Toshiba IK-WR01A manual

For inf ormation on the latest products and per ipheral de vices, ref er to the follo wing W eb page. ■ http://www .netcam.toshiba.com The abov e URL is subject to change without prior notice. If the URL changes, ref er to the T oshiba website (http://www .cctv .toshiba.com). This User’ s Guide applies to the firmware version R1.01 and later . [...]

2 Installation/Set up Viewing and Operation Recording Setting up Others Be sure to read “IMPORT ANT SAFEGUARDS” in the separate “Safety Precautions.” Important Safety Instructions[...]

3 Installation/Set up Viewing and Operation Recording Setting up Others ● Impor tant Safety Instructions .................................................................................. 2 ● INTRODUCTION .................................................................................................... 3 ● FEA TURES & DESCRIPTION ......[...]

4 Installation/Set up Viewing and Operation Recording Setting up Others Viewing and Operation ● Viewing ................................................................................................................. 34 ● Viewing Images ................................................................................................. 34 • Cam[...]

5 Installation/Set up Viewing and Operation Recording Setting up Others LL ON OFF BLC Mode Setting Switch BLC ( Backlight Compensation Switch ) With the switch on, it adjusts the backlight automatically to obtain the best possible image. LL Sets camera synchronization to line lock with the switch on. Available only with AC24V. Lens Iris ADJ Monitor[...]

6 Installation/Set up Viewing and Operation Recording Setting up Others INTRODUCTION (Cont.) Ethernet Port Connect a LAN cable to the port. A PoE compatible hub is also supported. RJ45 Connector (Option) Video Out Jack Connect a video monitor to the video output jack. AC24V/DC12V Power Plug Terminal Connect an AC24V/DC12V power plug to the terminal[...]

Installation/Setup ● Connecting to a Video Monitor ● Line-Lock Control ● Adjusting a Lens ● Setting Up the Network Camera Environment ● Connecting the Camera and Personal Computer by Network ● Using the Camera Search Application “Camera Finder” ● Changing Administrator Login ID and Password ● Setting up Access Restriction ● Co[...]

8 Installation/Set up Viewing and Operation Recording Setting up Others ● Connect the cable of the camer a and the cable from the designated pow er supply with respective connectors . ● Screws f or securing the camera and mounting base to the ceiling or wall are not supplied with the unit. Use appropriate screws . NO TE • The weight (camera b[...]

9 Installation/Set up Viewing and Operation Recording Setting up Others Tilt rotation Tilt Lock Pan Lock Focus lock lever FAR ∞ NEAR WIDE TELE Zoom lock lever Pan Transport Protection Screws (silver) Horizontal rotation a a To obtain a level image, turn the Horizontal Adjustment Ring. Remove three silver transport protection screws. a a 1 2 5 Hor[...]

10 Installation/Set up Viewing and Operation Recording Setting up Others The lens tilt angle can be adjusted by loosening the tilt lock 2 . After adjusting, tighten the tilt lock 2 . Adjust the zoom position by loosening the zoom lock lever 3 . After adjusting, tighten the zoom lock lever 3 . When installing the camera on a wall, manipulate the hor[...]

11 Installation/Set up Viewing and Operation Recording Setting up Others Installing the Camera Unit ■ Installation to W all or Ceiling with Mounting Base (Surface Mount Installation) A B C D Mounting Base Mounting Base center Drain groove Mounting Base center Drain groove A C B D , Wall or Ceiling , Junction Box Align to this mark. In case of usi[...]

12 Installation/Set up Viewing and Operation Recording Setting up Others ■ Installation to Junction Box with Bracket (Flush Mount Installation) 83.5 mm (3.29inch) 46 mm (1.81inch) Screws (not supplied) x4 Screws x3 Bracket Mount camera base with three supplied screws B. (Shorter screw(M4x10)) Tighten and lock the screws firmly. Align the marks. A[...]

13 Installation/Set up Viewing and Operation Recording Setting up Others ■ Change of Dome Cover Screws (x3) Retainer plate Put the protruding side downward. The protruding portion should be set in the groove of the shock damper. Shock damper cushion Note the direction of the damper cushion. The groove should be face up. Dome cover Gasket Top cove[...]

14 Installation/Set up Viewing and Operation Recording Setting up Others Connecting to a V ideo Monitor Connecting to a V ideo Monitor Y ou can view camera images on the video monitor . Important ● Power plugs of connected equipment must be disconnected before installation. ● A 75-ohm coaxial cable (3C-2V or 5C-2V) is required f or standard con[...]

15 Installation/Set up Viewing and Operation Recording Setting up Others About the POWER SELECT Switch ■ When power is supplied from a PoE compatible hub, etc. ■ When power is supplied from an AC24V or DC12V power source PO WER SELECT Switch PoE (IEEE802.3af) compatible hub, etc. LAN cable Switch the PO WER SELECT switch to P oE. AC24V/ DC1 2V [...]

16 Installation/Set up Viewing and Operation Recording Setting up Others Line-Lock control ● Matching the vertical synchronization with the power frequency is called the Line-Loc k. ● This function is activated when the LL of Mode Setting Switch is on. ● When two or more cameras are s witched by video s witcher f or viewing by a monitor TV , [...]

17 Installation/Set up Viewing and Operation Recording Setting up Others Line Lock V PHASE CONTROL ■ LINE LOCK PHASE When a video switcher s witches two or more camer as, the picture ma y fluctuate on the video monitor due to the diff erent AC line phase of each camera. In this case, adjust the V PHASE controller to get a stable image . NO TE ●[...]

18 Installation/Set up Viewing and Operation Recording Setting up Others Back Light Compensation By turning on the back light compensation s witch, the camera controls the back light automatically to ensure proper e xposure in the specified area when using an auto iris lens or fix ed ir is lens with the “ AES ” mode . For setting the metering a[...]

19 Installation/Set up Viewing and Operation Recording Setting up Others NO TE ● When there is a large diff erence in contrast between the subject and the surrounding (e.g. when the background is e xtremely bright), the BLC effect ma y be limited. Auto White Balance (A WB) The camera has an auto white balance capability in the range of 2,500K to [...]

20 Installation/Set up Viewing and Operation Recording Setting up Others Setting Up the Network Camera Environment Requirements for Network Camera Monitoring System ° Administrator ’ s personal computer This manual ref ers to a personal computer that has been granted all privileges f or configuring, operating, monitoring, and other operations as[...]

21 Installation/Set up Viewing and Operation Recording Setting up Others Connecting the Camera and Personal Computer by Network ■ About the IP Address T o connect to the network, the administrator needs to set the network camera IP address. There are two options to set the IP address. • Obtaining an IP address automatically from the DHCP server[...]

22 Installation/Set up Viewing and Operation Recording Setting up Others Connecting the Camera and Personal Computer by Network (Cont.) Structure of Connection The f ollowing are two methods of connecting the network camera: • Use a crossov er cable • Connect with a hub or router ● Using a crossov er cable to estab lish a connection (example)[...]

23 Installation/Set up Viewing and Operation Recording Setting up Others Connecting Connect a LAN cable and then turn the power on. Connect the LAN cable (str aight) leading to the camera with a powered hub . Alternatively , use a LAN cable (crossov er) to connect the camera with the powered personal computer . ● When connecting a P oE compatible[...]

24 Installation/Set up Viewing and Operation Recording Setting up Others Using the Camera Search Application “Camera Finder” The camera search application “Camera Finder” is an application that searches f or network cameras. Install this application from the supplied CD-ROM. ● Setting up “Camera Finder” Insert the supplied CD-ROM into[...]

25 Installation/Set up Viewing and Operation Recording Setting up Others Click the “ User ” button. ● Click the “ User ” button to connect to the netw or k camera from “ Camera Finder . ” ● The browser starts up and then the “ Camera Windo w ” screen appears. T o close the window without logging in Click "Exit" button [...]

26 Installation/Set up Viewing and Operation Recording Setting up Others Changing Administrator Login ID and Password Be sure to change the def ault login ID and password. Y ou are able to change important inf or mation and settings of the camera through the Administrator Login. T o hav e higher security , be sure to change your login ID and the pa[...]

27 Installation/Set up Viewing and Operation Recording Setting up Others - Enter “ root ” in the Current login ID field and “ ikwb ” in the Current Password field. Enter a new login ID in the New login ID field and a new password in the New Password field and New Password (Confirm) field. ● Enter the same pass word in the New P ass word f[...]

28 Installation/Set up Viewing and Operation Recording Setting up Others Setting up Access Restriction Y ou can set up the access restr iction by requiring the user to enter the user ID and pass word for the Administrator login or the registered user ID and pass word. Click “ Configuration ” on the left side of the “ Camera Window ” screen.[...]

29 Installation/Set up Viewing and Operation Recording Setting up Others Click the “ Set/Change ” button. ● New user ID and pass word f or the User login are stored in the network camera. Check “ ON ” in the “ User authorization required ” section. Click the “ Set ” button. ● A screen appears, asking y ou to enter a user name an[...]

30 Installation/Set up Viewing and Operation Recording Setting up Others Configuring the Network Manually Y ou can change the settings of network connection manually . • Enter an IP address manually if y ou are not using, or do not want to use the DHCP ser ver . Log in as Administrator . Click “ Configuration ” on the left side of the “ Cam[...]

31 Installation/Set up Viewing and Operation Recording Setting up Others Select “ Manually . ” ● The def ault setting is “ A utomatically by DHCP . ” Fill in “ IP Address, ” “ Subnet Mask, ” “ Default Gateway , ” “ DNS1 ” and “ DNS2. ” Important ● If you do not kno w the subnet mask, consult the provider or network s[...]

32 Installation/Set up Viewing and Operation Recording Setting up Others[...]

Viewing and Operation ● Viewing ● Viewing Logs[...]

34 Installation/Set up Viewing and Operation Recording Setting up Others V iewing Viewing Images The images in the network camera can be displa yed with the Internet browser on the personal computer . Search for the network camera with the “Camera Finder” → Log into the camera. ● The browser starts up and then the Camera Window screen appea[...]

35 Installation/Set up Viewing and Operation Recording Setting up Others ■ Camera Window Screen Image on the camera Name of camera ( → page.57) Current date and time of camera ( → page 58) * Cannot be operated through the User login. ■ Menu that is displayed when right-clicking on the image T o record images ( → page.51) T o record curren[...]

36 Installation/Set up Viewing and Operation Recording Setting up Others V iewing (Cont.) Adjusting Images on the Camera Y ou can set up the image quality and resolution for the images on the camera. T o perform the operation, y ou need to log in as Administrator . When you log in as User , the operation is disabled. Adjust the settings in the Came[...]

37 Installation/Set up Viewing and Operation Recording Setting up Others ● Flick erless Y ou can set up the function to reduce the flickering caused by lighting such as fluorescent lights. On: T o activate the flic ker compensation Off: Not to activate the flic ker compensation (Def ault: Off) ● Area (BLC) Y ou can set up the target area for ba[...]

38 Installation/Set up Viewing and Operation Recording Setting up Others V iewing (Cont.) Adding Images Y ou can add and view images on the other camera. Enter the IP address of other camera in the “ W atching: ” field → Click “ Add. ” ● An image on the other camera is added on the Camer a Windo w screen. ● Up to 9 images can be displ[...]

39 Installation/Set up Viewing and Operation Recording Setting up Others Y ou can view a list of logs. T o perform the operation, you need to log in as Administr ator . When you log in as User , the operation is disabled. Click “ View log ” on the left side of the Camera W indow screen. ● A list screen of logs is displayed. ● For details on[...]

40 Installation/Set up Viewing and Operation Recording Setting up Others[...]

Recording ● About Recording Images ● Recording Images on FTP Server ● Recording Images on a Personal Computer[...]

42 Installation/Set up Viewing and Operation Recording Setting up Others Network camera can record images according to your need. Recordable media and its recordable contents are as f ollows. Recordable Media FTP Server P ersonal Computer Recordable Contents ● Data of “P er iodic FTP by Schedule” ● Data of “Motion Detection” ● Image d[...]

43 Installation/Set up Viewing and Operation Recording Setting up Others Recording Images on FTP Server By using FTP server , it becomes possible to manage periodic transf erring and saving of huge amounts of recorded image data. The recordab le images on an FTP ser ver include “P eriodic Recording Data by Schedule” or “Recording b y FTP by M[...]

44 Installation/Set up Viewing and Operation Recording Setting up Others Configure each setting items. ■ FTP General Settings Y ou can control the settings to connect to an FTP ser ver . ● FTP sever: Select either one of them below and enter correct inf ormation. • Ser ver Name • IP Address ● User ID: Only f or a user who has the r ight t[...]

45 Installation/Set up Viewing and Operation Recording Setting up Others NO TE • When selecting “ Periodic ” , network camera logs in to FTP server automatically a minute bef ore the scheduled recording star ts. When the scheduled recording stops, there ma y be some unsent image data left in the camera. The camer a will not log out from the F[...]

46 Installation/Set up Viewing and Operation Recording Setting up Others Recording Images on FTP Server (Cont.) ■ Periodic FTP by Schedule Y ou can control the settings to record images for P eriodic FTP by Schedule. T o r un the recording, select “ P eriodic ” in “ Connection to FTP Enable ” ( ➝ page. 43). 1) Configure recording schedu[...]

47 Installation/Set up Viewing and Operation Recording Setting up Others NO TE • The cycle may shift depending of Resolution (image siz e) and networking conditions. 4) Enter “ File Name ” ● Select one of two patterns, enter characters in the part descr ibed as (ke yword). File name will be shown lik e this: e.g. Pattern1: (ke yword) yy mm [...]

48 Installation/Set up Viewing and Operation Recording Setting up Others ■ FTP by Motion Detection Y ou can control the settings to record images for FTP by Motion Detection. ● T o configure the motion detection, select “ Enable ” in or “ Motion Detect ” in the alarm settings ( ➝ page. 64) ● T o run the recording, select “ Motion [...]

49 Installation/Set up Viewing and Operation Recording Setting up Others 4) Enter “File Name” ● Enter characters in the part descr ibed as (ke yword). File name will be shown lik e this: e.g. MD (keyword) yyyy mm dd HH MM SS ***N--A.JPG NO TE • Y ou cannot use these characters: / : ; , ” | ? * < > F ollowings are the meaning of ea[...]

50 Installation/Set up Viewing and Operation Recording Setting up Others File T ransfer Order • Basically , files are transferred in recorded order . Howe ver , files ma y not be transf erred depending on the conditions of networking or FTP server . (The camera will not bac kup data.) NO TE • Depending on the conditions of networking and the FT[...]

51 Installation/Set up Viewing and Operation Recording Setting up Others Recording Images on a Personal Computer Y ou can record images in the JPEG file or A VI file f or mat on a personal computer . Image Recording Feature Right-click on the image of the “ Camera Window ” screen. ● The operating menu appears on the screen. Click “ Image Re[...]

52 Installation/Set up Viewing and Operation Recording Setting up Others Specify the recording limit. Mark one of the items and enter the value in its field. Enter the recording interval. Click the “ Sav e As ” b utton → Select the destination directory . Enter the file name without the extension. Mark here to save images as an A VI file. Ent[...]

53 Installation/Set up Viewing and Operation Recording Setting up Others Recording Current Image Data as Still Image Right-click on the image of the “ Camera Window ” screen. ● The operating menu appears on the screen. Click “ Save Current Picture As. ” ● A screen appears, asking y ou to specify the destination folder and file name . Sp[...]

54 Installation/Set up Viewing and Operation Recording Setting up Others[...]

Setting up ● How to Set up ● System Settings ● User Settings ● Admin Settings ● Alarm Settings ● Network Settings ● Mail Settings ● FTP Client Settings ● DDNS Settings ● Updating the Firmware ● Saving the Settings on a Personal Computer[...]

56 Installation/Set up Viewing and Operation Recording Setting up Others How to Set up Only the Administrator is authorized to set up configur ations for the network camera. Y ou can select the setup items by clic king “Configur ation” on the “Camera Window” screen. General Configuration Click “Configuration” on the left side of the “[...]

57 Installation/Set up Viewing and Operation Recording Setting up Others System Settings Click “ Configuration ” on the left side of the “ Camera Window ” screen. • The Configuration menu appears on the left side of the screen. Click “ System ” on the left side of the screen. • The System setting screen appears on the right side of [...]

58 Installation/Set up Viewing and Operation Recording Setting up Others System Settings (Cont.) ● Setting up a format to display date/time 1) Select the “ Date-Time Displaying F ormat ” from the pull-do wn menu. • yyyy-mm-dd HH:MM:SS (e x. 2004-9-15 14:23:32) • dd Mmm yyyy HH:MM:SS (e x. 15 Sep 2004 14:23:32) • mm-dd-yyyy HH:MM:SS (e x[...]

59 Installation/Set up Viewing and Operation Recording Setting up Others ■ Rebooting the network camera Y ou can restar t the network camera. 1) Click “ Reboot IP Camera. ” A confirmation message appears, asking whether or not the camera should be rebooted. 2) Click “ OK. ” ■ Updating the Firmware Y ou can update the fir mware on the ne[...]

60 Installation/Set up Viewing and Operation Recording Setting up Others Click “ Configuration ” on the left side of the “ Camera Window ” screen. • The Configuration menu appears on the left side of the screen. Click “ User ” on the left side of the screen. • The User setting screen appears on the right side of the display . Config[...]

61 Installation/Set up Viewing and Operation Recording Setting up Others ● Storing the user name and password 1) Enter the user name, pass word and passw ord (confir m) for a ne w user in the field of “User ID , ” “P assword” and “Confirm, ” respectiv ely in “Add a user or change pass word. ” 2) Click the “Set/Change” button. [...]

62 Installation/Set up Viewing and Operation Recording Setting up Others Admin Settings Click “Configuration” on the left side of the “Camera Window” screen. • The Configuration menu appears on the left side of the screen. Click “Admin” on the left side of the screen. • The Admin setting screen appears on the right side of the displ[...]

63 Installation/Set up Viewing and Operation Recording Setting up Others Configure each item. ● Changing the Administrator ID and password 1) Enter the current login ID and the current pass word in “ Current Login ID ” and “ Current P assword, ” respectively . 2) Enter new login ID , new pass word and ne w password (confirm) in “ Ne w L[...]

64 Installation/Set up Viewing and Operation Recording Setting up Others Click “ Configuration ” on the left side of the “ Camera Window ” screen. • The Configuration menu appears on the left side of the screen. Click “ Alarm ” on the left side of the screen. • The Alarm setting screen appears on the r ight side of the display . Ala[...]

65 Installation/Set up Viewing and Operation Recording Setting up Others Setting the motion detection. ● Setting the motion detection 1) Select one of the f ollowings in “ Motion Detect: ” Enable : T o tur n motion detection on. Disable : T o tur n motion detection off. (Default: Disable) 2) Select the “ Sensitivity ” le vel from the pull[...]

66 Installation/Set up Viewing and Operation Recording Setting up Others Click “Configuration” on the left side of the “Camera Window” screen. • The Configuration menu appears on the left side of the screen. Click “Network” on the left side of the screen. • The Network setting screen appears on the right side of the display . Config[...]

67 Installation/Set up Viewing and Operation Recording Setting up Others ● Configuring the HTTP port number 1) Enter the HTTP por t number in “ HTTP P or t Number ” (def ault: 80). • F or most applications, select 80 (def ault: 80). 2) Click the “ Change ” button. ● DNS update to DNS 1/2 Server When you set a domain name (FQDN) f or t[...]

68 Installation/Set up Viewing and Operation Recording Setting up Others Click “ Configuration ” on the left side of the “ Camera Window ” screen. • The Configuration menu appears on the left side of the screen. Click “ Mail ” on the left side of the screen. • The Mail setting screen appears on the right side of the display . Mail S[...]

69 Installation/Set up Viewing and Operation Recording Setting up Others Configure each item. 1) Enter the IP address or the server name of the SMTP in “ Mail Server (SMTP). ” 2) Enter the authorization ID and passw ord of the POP3 ser ver in “ User ID ” and “ P assword ” of “ POP before SMTP . ” When you are not using the POP3 serv[...]

70 Installation/Set up Viewing and Operation Recording Setting up Others Click “ Configuration ” on the left side of the “ Camera Window ” screen. • The Configuration menu appears on the left side of the screen. Click “ FTP client ” on the left side of the screen. • The FTP client setting screen appears on the right side of the disp[...]

71 Installation/Set up Viewing and Operation Recording Setting up Others Click “ Configuration ” on the left side of the “ Camera Window ” screen. • The Configuration menu appears on the left side of the screen. Click “ DDNS ” on the left side of the screen. • The DDNS setting screen appears on the right side of the display . Config[...]

72 Installation/Set up Viewing and Operation Recording Setting up Others Click “Configuration” on the left side of the “Camera Window” screen. • The Configuration menu appears on the left side of the screen. Click “System” on the left side of the screen. • The System setting screen appears on the right side of the display . Updating[...]

73 Installation/Set up Viewing and Operation Recording Setting up Others Click “ Firmware update. ” • The Firmware update screen appears on the right side of the display . Click the “ Browse ” button. • A screen appears, allowing y ou to select a file. Select the file of the latest firmware you downloaded in the above “ Before Startin[...]

74 Installation/Set up Viewing and Operation Recording Setting up Others Click “ Configuration ” on the left side of the “ Camera Window ” screen. • The Configuration menu appears on the left side of the screen. Click “ System ” on the left side of the screen. • The System setting screen appears on the right side of the display . Cl[...]

75 Installation/Set up Viewing and Operation Recording Setting up Others Importing the Settings Saved on a Personal Computer Click “ Import new configurations ” on the System setting screen. • The Impor t new configuration screen appears on the right side of the displa y . Click the “ Browse ” button. • A screen appears, allowing y ou t[...]

76 Installation/Set up Viewing and Operation Recording Setting up Others[...]

Others ● Index (Glossary) ● Display of Logs ● Before Calling Service Personnel... ● Specifications ● Appearance Diagram[...]

78 Installation/Set up Viewing and Operation Recording Setting up Others Index (Glossary) A AC IN ........................................................ 6 Accessories ............... Safety Precautions3 Adjust the date and time ........................ 58 Administrator .......................................... 26 AES ............................[...]

79 Installation/Set up Viewing and Operation Recording Setting up Others H Hub ......................................................... 22 Wire gathering device used in10Base-T/ 100Base-TX network. Build up a network by connecting de vices around a hub radially . There are various por ts, like 8por t, 4por t. I IP address .........................[...]

80 Installation/Set up Viewing and Operation Recording Setting up Others Index (Glossary) (Cont.) Router ..................................................... 22 Device which rela ys data on a network to other network is called router . It decides by itself to which route to choose to forw ard the data by looking at IP address of network device . S[...]

81 Installation/Set up Viewing and Operation Recording Setting up Others Display of Logs Display Description System Boot Change Quality Change resolution Change Brightness Change Contrast Change Saturation Change Hue Set Flick erless Change Area(BLC) Camera Name Set Time T ype Set T ext Color Change Camera Time Set Daylight Sa ving Upload IPCamera [...]

82 Installation/Set up Viewing and Operation Recording Setting up Others Display of Logs (Cont.) Display Description Set DDNS Set Motion Record FTP down:re-connect FTP Client storage path isn't e xist FTP binary mode change fail Mail connect Mail connect fail Send e-mail finish NTP connect fail New client FTP fail to write image The DDNS setti[...]

83 Installation/Set up Viewing and Operation Recording Setting up Others Before Calling Service Personnel... There is no IP address of your network camera on The Camera Finder’s Network Camera List. Cannot display a browser from Camera Finder . The message, “The page cannot be display ed,” shows up , and cannot login to the camera e ven if yo[...]

84 Installation/Set up Viewing and Operation Recording Setting up Others Before Calling Service Personnel... (Cont.) Error message shows up when trying to login. Cannot access to the camera from the Internet. ● Entering wrong login ID and passw ord. ● CapsLock of the PC is ON. ● Y ou forget y our login ID and the passw ord. ● Default gate w[...]

85 Installation/Set up Viewing and Operation Recording Setting up Others Cannot perform settings. ● Lost the power of the camera during the performance. ● LAN cable of the camera has been pulled off during the performance. ● LAN cable of the PC has been pulled off during the performance. ● Lost the power of a hub or router during the perfor[...]

86 Installation/Set up Viewing and Operation Recording Setting up Others Before Calling Service Personnel... (Cont.) No images are display ed. The colors of images are poor . Cannot display images from the network camera. Renewal speed of network camera images is too slow . (P ar t 1) Renewal speed of network camera images is too slow . (P ar t 2) [...]

87 Installation/Set up Viewing and Operation Recording Setting up Others Colors of the images are poor . Focus of the images is poor . Cannot send mail. Cannot perform Auto Time Settings. Couldn ’ t complete firmware updating. ● Monitor color setting of your PC is set to 16 bit or less. ● The lens cov er of the camera is not clean, or some du[...]

88 Installation/Set up Viewing and Operation Recording Setting up Others Before Calling Service Personnel... (Cont.) Recorded images are not sav ed in FTP server . Pre-/post- recording files of the Alarm are not sent to the FTP server . Cannot solve the problems. ● FTP recording function is not set to ON. ● IP address of the FTP server , ID/ pa[...]

89 Installation/Set up Viewing and Operation Recording Setting up Others Others • When very strong light str ikes at the lens , you might see stripe patter ns (smear) on the images, b ut these are not malfunctions. If this happens, reinstall the camer a in another place, or try to change the direction of the lens. About PoE Power Supply Function [...]

90 Installation/Set up Viewing and Operation Recording Setting up Others Specifications IK-WR01A AC 24V ± 10% 60Hz/DC 12V ± 10%/ P oE 5.5w 1/3 inch CCD image area sensor 4.96mm (0.195inch) horizontal X 6.0mm (0.236inch) vertical (1/3inch type) 771 horizontal x 492 vertical V ari-focal Lens f: 3.0~8.0mm, F1.0 (Wide) / F1.45 (T ele): A uto Iris Wid[...]

91 Installation/Set up Viewing and Operation Recording Setting up Others Appearance Diagram φ 175 (6.89) 48.5 (1.91) 110 (4.33) 155 (6.10) unit : mm (inches) R45.5 (1.79)[...]

92 Installation/Set up Viewing and Operation Recording Setting up Others 61.5 (2.42) φ 170 (6.69) R45.5 (1.79) 147.5 (5.81) 150 (5.91) 41 (1.61) unit : mm (inches) Appearance Diagram (Cont.)[...]

93 Installation/Set up Viewing and Operation Recording Setting up Others 4-M4 46 (1.81) 120 (4.72) 83.5 (3.29) 120 (4.72) 110 60 4- φ 4.5 4- φ 6.5 unit : mm (inches) 4.4 (0.17) 46 (1.81) 83.5 (3.29) 85 (3.35) 85 (3.35) 7(0.28) 40(1.57) 15(0.59) 15(0.59) 40(1.57) 15(0.59) 15(0.59) 55(2.17) 5 20 82 114 4- φ 6.5 6- φ 5.5 φ 27 4-M6 Depth=10 ■ Br[...]

TOSHIBA AMERICA INFORMA TION SYSTEMS. INC Security & Network Video Products 9740 Ir vine Boulev ard, Ir vine Calif or nia 92618-1697 Phone Number : (877)696-3822[...]