Toshiba MW30G71 manual

[...]

2 Introduction Dear Customer , T hank you for purchasing this T oshiba TV . T his manual will help you use the many exciting features of your new T V . Befor e operating the TV , please read this manual completely , and keep it nearby for future reference. Saf ety Pr ecautions WAR N I N G TO R E D UCE TH E R I SK O F FIRE OR EL E C T RIC SH OC K, D[...]

3 Introduction[...]

4 Introduction IMPOR T ANT SAFEGU ARDS S 24) Always operate this equipment from a 120V AC, 60 Hz power source only. 25) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surge s and built-up static charge s (see Section 8 10 of the National Electric Code). 26) DAN G E R: R IS K OF S E RI OU S PE[...]

5 Introduction SAFETY PRECA UTION/ P ower sour ce CA UTION: THIS DIGIT AL VIDEO PLA YER EMPLO YS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PR ODUCT , PLEASE READ THIS OWNER'S MANU AL CAREFULL Y AND RET AIN FOR FU- TURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTE- NANCE, CONT ACT AN A UTHORIZED SERVICE LOCA TION. USE OF CONTROLS , ADJUSTMENTS [...]

Introduction 6 Precautions Notes on handling When shipping the unit, the original shipping car ton and packing materials come in handy . For maximum protection, repack the unit as it was originally packed at the factory . Do not use volatile liquids , such as insect spray , near the unit. Do not leave rubber or plastic products in contact with the [...]

Introduction 7 Contents Introduction IMPOR T ANT SAFEGU ARDS ........................... 2 SEFETY PRECAUTIONS ................................ 5 Power source ................................................... 5 Precautions ...................................................... 6 Contents ........................................................... [...]

Introduction 8 Structure of disc contents Normally , D VD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and A udio CDs are divided into tracks. D VD video disc Video CD/Audio CD Each title, chapter or trac k is assigned a number , which is called “title n umber”, “chapter number” or “track n [...]

Introduction 9[...]

Introduction 10 Notes and information (continued) This unit can play the f ollowing cards . Pla yab le Media cards Notes on Media car ds • Ensure that you insert the Media card correctly into the media card slot. • Ne ver remov e the Media card or tur n off the unit while using the Media card. Doing so ma y result in loss of data or damage to t[...]

Introduction 11[...]

Introduction 12 Identification of controls (continued) Remote control The instructions in this manual describe the function on the remote control. See the page in for details . *D VD MENU button Use the D VD MENU button to displa y the menu included on many D VD video discs. To operate a menu, f ollow the instructions in “D VD menu. ” 5U30101B [...]

Introduction 13 Operation: • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a distance of approx. 5 meters. Replace the compar tment cov er . Install two “AAA” batteries (sup- plied), paying attention to the polarit[...]

14 Connections[...]

15 Connections For basic cable TV service not requiring a converter/ descrambler box, connect the cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the unit. 75 ohm coaxial cable If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box,[...]

16 Connections Connecting to optional equipment Before connecting the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet bef ore making any connections. Y ou can enjoy the TV game, camcorder or high quality dynamic sounds of D VD video discs or audio CDs by connecting the unit to optional aud[...]

17 Connections Connecting an HDMI™ device to the HDMI input The HDMI [1] input on your unit receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI [2] device. This input is designed to accept HDCP [3] program material in digital form from EIA/CEA-861/861B–compliant [4] consumer electro[...]

18 Connections[...]

19 Connections[...]

20 Basic setup Press PO WER. The starting setup function begins and the Language setup menu appears on the screen. Press or to select y our desired language , then press ENTER. Starting setup The STARTING SETUP function makes installing your unit easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically. [...]

21 Basic setup • Depending on the reception condition, it may take approx. thirty minutes. • The POWER indicator will light. Clock setting The auto clock function will automatically set the b uilt-in clock (Month, Da y , Y ear and Time) when the unit is connected to an antenna or cab le system and it is turned off. As the unit searches f or a r[...]

22 Basic setup Press MENU in the TV/VCR mode, then press or to select TV SETUP menu. 1 Press or to select “ST AND ARD TIME” , then press . 2 Press or t o select your time zone, then press ENTER. 3 Press RETURN to make the menu screen disappear . 4 In the rare e vent that y ou live within broadcast range of two stations in two diff erent time zo[...]

23 Basic setup Manual c lock setting Y ou must set the date and time manually for timer recordings , ON/OFF timer and daylight sa ving time if the auto clock process did not set them correctly . Notes: • After a power f ailure or disconnection of the po wer , the timer settings will be lost. In this case, reset the present time. • When you set [...]

24 TV/VCR 8:47 AM MON Hi-Fi FULL DIGITAL TRACK STEREO 00:15:12 SP Press or to select the desired language: English (ENGLISH), French (FRANÇAIS) or Spanish (ESPAÑOL). 3 Press MENU in the TV/VCR mode, then press or to select TV SETUP menu. 1 Press RETURN to make the menu screen disappear . 4 Setting the language/ TV/VCR operation status Setting the[...]

25 TV operation TV operation Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. Set the TV/CA BLE selection to the appropriate position 28 . 1 2 3 Press Direct cha[...]

26 ■ CHANNEL UP/DOWN Press and release CH or . The channel auto- matically stops at the ne xt channel set into memor y . F or proper oper ation, before selecting channels, the y should be set into the memor y . See “T o memor iz e channels” 28 . ■ CHANNEL RETURN This button allows you to go back to the last channel selected by pressing CH R[...]

27 TV operation Closed captions Captions: This closed caption mode will display te xt on the screen in English or another language (depending on the setting of the closed captions CH 1/2). Generally , closed captions in English are transmitted on captions channel 1 and closed captions in other lan- guages are transmitted on captions channel 2. Te x[...]

28 Select the desired channel to be added or deleted using Direct channel selection buttons (0–9) or CH or . 2 Press MENU in the TV/VCR mode, then press or to select TV SETUP menu. Press or to select “TV/CABLE”. 1 2 Press RETURN to make the menu screen disappear . 4 Press or to select “TV” or “CABLE”. 3 TV - VHF/UHF channels CABLE - C[...]

29 TV operation Repeat steps 1-4 for up to 12 channels. Programming your favorite c hannels You can preset up to 12 of your favorite channels using the Favorite Channel Programming feature. Because this feature scans through only your favorite channels, it allows you to skip other channels you do not normally watch. Press MENU in the TV/VCR mode, t[...]

30 TV operation Labeling channels/Labeling the video input sources Channel labels appear above the channel number display each time you watch the TV, select a channel, or press DISPLAY . You can choose any four characters to identify a channel. The video label feature allows you to label each input source for your TV. Labeling channels Select a cha[...]

31 TV operation Press MENU in the TV/VCR mode, then press or to select LOCKS menu. To register passw ord Notes: • If you f orget the passw ord, you cannot set the V -Chip. •T o av oid forgetting the pass word, write it down and keep in the safe place. Press or to display the password entering mode. 1 2 Enter the same password again using Number[...]

32 TV operation Press or to select “V-CHIP”. 3 To set the V -Chip OFF : TV RA TING is not set TV -Y : All children TV -Y7 : 7 years old and above TV -G : General audience TV -PG : Parental guidance TV -14 : 14 years old and above TV -MA : 17 years old and above When you select TV - Y7, TV -PG, TV -14 or TV -MA, press DISPLA Y to show the contai[...]

33 TV operation Repeat steps 1 through 5 to lock other channels. Press or to select “SET”, then press ENTER. If you returen to LOCKS menu, select “LOCKS MENU” them press . Locking the channels 1 With the CH LOCK feature , you can lock specific channels . Y ou will not be able to tune loc ked channels unless you clear the setting. Y ou can c[...]

34 TV operation ENTER / / / Press MENU in the TV/VCR mode, then press or to select LOCKS menu. Press or to display the password entering mode. Use the Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. 1 2 Locking the video inputs/ Setting the GameT imer ™ With the VIDEO LOCK feature, you can lock out the input[...]

35 TV operation Y ou can lock the front panel buttons to pre vent your settings from being changed accidentally (by children, f or example). When the front panel lock is in ON, all control b uttons on the unit’ s front panel (except PO WER) do not operate. Using the front panel lock f eature Using the front panel loc k feature 1 Press MENU in the[...]

36 TV operation[...]

37 TV operation To set the off timer To set the of f timer This f eature allows you to hav e the unit turn off automatically at a predetermined time. If you program the OFF TIMER once, the unit will automatically turn off at the same time ev er yday . EXAMPLE: Tu r ning off the TV at 11:30 PM. Press or to select “ONCE” or “D AIL Y” 5 Press [...]

38 TV operation After your desired setting, press RETURN to make the menu screen disappear . Press or to select the item you want to adjust, then press or to adjust the setting. 1 2 Press MENU in the TV/VCR mode, then press or to select PICTURE menu. After your desired setting, press RETURN to make the menu screen disappear . 3 Note: The CONTRAST d[...]

39 TV operation CableClear ® reduces visib le interference in y our TV picture. This is useful when receiving a broadcast with a weak signal (espe- cially a Cable channel) or playing a video cassette or disc damaged by repeated use . Change the picture quality by selecting from three preset color temperatures—cool, medium, and warm. Using the Ca[...]

40 TV operation[...]

41 TV operation[...]

42 TV operation Selecting the picture size (continued) You can view 480i and 480p format programs in a variety of picture sizes—Natural, TheaterWide 1, TheaterWide 2, TheaterWide 3, and Full. The way the image displays in any of the picture sizes will vary depending on the format of the program you are viewing. Select the picture size that displa[...]

43 TV operation[...]

44 TV operation Stereo and Second A udio Program (SAP)/ Sound control adjustment The unit is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters [...]

45 TV operation Selecting the HDMI audio input source/ Resetting your audio adjustments See page 17 for details on connecting an HDMI or a D VI device to the TV’ s HDMI input. If you connect a D VI de vice, to hear audio you must also connect the analog audio cab les to the HDMI audio IN jacks (see page 17.) Set the HDMI audio input setting to ?[...]

46 Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape. To record again Screwdriver Automatic tape eject This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded [...]

47 Playback (VCR)[...]

48 Playback (VCR) Special playbac k Picture search Reverse picture search function Press REV once or twice during the playbac k. Forward picture search function Press FF once or twice during the playback. To return to playback, press PLAY . Press PAUSE/STILL during playback. To resume normal playback, press PLAY or PAUSE/STILL . If the still pictur[...]

49 Playback (VCR) To star t the pla yback, press PLA Y . The pla yback will be repeated endlessly . Press RETURN to make the menu screen disappear . If you press DISPLA Y , “ ” will appear on the screen 24 . Con venient function To cancel repeat mode : In step 3 above , press or to select “OFF” position. Press RETURN to make the men u scree[...]

50 Playback (VCR) Press ZERO RETURN. The tape will rewind and automatically stop at the “00:00:00” position. 5 Zero return function Press DISPLA Y . 1 Before playback or recording, press COUNTER RESET to set the counter to “00:00:00”. 2 Begin playback or recording. 3 Press ST OP . 4 The zero return function provides a conv enient method of [...]

51 Recording (VCR) Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. Note: The pause function will be released after 5 minutes to prevent damage to the tape or the unit. The unit will change to the STOP mode. To stop recording temporaril y This VCR will automatically rewind the tape when the tape has ended (except dur[...]

52 Recording (VCR) One-touch timer recording (OTR) Press once twice 3 times 4 times 5 times NORMAL REC 0:30 1:00 1:30 2:00 3:00 4:00 5:00 6:00 NORMAL REC Recording time Press 6 times 7 times 8 times 9 times 10 times Recording time Load a cassette tape with the erase prevention tab intact. The unit will automatically turn on. Example: One-touch time[...]

53 Recording (VCR) T imer recording Timer recording can be progr ammed on-screen with the remote control. The built-in timer allo ws automatic unattended recording of up to 8 programs within 1 month. Timer recor ding Notes: • Press to move cursor backward for correction. • To record from external source set the channel to “L1” or “L2”. [...]

54 Recording (VCR) To set daily/weekly timer The current day (Friday) SUN-SAT (Sunday to Saturday) MON-SAT (Monday to Saturday) MON-FRI (Monday to Friday) WKL-WED WKL-THU (Weekly Thursday) (Weekly Wednesday) One month later minus one day Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.g. MON-SAT: Monday to Saturday) Timer recording Follow the proce[...]

55 Other functions (VCR) Duplicating a video tape If you connect the unit to another VCR or Camcorder , you can duplicate a previously recorded tape . Make all connections bef ore turning on the power . Duplicating a video tape For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical[...]

56 Other functions (VCR) Duplicating a DVD or CD disc Press SPEED to select the desired tape speed SP or SLP . Preparation: • Press TV/VCR to select the TV/VCR mode. • Load a cassette tape with the erase prevention tab intact. • Load a DVD/CD disc. 1 Press DVD to select the DVD mode. 2 Press PLA Y to star t playbac k. 3 Press REC to start rec[...]

57 Basic playbac k (D VD) Press OPEN/CLOSE or PLA Y . The disc tra y closes automatically . On the TV -screen, “ ” changes to “Reading Disc” and then playbac k commences. Press ST OP to end playback. 3 Resuming facility • The unit records the stopped point, depending on the disc. “ ” appears on the screen. Press PLA Y to resume playba[...]

58 Basic playbac k (D VD) To pause playback (still mode) Press PA USE/STILL during playback. To resume normal playbac k, press PLA Y . • The sound is muted during still mode. To stop playback Press STOP . To remove the disc Press OPEN/CLOSE . Remove the disc after the disc tray opens completely . Be sure to press OPEN/CLOSE to close the disc tra [...]

59 Basic playbac k (D VD) Playing frame by frame Playing in fast reverse or fast forward directions Press REV or FF during playbac k. REV :F ast rev erse playback FF :F ast f orward playbac k Each time you press REV or FF , the playback speed changes. To resume normal playback Press PLA Y . Notes: • The unit mutes sound and subtitles during rev e[...]

60 Adv anced playback (D VD) Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode press ZOOM repeatedly to return to a 1:1 view ( Off). Press JUMP during playback or stop mode. Press or to select the “Time”, “Title” or “Chapter”. Press N[...]

61 Adv anced playbac k (DVD) [Audio CD, Video CD, MP3/WMA/JPEG CD] Press D D D D D to select “Repeat”. Press B B B B B / A A A A A to select “Track” or “All”. The unit automatically star ts repeat playbac k after finishing the current track. • If you set the repeat mode during stop mode, press PLA Y to star t Repeat playbac k. 1 Press[...]

62 Adv anced playback (D VD) Program playback/Random playbac k You can arrange the playback order of tracks or files on the disc. And also the unit selects tracks or files at random and playback them. These feature works for Audio CD and Video CD. ENTER ▲ / ▼ / / PLA Y MODE 0–9 CANCEL Program playback VC D CD Press PLAY MODE in the stop mode.[...]

63 Adv anced playbac k (DVD) Changing angles ANGLE ENTER ▲ / ▼ / / T OP MENU PLA Y DVD MENU Title selection DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. 1 Press ANGLE repeatedly until the desired ang[...]

64 Adv anced playback (D VD) 1 2 Press AUDIO SELECT during playback. The current soundtrack language will appear. Press A UDIO SELECT repeatedly until the desired language is selected. • The on screen display will disappear after a few seconds. Changing soundtrack language/ Subtitles You can select the language when you play a multilin- gual disc[...]

65 Adv anced playbac k (DVD) Disc status/T o turn of f the PBC With each press of DISPLA Y , the status of the disc will appear on the screen and change as follows. DVD To make status displa y disappear , press DISPLA Y again. Video CD When you playback the CD disc, the status display will appear on the screen and continue displaying. 00:34:56 01:1[...]

66 Adv anced playback (D VD) MP3/WMA/JPEG file information Limitations on MP3/WMA/JPEG file playback • MP3/WMA/JPEG file is the disc/card that is standardized b y ISO9660, its file name must include 3-digits extension letters, “mp3”, “wma”, “jpg”. • MP3/WMA/JPEG file must be correspond to the ISO standardized files . • This unit c[...]

67 Function playbac k (D VD) Press C C C C C / D D D D D / B B B B B / A A A A A or Number buttons (0–9) to se- lect the desired file. • In case the folder includes more than 15 files, press B B B B B or A A A A A to display next file list. • When PLA Y has been pressed after displa ying the file menu, or when the disc tra y has been closed u[...]

68 Adv anced playback (D VD) T OP MENU ▲ / ▼ / / ENTER 0–9 The slide show enab les you to view pictures (files) one after another automatically . Preparation: Set “JPEG Inter val” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” . Place a CD-R/RW on which JPEG files have been recorded onto the disc tray, or insert a Media [...]

69 Function setup (D VD) Setting procedure Press SETUP during stop mode. The following on-screen display appears. 1 2 3 To make SETUP screen disappear , press SETUP or RETURN. 5 Customizing the function settings You can change the default settings to customize performance to your preference. ENTER C / D / B / A • Repeat steps 3 and 4 to change ot[...]

70 Function setup (D VD) Customizing the function settings (continued) Section Option Menu Subtitle A udio TV Screen Display Picture Mode JPEG Interval DRC P ass wor d Parental Select Files Details To select the language of “Menu”, “Subtitle” and “Audio” if more than one language are availab le on the disc. To select a picture size acco[...]

71 Function setup (D VD) Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list” 75 ). Original: (Audio) The u[...]

72 Function setup (D VD) Customizing the function settings (continued) Picture Mode There are two types of source content in pictures re- corded in DVD video discs: film content (pictures re- corded from films at 24 frames per second) and video content (video signals recorded at 30 frames per sec- ond). Make this selection according to the type of [...]

73 Function setup (D VD) Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1) Press C or D to select “Parental”, then press B or A until the le vel you require appears . • Le vel Off: The parental control setting does not function. • Le vel 8: All D VD soft[...]

74 Function setup (D VD) Load a DVD disc and press PLAY or OPEN/ CLOSE . If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading Disc” screen will change, depend- ing on which disc is played. If you select “YES” with the ENTER key, “Your disc exceeds the parental control level#.” s[...]

75 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” . Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Af ar 1111 Finnish 1619 Lithuanian 2230 Slov ak 2921 Afrikaans 1116 F rench 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 F r isian 1635 Malagasy 2317 Somal[...]

76 Others Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the unit is connected to a cable TV system, the disturbance may be caus[...]

77 Others Tr oubleshooting Check the following guide for the possible cause of a problem before contacting service. SYMPT OMS CA USE POSSIBLE SOLUTIONS PA G E Tr y another channel. Check picture control adjustments . Check f or source of reception distur- bance. Check CABLE connection or VHF/UHF antenna, reposition or rotate antenna. Tr y another c[...]

78 Others The video cassette's erase pre vention tab is broken off . The time is not set correctly . The recording start/end time is not set correctly . The TIMER REC button ha ve not been pressed (the TIMER REC indicator is not lit). T ape is old or wor n. Tr acking adjustment is bey ond range of automatic tracking circuit. Video heads are di[...]

79 Others Specifications * Screen size is appro ximate. • This model complies with the abov e specifications. • Designs and specifications are subject to change without notice. • This model may not be compatib le with features and/or specifications that ma y be added in the future. MW26G71 MW30G71 General Power supply Power consumption Operat[...]

80 T oshiba America Consumer Products, L.L.C. (“T ACP”) mak es the follo wing limited warranties to original con- sumers in the United States. THESE LIMITED W ARRANTIES EXTEND T O THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TV COMBINA TION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND T O NO O THER PURCHASER OR TRANSFEREE.[...]

81 Others How to Obtain W arranty Service If, after following all of the operating instructions in this manual and reviewing the section entitled “T roubleshooting, ” you find that service is needed: (1) T o find the nearest T ACP A uthorized Ser vice Station, visit T A CP’ s website at www .tacp.toshiba.com/ service or contact T ACP’ s Con[...]

82[...]

83 Others ................................................................................................................................... ................................................................................................................................... ............................................................................[...]

Printed in Thailand CableClear , ColorStream and TheaterWide are registered tr ademarks of T oshiba America Consumer Products, L.L.C. GameTimer is a trademark of T oshiba Amer ica Consumer Products, L.L.C . 5U30101B [E]p80-Back 4/1/05, 3:29 PM 84[...]