Symbol Technologies CXP854P60 manual

Description The CXP854P60 are a highly integrated micro- computers composed of a 8-bit CPU, PROM, RAM, and I/O ports. These chips feature many other high- performance circuits in a single-chip CMOS design, including an A/D converter, serial interface, timer/counter, time-base timer, vector interrupt, on- screen display function, I 2 C bus interface[...]

– 2 – CXP854P60 ON SCREEN DISPLAY SERIAL I/O TIMER/COUNTER REMOCON FIFO A/D CONVERTER I 2 C INTERFACE UNIT WATCH DOG TIMER 14BIT PWM 8 BIT PWM 8CH CLOCK GEN./ SYSTEM CONTROL RAM 960 BYTES SPC700 CPU CORE PROM 60K PRESCALER/ TIME BASE TIMER PORT A PORT B PORT C PORT D PORT E PORT F 2 2 V SS V DD MP RST XTAL EXTAL PD0/INT2 PE1/INT1 PE0/INT0 PF0/P[...]

– 3 – CXP854P60 HSYNC/PA7 VSYNC/PA6 PA5 PA4 PA3 PA2 PA1 PA0 PB7 PB6 PB5 PB4 PB3 PB2 PB1 PB0 PC7 PC6 PC5 PC4 PC3 PC2 PC1 PC0 EC/PD7 RMC/PD6 HS1/PD5 HS0/PD4 SI/PD3 SO/PD2 SCK/PD1 V SS V DD Vpp V SS MP PF0/PWM0 PF1/PWM1 PF2/PWM2 PF3/PWM3 PF4/PWM4/SCL0 PF5/PWM5/SCL1 PF6/PWM6/SDA0 PF7/PWM7/SDA1 YM YS I B G R EXLC XLC PE0/INT0 PE1/INT1 PE2/AN0 PE3/AN[...]

– 4 – CXP854P60 (Port A) Single bit selectable 8-bit port. (8 lines) (Port B) Single bit selectable 8-bit port. (8 lines) (Port C) Single bit selectable 8-bit port. (8 lines) (Port D) Single bit selectable 8-bit port. 12mA sink current drive possible. (8 lines) (Port E) 8-bit port, lower 6 bits for input, upper 2 bits for output. (8 lines) (Por[...]

– 5 – CXP854P60 Pin Name EXLC XLC EXTAL XTAL RST MP Vpp V DD Vss Input Output Input Output I/O Input CRT display clock oscillator I/O pin. Oscillator frequency is determined external L, C circuit. System clock oscillator crystal connection pin. When using an external clock, input to EXTAL pin and leave XTAL pin open. "L" level active [...]

– 6 – CXP854P60 Data bus RD (Port A, B, C) IP Input protection circuit Port A data Port B data Port C data Port A direction Port B direction Port C direction Data bus RD (Port A) IP Schmitt input Port A direction Port A data Input protection circuit Input multiplexer VSYNC HSYNC Data bus RD (Port D) IP Port D direction Port D data Large current[...]

– 7 – CXP854P60 Data bus RD (Port D) IP Port D direction Port D data Large current source 12mA Schmitt input SCK only SCK or SO Output enable IP RD (Port E) Data bus Schmitt input (To interrupt circuit) IP Input multiplexer To A/D converter RD (Port E) Data bus TO, PWM Port E selection Port E data Port D Port E 2 lines 2 lines 4 lines 2 lines P[...]

– 8 – CXP854P60 SCL, SDA Port F selection Port F data Large current source 12mA PWM I 2 C output enable IP Schmitt input SCL, SDA (To I 2 C circuit) To other I 2 C pins BUS SW PWM Port F selection Port F data 12V voltage torelance Large current source 12mA Port F Port F 4 lines 4 lines 6 lines 2 lines Pin When reset Circuit format PF4/PWM4/ SCL[...]

– 9 – CXP854P60 2 lines 1 line Pin When reset Circuit format RST Oscillation L level EXTAL XTAL IP EXTAL XTAL • Diagram indicates equivalent circuit during oscillation • Feedback resistor is disconnected during STOP Schmitt input Pull-up resistor From power-on reset circuit[...]

– 10 – CXP854P60 ∗ 1 V IN and V OUT should not exceed V DD + 0.3V. ∗ 2 The large current driver for the PD and PF ports is a N-ch transistor. Note) Usage exceeding absolute maximum ratings may permanently impair the LSI. Normal operation should better take place under the recommended operating conditions. Exceeding those conditions may adve[...]

– 11 – CXP854P60 V DD = 4.5V, I OH = – 0.5mA V DD = 4.5V, I OH = – 1.2mA V DD = 4.5V, I OL = 1.8mA V DD = 4.5V, I OL = 3.6mA V DD = 4.5V, I OL = 3.0mA V DD = 4.5V, I OL = 4.0mA V DD = 5.5V, V IH = 5.5V V DD = 5.5V, V IL = 0.4V V DD = 4.5V, I OL = 12.0mA High level output voltage Low level output voltage Input current I/O leakage current Ope[...]

– 12 – CXP854P60 AC Characteristics (1) Clock timing ∗ t sys indicates one of three values according to the contents of the clock control register. (For CPU clock selection.) t sys (ns) = 2000/fc (Upper 2 bits = "00"), 4000/fc (Upper 2 bits = "01"), 16000/fc (Upper 2 bits = "11") System clock frequency System clo[...]

– 13 – CXP854P60 (2) Serial transfer (Ta = – 10 to +75 ° C, V DD = 4.5 to 5.5V, Vss = 0V) Item SCK cycle time t KCY SCK Input mode Output mode SCK input mode SCK output mode SCK input mode SCK output mode SCK input mode SCK output mode SCK input mode SCK output mode 1000 8000/fc 400 4000/fc – 50 100 200 200 100 200 100 ns ns ns ns ns ns ns[...]

– 14 – CXP854P60 External interrupt high and low level widths Reset input low level width INT0 to INT2 RST 1 8/fc µs µs Item Symbol Pin Condition Min. Max. Unit t IH t IL t RSL Power supply rise time Power supply cutt-off time t R t OFF V DD Power-on reset Repeated power-on reset 0.05 1 50 ms ms Item Symbol Pin Condition Min. Max. Unit (3) In[...]

– 15 – CXP854P60 Resolution Linearity error Zero transition voltage Full-scale transition voltage Conversion time Sampling time Analog input voltage V ZT ∗ 1 V FT ∗ 2 t CONV t SAMP V IAN AN0 to AN3 Ta = 25 ° C V DD = 5.0V Vss = 0V – 10 4910 160/f ADC ∗ 3 12/f ADC ∗ 3 0 10 4970 8 ±1 70 5030 V DD Bits LSB mV mV µs µs V Item Symbol P[...]

– 16 – CXP854P60 (6) I 2 C bus timing (Ta = – 10 to +75 ° C, V DD = 4.5 to 5.5V, Vss = 0V) Item SCL clock frequency Bus free time before starting transfer Hold time for starting transfer Clock low level width Clock high level width Set-up time for repeated transfers Data hold time Data set-up time SDA, SCL rise time SDA, SCL fall time Set-up[...]

– 17 – CXP854P60 (7) OSD (On Screen Display) timing (Ta = – 10 to +75 ° C, V DD = 4.5 to 5.5V, Vss = 0V) Item OSD clock frequency HSYNC pulse width HSYNC afterwrite rise and fall times VSYNC afterwrite rise and fall times f OSC t HWD t HCG t VCG EXLC XLC HSYNC HSYNC VSYNC Fig. 12 Fig. 11 Fig. 11 Fig. 11 4 1.2 7 ∗ 1 14 ∗ 2 200 1.0 4 1.2 M[...]

– 18 – CXP854P60 Supplement Fig. 13. SPC700 Series recommended oscillation circuit EXTAL XTAL C 1 C 2 Rd (i) EXTAL XTAL C 1 C 2 Rd (ii) Manufacturer MURATA MFG CO., LTD. KINSEKI LTD. Model CSA4.00MG CSA4.19MG CSA8.00MTZ CST4.00MGW ∗ CST4.19MGW ∗ CST8.00MTW ∗ HC-49/U03 HC-49/U(-S) fc (MHz) 4.00 4.19 8.00 4.00 4.19 8.00 4.00 4.19 8.00 4.00 [...]

– 19 – CXP854P60 Fig. 14. Characteristics curves 23 1 45 6 0.1 10 15 1 0 8 6 4 2 0 100 10 0 L – Inductance [µH] Parameter Curve for OSD Oscillator L vs. C (Analytically calculated value) 50 100 C 1 , C 2 – Capacitance [pF] 5.0MHz 6.5MHz 13.0MHz V DD – Supply voltage [V] I DD – Supply current [mA] I DD vs. V DD (fc = 8MHz, Ta = 25 ° C,[...]

– 20 – CXP854P60 Package Outline Unit: mm 64PIN SDIP (PLASTI C) MIN 0.5 MIN 3.0 4.75 – 0.1 0.9 ± 0. 15 0.5 ± 0. 1 0.25 – 0.05 + 0.1 17.1 – 0.1 19.05 13 2 33 64 1.778 57.6 – 0.1 + 0.4 P A CKAGE MA TERIAL LEAD TREA TMENT LEAD MA TERIAL P ACKAGE MASS EPOXY RESIN 42/COPPER ALLO Y SONY CODE EIAJ CODE JEDEC CODE SDIP-64P-01 P-SDIP64-17.1x57[...]

– 21 – CXP854P60 Package Outline Unit: mm SONY CODE EIAJ CODE JEDEC CODE 23.9 ± 0.4 20.0 – 0.1 0.4 – 0.1 + 0.15 14.0 – 0.1 1 19 20 32 33 51 52 64 0.15 – 0.05 + 0.1 2.75 – 0.15 16.3 0.1 – 0.05 + 0.2 0.8 ± 0. 2 M 0.2 0.15 + 0.4 17.9 ± 0.4 + 0.4 + 0.35 64PIN QFP (PLASTIC) QFP-64P-L01 P-QFP64-14x20-1.0 P ACKAGE MA TERIAL LEAD TREA TM[...]