THOMSON CS104 manual

EN Safety Information UK Plug Information CONNECT THE MAIN LEAD INTO A MAINS POWER SOCKET POWER SUPPL Y 230V . It must not be connected to D.C. mains. Note: The mains lead of the set is fitted with a moulded plug. If the mains socket are not compatible or if for any reason the plug is removed please follow the directions below . The moulded plug ca[...]

EN Safety Information CAUTION! Invisible laser radiation when open. Avoid exposure to beam. Class 1 laser product. This system must be opened only by qualified technicians to prevent accidents caused by the laser beam. LASER λ = 780 nm, P max = 5 mW Rating Information: At bottom/rear of the unit. This unit comply with the existing requirements CAU[...]

EN T able of Content Safety Information Getting Started .................................. 2 Unpacking Y our System ................................... 2 Installation ....................................................... 2 Connecting the Speakers ............................ 2 Using the Antenna ...................................... 2 General Con[...]

EN Getting Started 2 Unpacking Y our System Y ou should have: • One main unit (with 2 speakers); • One remote control; • One user’ s guide; • One Thomson Warranty Card Installation To ensure sufficient ventilation, keep the spacing shown as below: 10cm 10cm 10cm 10cm 5cm Connecting the Speakers When connecting the speakers, match the red [...]

EN General Contr ols 3 Front V iew ON•ECO – T urns on/off the unit. Remember to unplug the power cord from the power outlet if you are not going to use the system for some time. Press and hold to enter ECO mode. In ECO mode, the power consumption is below 3W . CD – Selects CD mode. TUNER/BAND•APP – Selects tuner mode; selects radio band i[...]

EN General Contr ols 4 ON•ECO - T urns the unit on/off EQ - Selects among different sound ef fects (flat / classic / rock / pop / jazz) REPEA T - In CD mode - toggles repeat options (repeat disc / repeat track / repeat off). MIX - Selects random playback in CD mode. CD - Selects CD player . X-BASS - Enable and disables X-Bass. INTRO - Selects Int[...]

EN Settings 5 Display Setting the Clock 1. Press CLOCK•TIMER to enter clock setting mode. CLK XX:XX will show on the display . 2. Press TUNING - or + to set the hour . 3. Press PROG•SET•CLEAR to shift to the minute digits. 4. Press TUNING - or + to set the minute. 5. Press PROG•SET•CLEAR to confirm the setting. Setting the Timer 1. Press [...]

EN Sound Featur es 6 Notes on CD-R/RW Notes on CD-R/RW Notes on CD-R/RW Notes on CD-R/RW Notes on CD-R/RW • Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning. • To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is b[...]

EN CD Player 7 Skipping T racks Press SKIP BACKWARD or SKIP FORWARD to skip to the previous or next track on the disc. Searching Thr ough a CD Press and hold SKIP BACKWARD or SKIP FORWARD to search through a CD while it is playing. Random Playback Press to turn on/off the playing of tracks in random order . (Remote Only) Sampling T racks Intro Play[...]

EN Radio 8 Selecting T uner Band • Press TUNER/BAND•APP on the main unit or TUNER on the remote control to select radio mode. • Select a radio band by pressing TUNER/ BAND•APP on the main unit or BAND/APP on the remote control: FM – Frequency Modulation (87.5 – 108 MHz) MW – Medium Wave (522 – 1620 KHz) LW – Long Wave (150 – 283[...]

EN Radio T uning to a RDS Station (FM only) 1. Press TUNING - or + on the main unit or SKIP BACKWARD or SKIP FORWARD on the remote control to select desired frequency or press PRESET + / - to access preset stations. 2. If RDS station is found, RDS lights on the display with station name shown. Displaying RDS station Information Press DISPLA Y on th[...]

EN T ape Player 10 Playing Cassette T ape 1. Press T APE to select tape mode. 2. Press on the OPEN/CLOSE area to open the deck door . 3. Load a cassette tape into the deck. Then, lightly press the deck door closed. •P ress PLA Y/P AUSE to start tape play . •P ress SKIP BACKWARD o r SKIP FORWARD to position the tape at the desired position. • [...]

EN Problem System will not turn on No sound Poor radio reception CD does not play Solution • Check power cord for a secure connection. • Unplug the unit for a moment, and then plug into power source again. • Check the outlet by plugging in another device. • Increase the volume setting. • Check connection to speakers. • Check that you ha[...]

EN Maintenance Disconnect the audio system from the power source before performing any maintenance. Cleaning Clean the exterior of the system using a soft dust cloth. CD Player CAUTION! This system operates with a laser . It must be opened by only a qualified technician. T ape Player To prevent deterioration of sound quality , periodically open the[...]

EN Safety Precautions • Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician. • Never operate this product with the cabinet removed. • Do not use your System immediately after transporting it from a cold place to a warm place, as condensation may cause the system to ma[...]