Procedure 2) Was an E -SA T A problem detected? Perform connection and replacement check (Procedure 3) Replace syst em board END Yes Yes E-S[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 49 To determine if the computer’s E-SATA sy stem is functioning properly, perform the following procedures. Figure 2-19 outlines the p rocess. Start with Procedure 1 and co ntinue with the other procedures as instructed. Procedure 1: E-SATA device check Procedure 2: Window[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 50 2.21 Wimax Troubleshooting START Perform W im ax connecti on check (Procedure 1) W a s a W imax problem delect ed? Perform connector and replacemen t check (Procedure 2) Rep lace W imax antenna/unit Rep lace s ystem board END Ye s W im ax syst em is not faul ty. C onti nu[...]

2 Troubleshooting Procedures Satellite T210/T215 Series Maintenance Manual 51 The Wimax antenna wire, Wimax unit or sy stem board may each be the source of a W i max fault. Any of these components may be damage d. To determine if the computer’s Wim ax system is functioning properly, perform the following procedures. Figure 2-20 outlines the proce[...]

Chapter 3 Tests and Diagnostic[...]

3. Tests and Diagnostics Satellite T210/T215 Series Maintenance Manual 2 3.1 The Diagnostic Test ........................................................................................................ .......... 3 3.2 Executing the Diagnostic Test.............................................................................................. ..... 4[...]

3. Tests and Diagnostics Satellite T210/T215 Series Maintenance Manual 3 3.1 The Diagnostic Test This chapter explains how to use the Test & Diagnostic program to test the functions of the (Base on Streamline S10 T&D version 1.0) hardware modules. The program consists of a series of tests that run automatically when the Diagnostics Program [...]

3. Tests and Diagnostics Satellite T210/T215 Series Maintenance Manual 4 3.2 Executing the Diagnostic Test Free-DOS is required to run the DIAGNOSTI CS PROGRAM. To start the DIAGNOSTIC PROGRAM, follow these steps: Insert the diagnostics USB memory and turn on the com puter. (The diagnostics USB memory contains the Free-DOS boot files.) And then fol[...]

3. Tests and Diagnostics The below display will show up at the beginning of T&D program If the test result passes, the following display will show up: Satellite T210/T215 Series Maintenance Manual 5[...]

3. Tests and Diagnostics If an error is detected and a test fails, the following message displays: Then press any key for next actions, the below display presented. Satellite T210/T215 Series Maintenance Manual 6[...]

3. Tests and Diagnostics 3.3 Display Configuration This Item will show the unit configuration. It includes:  CPU (CPU type; Cache ; CPU speed ;CPU FSB)  DDRAM SIZE  Panel ID  HDD type (Vendor ID. Model.)  VRAM size / VGA CHIP TYPE  Battery cell (3cell; 6cell.)  Wireless type  LAN Type  Bluetooth  SKUID The screen shoul[...]

3. Tests and Diagnostics 3.4 Audio sound test The audio sound test allows the user to aurally confirm the speaker functions. And the speaker will send out music during test. Before the Audio Test, you will see below note: Press any key, then the program will test below item: 1. Line out Left channel test 2. Line out Right channel test 3. Playing 44[...]

3. Tests and Diagnostics If the function test fail, you can press “N” to stop test, and then it will display as below; Satellite T210/T215 Series Maintenance Manual 9[...]

3. Tests and Diagnostics Press any key, the program will return to the below display, and you can press “Y” or “N” to judge the result. Satellite T210/T215 Series Maintenance Manual 10[...]

3. Tests and Diagnostics 3.5 Fan ON/OFF Test The fan test allows the user to test aurally whether the fan is working. And follow the below procedures for this test:  The computer will let the fan be “ON” after any key pressed. Feel the wind or listen the rotating sound to check whether the fan is working or not. NOTE : Remember to approach f[...]

3. Tests and Diagnostics If FAN RPM check is OK, it will show as below: If FAN RPM check is NG, it will show as below: Satellite T210/T215 Series Maintenance Manual 12[...]

3. Tests and Diagnostics 3.6 Main Battery Charge Test NOTE : The AC adaptor should be connected to successfully run this test . 45W with 19V DC for ALL SKU This test shows and measures the main battery:  Battery type (Lion)  Manufacturer (Sanyo/Panasonic/Sony)  Remain charge capacity (0 ~ 100%)  Charge function (PASS/FAIL) - “Battery [...]

3 Tests and Diagnostics 3. 7 FDD Test NOTE : Before running the FDD test, prepare a formatted work diskette (1.44 MB). Need to insert FDD when power on machine. Otherwise the Floppy can not be detected. The Floppy Disk Test includes three subtests of the: 1. Sequential seek/verify function (Range: Track 0 ~ 79) 2. Funnel code seek/verify function ([...]

3. Tests and Diagnostics 3.8 Memory check This test will check if the computer’s Mem ory Frequency and Size is correct in every slot. Before Memory test start, you should choice the below item: 1. Memory Read test 2. Memory Write test 3. Memory Read & Write test 4. Memory INFO test 5. Back to title Satellite T210/T215 Series Maintenance Manua[...]

3 Tests and Diagnostics When you execute this test, after you press the re lated num ber, the test picture will show as below: Memory Read Test M e m o r y W r i t e T e s t Satellite T210/T215 Series Maintenance Manual 16[...]

3. Tests and Diagnostics Memory Read & Write Test Memory Info Test NOTE: Base on normal status, the Memory Info speed show 800/667 , then the RAM is DDR2 ; if speed show 1066 , and then the RAM is DDR3 . Satellite T210/T215 Series Maintenance Manual 17[...]

3 Tests and Diagnostics 3. 9 Keyboard Test The keyboard test checks the all keys function. NOTE: The Num Lock and the Overlay mode must be off to execute the keyboard test. Before keyboard test starts, the keyboard matrix code should be chosen as below display: 1. S (US, for America) 2. J (Japan, for Japan) 3. K (UK, for Europe) When you execute th[...]

3. Tests and Diagnostics Japan keyboard UK keyboard Satellite T210/T215 Series Maintenance Manual 19[...]

3. Tests and Diagnostics 3.10 Mouse (Pad) Test The Mouse test allows the user to select and assign values to the following, using the Touch Pad or “ Tab ” key to move between selections: 1. Mouse Speed (on a scale from slow to fast) 2. Acceleration (Off, Low, Medium, High) 3. Button Assignments (Left + Right / Right button, either Unassigned or[...]

3. Tests and Diagnostics 3.11 LCD Pixels Mode Test This LCD pixels mode test checks whether video display is fine. This test includes two modes of the test: 1. Text Mode - including 40*25 (16 colors) and 80*25 (2/16colors). 2. VGA Mode - including 320*200 (2/4/16 colors), 640*200 (2/16 colors), 640*350 (2/16 colors), 640*480 (2/16/256 colors). The [...]

3. Tests and Diagnostics 3.12 Magnetic Switch Test The Magnetic switch test checks the Magnetic function of the unit. When LCD cover closed, the Magnetic should enable to turn off the display. Follow below steps to run this test: 1. Close the LCD cover. 2. Open the LCD. Then it will indicate whether the test is passed or failed. 1>. If the Magne[...]

3. Tests and Diagnostics Satellite T210/T215 Series Maintenance Manual 23[...]

3. Tests and Diagnostics 3.13 LAN Test The LAN test checks the LAN full-duplex environment. NOTE: LAN loopback needs to plug in before test begins. And LAN information will show on the test screen:  IO Base – Port: A000H  IRQ – BH, it’s “IRQ B”.  Node – it is “MAC Address”.  Line Speed –1000 Mbps or 100Mbps or 10 Mbps.[...]

3. Tests and Diagnostics The screen should display as below, indicating whether the subtests pass or fail when finished. If an error is detected and a test fails, the following message displays: Satellite T210/T215 Series Maintenance Manual 25[...]

3. Tests and Diagnostics 3.14 RTC Test Checks the computer’s RTC (Real Time Clock) and calendar functions by com paring the Free- DOS and CMOS values. The test runs automatically. The screen should display as below, indicating whether the test is passed or failed when finished. The screen will show below picture, if RTC test is OK. Satellite T210[...]

3. Tests and Diagnostics The screen will show below picture, if RTC test is FAIL. Satellite T210/T215 Series Maintenance Manual 27[...]

3. Tests and Diagnostics 3.15 G-sensor test NOTE : please keep 90 degree between logic upper and LCD panel when test The display of a test program and the set method of PC are shown below. Display of a Test Program, The portion whic h PC and Test-Fixture contact is green. Set method of PC <1> Z Upper X If the picture shows as below, it means [...]

3. Tests and Diagnostics Set method of PC <4> Satellite T210/T215 Series Maintenance Manual 29 Test 5: Set method of PC <5> Test Result A test result is displayed when a test is completed. A display of result is O.K. or NG. And an error flag is returned at the end of a program. If the picture shows as below, it means the 3D G-sensor fun[...]

3. Tests and Diagnostics If the picture shows as below, it means the 3D G-sensor function is NG 3.16 HDD Test Satellite T210/T215 Series Maintenance Manual 30[...]

3. Tests and Diagnostics NOTE : You can press “Ctrl + Fn + Break” key to stop HDD test if you want The HDD test allows the user to verify the HDD ok or not. First, please select HDD test method, Screen would display as below: After you select the method, then input password: “hard disk”, if input password is Right, the screen would display [...]

3. Tests and Diagnostics The screen will display as below picture to show the subtest is passed or failed when finished: If it is show the picture as below, it means HDD function is OK If the picture shows as below, it means he HDD function is NG Satellite T210/T215 Series Maintenance Manual 32[...]

3. Tests and Diagnostics Satellite T210/T215 Series Maintenance Manual 33[...]

3. Tests and Diagnostics 3.17 Read DMI Compal write Toshiba Part No (version), Toshiba Serial No (Serial No), Product Name, OEM string and UUID , If you want to double check the DMI data, please select Read DMI item, the figure below will be displayed: Satellite T210/T215 Series Maintenance Manual 34[...]

3. Tests and Diagnostics 3.18 Write DMI When you want to write DMI data, please select which data you want to write, the figure below will be displayed: 1. Write Product (32) 2. Write Serial (32) 3. Write Version (32) 4. Write OEM String (64) 5. Back to test title After write OK, you should reboot the system that can make the setting effective, or [...]

3. Tests and Diagnostics NOTE : should input correct DMI data, and should reboot the system that can make the setting effective. Satellite T210/T215 Series Maintenance Manual 36[...]

3. Tests and Diagnostics 3.19 Toshiba Logo set Set the computer’s Toshiba Logo for other region except Japan SKU. The screen should display as below, indicating whether the test is passed or failed when finished. Press any key continue to auto set, if write OK, the following message displays: Satellite T210/T215 Series Maintenance Manual 37[...]

3. Tests and Diagnostics When Toshiba Logo set finish, please restart machine, when show below Logo: Satellite T210/T215 Series Maintenance Manual 38[...]

3. Tests and Diagnostics 3.20 Dynabook Logo set Set the computer’s Dynabook Logo for Japan SKU. The screen should display as below, indicating whether the test is passed or failed when finished. Press any key continue to auto set, if write OK, the following message displays: Satellite T210/T215 Series Maintenance Manual 39[...]

3. Tests and Diagnostics When Dynabook Logo set finish, please restart machine, when show below Logo: Satellite T210/T215 Series Maintenance Manual 40[...]

3. Tests and Diagnostics 3.21 TP TYPE R/W TEST This T/P TYPE R/W test checks the computer’s T/P TYPE and users write T/P vendor ID into EEPROM. The test runs automatically. The screen should display as below, indicating whether the test is passed or failed when finished. If write T/P type fail, the screen would display as below Satellite T210/T21[...]

3. Tests and Diagnostics If read T/P type fail, the screen would display as below If W/R T/P type passes, the screen would display as below Satellite T210/T215 Series Maintenance Manual 42[...]

3. Tests and Diagnostics Satellite T210/T215 Series Maintenance Manual 43[...]

3. Tests and Diagnostics 3.22 EE-PROM SETTING This EE-PROM SETTING will set the computer’s function status into EEPROM, included supported function and no support function. NOTE : Should perform EE-PROM SETTING once change M/B. It defined as normal rule. The screen should display as below: If press “1” to set MIC function status in EE-PROM, t[...]

3. Tests and Diagnostics If this unit has MIC function, press “Y” then program will set MIC enable automatically as below: If this unit has no MIC function, press “N” then program will set MIC disable automatically as below: Then press any key go back to EE-PROM SETTING option as below: Satellite T210/T215 Series Maintenance Manual 45[...]

3. Tests and Diagnostics If press “7” to disable all no support function, program will perform autom atically as below: Satellite T210/T215 Series Maintenance Manual 46[...]

3. Tests and Diagnostics Then press any key to go back to EE-PROM SETTING option as below: Satellite T210/T215 Series Maintenance Manual 47[...]

3. Tests and Diagnostics If press “9” program will go back to test title as below: Satellite T210/T215 Series Maintenance Manual 48[...]

Chapter 4 Replacement Procedures[...]

4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-ii Chapter 4 Contents 4.1 General ................................................................................................................... 4-1 Safety Precautions .......................................................................................... 4-[...]

4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-iii 4.8 Touch Pad Assembly ............................................................................................ 4-24 Removing the Touch Pad Assembly ............................................................ 4-24 Installing the Touch Pad Assembly..........[...]

4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-iv Installing the LED Cable and LED Board ................................................... 4-40 4.19 Speakers ............................................................................................................... 4-41 Removing the Speakers ..............[...]

4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-v Figures Figure 4.1 Removing the battery pack ................................................................................... 4-9 Figure 4.2 Removing the bottom door ................................................................................. 4-11 Figure 4[...]

4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-vi Figure 4.32 Removing the LED board ................................................................................. 4-40 Figure 4.33 Removing the speakers ..................................................................................... 4-41 Figure 4.34 Disc[...]

4.14 Bluetooth Module 4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-1 4.1 General This chapter explains how to disassemble the laptop and replace Field Replaceable Units (FRUs). Some replacement procedures m ay not require you to remove all the surrounding FRUs to replace only one FRU. The chart below shows the[...]

4 Replacement Procedures 4.14 Bluetooth Module 4.2 Battery 4.3 Mem ory 4.4 HDD 4.5 Keyboa rd 4.6 Logic Upper Assem bly 4.10 IO Board 4.9 WLA N Card 4.7 Powe r Butt on Board 4.8 T ouch Pad Assembly 4.12 HDD Board 4.13 Bluetooth 4.14 VGA Board 4.16 Moth erboard 4.15 Display Assembly 4.19 Therm al Module 4.17 LED Ca ble and LED Bo ard 4.18 Speak ers 4[...]

4.14 Bluetooth Module 4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-3 Safety Precautions Before you begin disassembly read the following safety precautions carefully. Be sure to follow them while you are working. DANGER: 1. Always use the original batteries or replacement batteries authorized by Toshiba. Batter[...]

4 Replacement Procedures 4.14 Bluetooth Module Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-4 CAUTION: 1. Before replacing a component, make sure that the replacement component meets the required specifications. To avoid laptop failures, never use components that do not meet the specifications. 2. To avoid internal damage such as shor[...]

4.14 Bluetooth Module 4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-5 Before You Begin Before you begin to disassemble the laptop, keep in mind the precautions and advice in this section. Always begin disassembly by removing the AC adapter and battery pack. Rem ove the optional parts and accessories as well. Th[...]

4 Replacement Procedures 4.14 Bluetooth Module Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-6 Disassembly Procedures The cable connectors come in these two basic types:  Pressure plate connectors  Normal pin connectors To remove a pressure plate connector, pull up the tabs on either side of the connector's plastic pressure [...]

4.14 Bluetooth Module 4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-7 Tools and Equipment For your safety and that of other people in the working environment, it is strongly recomm ended that you use electrostatic discharge (ESD) equipment. The proper use of this equipment will ensure successful repair work and[...]

4 Replacement Procedures 4.14 Bluetooth Module Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-8 Colors of Screw Shanks For easy identification of the correct screws, the screw shanks are colored according to their lengths, as follows:  Screws of an odd-numbered length Blue  Screws of a special length Black Screws of a special leng[...]

4.14 Bluetooth Module 4 Replacement Procedures 4.2 Battery Removing the Battery Pack Remove the battery pack according to the following procedures and Figure 4.1. CAUTION: When handling the battery packs, use care not to short circuit the terminals. Do not drop, hit, twist, or bend the battery packs. Do not scratch or break up their casing. 1. Clos[...]

4 Replacement Procedures 4.14 Bluetooth Module Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-10 Installing the Battery Pack Install the battery pack according to the following procedures. CAUTION: The battery packs contain a lithium ion battery, which can explode due to improper replacement, use, handling or disposal. Always dispose of[...]

4.14 Bluetooth Module 4 Replacement Procedures 4.3 Memory Removing the Optional Memory Remove the optional mem ory according to the following procedures and Figure 4.2 after checking that the laptop is turned off. CAUTION: Remove the optional memory after turning off the laptop. If this is violated, the laptop or memory can be damaged. 1. Close the[...]

4 Replacement Procedures 4.14 Bluetooth Module 4. Pull the two memory lock latches outward so that the m emory pops up. 5. Pull the memory up and out at a 45 degree angle, using care to avoid touching the connectors. Figure 4.3 Removing the right hand RAM from the laptop 6. Repeat steps 4 and 5 to remove the other mem ory. Figure 4.4 Removing left [...]

4.14 Bluetooth Module 4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-13 Installing the Optional Memory Install the optional memory according to the following procedures after checking that the laptop is turned off. CAUTION: Install the optional memory after turning off the laptop. If this is violated, the laptop[...]

4 Replacement Procedures 4.14 Bluetooth Module 4.4 HDD Removing the HDD CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive. Remove the HDD (hard disk drive) according to the following procedures and Figures 4.5 and 4.6. 1. Close the laptop and turn it upside d[...]

4.14 Bluetooth Module 4 Replacement Procedures 4. Remove the two M2x3 screws securing the HDD pack to the HDD bay. 5. Pull the tab in the direction indicated in Figure 4.6 to release the HDD, and then remove the HDD pack. M2x3*2 Figure 4.6 Removing the HDD pack from the HDD bay NOTE: Do not disassemble the HDD pack when it is working normally. Disa[...]

4 Replacement Procedures 4.14 Bluetooth Module M3x3*4 Figure 4.7 Removing the HDD foil CAUTION: Do not apply pressure to the top or bottom of the drive. Installing the HDD Install the HDD according to the following procedures. CAUTION: To avoid damage, always hold the HDD only by its sides. 1. Place the HDD foil on the HDD and secure it with four M[...]

4.14 Bluetooth Module 4 Replacement Procedures 4.5 Keyboard Removing the Keyboard Remove the keyboard according to the following procedures and Figures 4.8, 4.9. 4.10 and 4.11. 1. Close the laptop and turn it upside down. 2. Remove the two M2x6 screws securing the keyboard to the logic lower assembly as shown in Figure 4.8. M2x6*2 Figure 4.8 Removi[...]

4 Replacement Procedures 4.14 Bluetooth Module 3. Open the laptop screen and hold the unit upside down, taking care not to put undue stress on the screen hinges. Use a slim object such as a paperclip or a flathead screwdriver to release the three hooks securing the keyboard to the logic assembly as shown in Figure 4.9. Figure 4.9 Releasing the keyb[...]

4.14 Bluetooth Module 4 Replacement Procedures 5. Shift the keyboard upward to expose the connectors as shown in Figure 4.11. 6. Unlock and disconnect the keyboard FCC cable from the logic upper assembly, and then remove the keyboard. Figure 4.11 Removing the keyboard Installing the Keyboard Install the keyboard according to the following procedure[...]

4 Replacement Procedures 4.14 Bluetooth Module 4.6 Logic Upper Assembly Removing the Logic Upper Assembly Remove the logic upper assembly according to the following procedures and Figures 4.12, 4.13 and 4.14. 1. Close the laptop and turn it upside down. 2. Remove the eight M2x6 screws securing the logic upper assembly to the logic lower assembly. M[...]

4.14 Bluetooth Module 4 Replacement Procedures 3. Turn the laptop right side up and open it. 4. Disconnect the power board FFC, touch pad FFC and RGB board FFC. 5. Remove the two M2x3 and one M2x6 screws securing the logic upper assembly to the logic lower assembly. M2x3*2 M2x6*1 Figure 4.13 Disconnecting the logic upper assembly cables 6. Use your[...]

4 Replacement Procedures 4.14 Bluetooth Module 7. Work your way around the edges and across the bottom edge, and rem ove the logic upper assembly. Figure 4.14 Prying up the logic upper assembly Installing the Logic upper assembly Install the logic upper assembly according to the following procedures. 1. Seat the logic upper assembly in the correct [...]

4.14 Bluetooth Module 4 Replacement Procedures 4.7 Power Button Board Removing the Power Button Board Remove the power button board according to the following procedures and Figure 4.15. 1. Remove one M2x3 screw securing the power button board to the back of the logic upper assembly. 2. Remove the power button board from the logic upper assem bly. [...]

4 Replacement Procedures 4.14 Bluetooth Module 4.8 Touch Pad Assembly Removing the Touch Pad Assembly Remove the touch pad assembly according to the following procedures and Figures 4.16, 4.17 and 4.18. 1. Turn the logic upper assembly upside down. 2. Disconnect the touch pad FFC and remove the two M2x2 and one M2x3 screws securing the touch pad as[...]

4.14 Bluetooth Module 4 Replacement Procedures 3. Raise the touch pad assembly from the top edge, and rem ove it from the logic upper assembly. Figure 4.17 Removing the touch pad assembly 4. Place the touch pad assembly on a flat surface such as a desk. 5. Remove one M2x2 screw securing the touch pad button board to the touch pad bracket and separa[...]

4 Replacement Procedures 4.14 Bluetooth Module Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-26 Installing the Touch Pad Assembly Install the touch pad assembly according to the following procedures. 1. Place the touch pad button board on the touch pad bracket in the correct position and secure it with one M2x2 screw. 2. Seat the touch[...]

4.14 Bluetooth Module 4 Replacement Procedures 4.9 WLAN Card Removing the WLAN Card Remove the WLAN card according to the following procedures and Figure 4.19. 1. Disconnect the two antennas from the WLAN card. 2. Remove the two M2x3 screws securing the WLAN card to the m otherboard. The card pops up automatically. 3. Remove the WLAN card at a 45 d[...]

4 Replacement Procedures 4.14 Bluetooth Module 4.10 WWAN Card Removing the WWAN Card Remove the WW AN card according to the following procedures and Figure 4.20. 1. Disconnect two antenna cables from the WW AN card. 2. Remove the two M2x3 screws securing the WW AN card. The card pops up automatically. 3. Remove the WW AN card at an angle of 45 degr[...]

4.14 Bluetooth Module 4 Replacement Procedures 4.11 IO Board Removing the IO Board Remove the IO board according to the following procedures and Figures 4.21 and 4.22: 1. Remove the two M2x3 screws securing the IO board to the logic lower assembly. 2. Raise the IO board from the back edge, as shown in Figure 4.21. M2x3*2 Figure 4.21 Removing the IO[...]

4 Replacement Procedures 4.14 Bluetooth Module 3. Lift the IO board up to an angle and then remove it from the logic lower assem bly. Take care to disengage the connectors from their respective ports without damaging them . Figure 4.22 Sliding out the IO Board Installing the IO Board Install the IO board according to the following procedure: 1. Ins[...]

4.14 Bluetooth Module 4 Replacement Procedures 4.12 Minicard Brackets Removing the Minicard Brackets There are two minicard brackets on the logic lower assembly. Rem ove each of the minicard brackets according to the following procedures and Figures 4.23 and 4.24: 1. Remove one M2x3 screw securing the minicard bracket to the logic lower assem bly, [...]

4 Replacement Procedures 4.14 Bluetooth Module 2. Remove one M2x3 screw securing the minicard bracket to the logic lower assem bly as shown in Figure 4.24. M2x3*1 Figure 4.24 Removing the minicard bracket 2 Installing the Minicard Brackets Install the minicard brackets according to the following procedures: 1. Seat the minicard bracket in the corre[...]

4.14 Bluetooth Module 4 Replacement Procedures 4.13 HDD Board Removing the HDD Board Remove the HDD board according to the following procedures and Figure 4.25: 1. Disconnect the HDD board cable from the motherboard and rem ove the two M2x3 screws securing the HDD board to the logic lower assembly, as shown in Figure 4.25. M2x3*2 Figure 4.25 Removi[...]

4 Replacement Procedures 4.14 Bluetooth Module 4.14 Bluetooth Module Removing the Bluetooth Module Remove the Bluetooth module according to the following procedure and Figure 4.26: 1. Disconnect the Bluetooth cable from the mother board and then remove the Bluetooth m odule. Figure 4.26 Removing the Bluetooth module Installing the Bluetooth Module [...]

4.14 Bluetooth Module 4 Replacement Procedures 4.15 RGB Board Removing the RGB Board Remove the RGB board according to the following procedures and Figure 4.27: 1. Disconnect the RGB board cable and remove one M2x3 screw securing the RGB board to the logic lower assembly, as shown in Figure 4.27. 2. Lift the RGB board at an angle and then remove it[...]

4 Replacement Procedures 4.14 Bluetooth Module 4.16 Display Assembly Removing the Display Assembly Remove the display assembly according to the following procedures and Figure 4.28. 1. Peel back the tape on the LVDS cable and disconnect it from the motherboard. Pull the LVDS cable out from the routing channel on the logic lower assembly. 2. Remove [...]

4.14 Bluetooth Module 4 Replacement Procedures 4.17 Motherboard Removing the Motherboard Remove the motherboard according to the following procedures and Figure 4.29: 1. Disconnect the speaker cable and LED cable from the motherboard as shown in Figure 4.29. 2. Pull the DC-in connector upward and disengage it from the port. 3. Remove the two M2x4 s[...]

4 Replacement Procedures 4.14 Bluetooth Module Installing the Motherboard Install the motherboard according to the following procedures and Figure 4.30. 1. Seat the motherboard in the correct position and secure it with two M2x4 screws as shown in figure 4.30. 2. Connect the speaker cable and LED cable to the motherboard as shown in Figure 4.30. 3.[...]

4.14 Bluetooth Module 4 Replacement Procedures 4.18 LED Cable and LED Board Removing the LED Cable and Board Remove the LED cable and LED board according to the following procedures and Figures 4.31 and 4.32. 1. Disconnect the LED cable from the LED board as shown in Figure 4.31 and remove it. Figure 4.31 Disconnecting the LED cable Satellite T210/[...]

4 Replacement Procedures 4.14 Bluetooth Module 2. Depress the catches as shown in Figure 4.32 and remove the LED board. Figure 4.32 Removing the LED board Installing the LED Cable and LED Board Install the LED cable and LED board according to the following procedures. 1. Seat the LED board on the logic lower assembly and snap it into place. 2. Conn[...]

4.14 Bluetooth Module 4 Replacement Procedures 4.19 Speakers Removing the Speakers Remove the speakers according to the following procedures and Figure 4.33. 1. Peel up the tape and free the speaker cables from the channels. 2. Pry up the speakers as shown in Figure 4.33 and remove them. Figure 4.33 Removing the speakers Installing the Speakers Ins[...]

4 Replacement Procedures 4.14 Bluetooth Module 4.20 Thermal Module Removing the Thermal Module Remove the thermal m odule according to the following procedures and Figures 4.34 and 4.35. CAUTION: When removing the thermal module, keep in mind that he thermal module can become very hot during operation. Be sure to let it cool down before starting th[...]

4.14 Bluetooth Module 4 Replacement Procedures 2. Turn over the motherboard assembly and rem ove the four M2x4 screws in the order shown in Figure 4.35. M2x4*4 Figure 4.35 Removing the four screws from the thermal module 3. Remove the thermal m odule from the m otherboard. Installing the Thermal Module CAUTION: When installing the thermal module, k[...]

4 Replacement Procedures 4.14 Bluetooth Module Install the thermal module according to the following procedures. 1. Apply Shinetsu 7762 grease on the thermal module as shown in Figure 4.36. If you are installing a new CPU thermal module, rem ove the release papers on the thermal pads first. Thermal Grease Thermal Pad Figure 4.36 Applying Shinetsu 7[...]

4.14 Bluetooth Module 4 Replacement Procedures 3. Turn over the motherboard assembly. Seat the therm al fan in the correct position and secure with one M2x4 screw. Connect the thermal fan cable, as shown in Figure 4.38. M2x4 Figure 4.38 Connecting the thermal fan cable to the motherboard Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-45[...]

4 Replacement Procedures 4.14 Bluetooth Module 4.21 LCD Bezel Removing the LCD Bezel Remove the LCD bezel according to the following procedures and Figures 4.39 and 4.40. 1. Remove the two screw rubbers on the LCD bezel. 2. Remove the two M2x6 screws securing the LCD bezel to the LCD cover assembly. 3. Use your fingers to pry up the LCD Bezel from [...]

4.14 Bluetooth Module 4 Replacement Procedures 4. Work your way along the top and bottom inside edges of the LCD bezel until it is free of the LCD cover assembly, as indicated in Figure 4.40. Figure 4.40 Removing the LCD bezel 5. Remove the LCD bezel. Installing the LCD Bezel Install the LCD bezel according to the following procedures. 1. Place the[...]

4 Replacement Procedures 4.14 Bluetooth Module 4.22 LCD Module Removing the LCD Module Remove the LCD module to the following procedures and Figures 4.41 and 4.42. 1. Remove the six M2x4 screws securing the LCD panel to the LCD cover assembly, as shown in Figure 4.41. M2x4*6 Figure 4.41 Removing the LCD panel Satellite T210/T215/Pro T210/Pro T215 M[...]

4.14 Bluetooth Module 4 Replacement Procedures 2. If there is a piece of tape covering the connector, peel it up. Disconnect the camera cable as shown in Figure 4.42. Figure 4.42 Disconnecting the camera cable 3. Remove the four M2x3 screws securing the LCD hinges to the LCD panel in order as shown in Figure 4.43 and remove the LCD hinges. M2x3*4 F[...]

4 Replacement Procedures 4.14 Bluetooth Module 4. Turn the LCD module over and place it face down on a protective surface, such as a foam pad. 5. Gently peel the clear connector tape from the back of the LCD panel and disconnect the LVDS cable connector. 6. Carefully peel the LVDS cable from the back of the LCD panel. Figure 4.44 Removing the LVDS [...]

4.14 Bluetooth Module 4 Replacement Procedures Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-51 Installing the LCD Module Install the LCD module according to the following procedures. 1. Connect the LVDS cable to the LCD panel connector, and adhere the clear tape to the back of the LCD panel. 2. Align the LCD hinges with the LCD panel [...]

4 Replacement Procedures 4.14 Bluetooth Module 6. Camera Module Removing the Camera Module Remove the camera m odule according to the following procedures and Figure 4.45. 1. Gently pry up the camera as shown in Figure 4.45. 2. Pull the WLAN antennas out from channels and rem ove them from the LCD cover. Figure 4.45 Prying up the camera Installing [...]

4.14 Bluetooth Module 4 Replacement Procedures 4.23 WLAN Antennas Removing the WLAN Antennas Remove the WLAN antennas according to the following procedures and Figure 4.46. 1. Peel the bases of the WLAN antennas up from the LCD cover as shown in Figure 4.46, taking care not to damage the aluminium foil on the LCD cover. 2. Pull the WLAN antennas ou[...]

4 Replacement Procedures 4.14 Bluetooth Module Installing the WLAN Antennas Install the WLAN antennas according to the following procedures and Figure 4.47. 1. Adhere the bases of the white and black WLAN antennas to the LCD cover. Note that the white antenna is in the top left corner and the black antenna is in the top right corner of the LCD cove[...]