Speco Technologies HT-7246iHR manual

200 New Highway Amityville, NY 11701 631-957-8700 www .specotech.com HT-7246IHR 540 Line Color Dome Camera Intensifier Series Wall & Ceiling Mountable Please read this manual thoroughl y before operation and keep it handy for further reference.[...]

[...]

1 2 Contents Package Cont ents Operating Your Cam era Troubleshooting 3 35~36 * SET UP ---------------------------------- -------------- --------------13 * SET UP LENS------------------------------- -------------- ----------14 * SHUTTER SP EED CONTROL -------------------------------- -15~18 * BACK LIGHT----------------------------- -------------- -[...]

3 4  PACKAGE CONTENTS Please make sure that the fo llowing items are included in the package: 1 HT-7246IHR Camera 4 Mounting Scre ws 1 Chame leon Dome Cov er Please leave this manual w ith the en d-user f or fu ture reference. PRECAUTIONS  THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL  TO PREVENT A FIRE OR ELECTRICA L HA[...]

5 6 Connections: 1. When using 12-Volts DC (constan t voltage 600mA) -CONNECT POWER TO THE POWER JACK. 2. When using 24-Volts AC (40 VA) -CONNECT ACCESSORY CABLE TO THE POWER JACK AND CONNECT 24V AC TO THE LEAD. 3. CONNECT VIDEO CABLE -CONNECT BNC CABLE TO THE BNC JACK. CAMERA INSTALLATION connect CE N T E R: ( + ) PO W ER I NPUT :R ED AC 24V conne[...]

7 8 INTERNAL COMPONENTS 1. Mechanical (1) DC AUTO-IRIS LENS Adjust between T ÅÆ W (TELE ÅÆ WIDE) to set the angle (focal length) Set the focus b y adjusting ∞ ÅÆ N NOTE: BOTH OF THE ABOVE A DJUSTMENTS GET LOCKED INTO POSITION THROUGH TH E USE OF "LOCKING HANDLES". (2) JOY STICK TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY ST[...]

Features ♣ SLC When the image is in front of strong background lig hting, your camera allo ws you to get a properly balanced im age. ♣ INTE NSIFIER 1/3 inch high density CCD a nd digital processor permit high quality pictures to be captured in very lo w light conditions. ♣ High Reso lution Horizontal resolution of 540 TV lines is achieved by [...]

◈ OSD Function 11 Operating your camera SET UP MENU  Push the Joy s tick for one second, and the OSD appears on the screen. Move the Joy Stick up, down, left & right to control the OSD functions. LENS OP TION ● DC ● MANUAL SHUTTER ● OFF ● F/L ● MANUAL WHITE BALANCE ● ATW ● AWC MANUAL ● SLC – ( Speco Light Compensa tion ) [...]

Operating your camera - SET UP Operating your camera - LENS 1. Press the SET button (JOYSTICK) to access the SETUP mode. ● SETUP menu is displaye d on the monitor screen. 2. Select the desired feature using the UP or DOWN button. ● Each time you press the UP or DOWN button, the arrow indicator moves up or down. ● Move the arrow indicator to t[...]

Operating your camera – SHUTTER SPEED CONTROL ① ▶ When DC LENS is selected, press the SET button To control the BRIGHTNESS. ● AUOT IRIS LENS (DC TYPE) is recommended Notes 15 16 2) Shutter status and speed control You can control brightness of the screen by the shutter speed. ① Press the SET button to display the setup menu and move the a[...]

Operating your camera – SHUTTER SPEED CONTROL ② ▶ MANUAL : When setting the shutter speed manually, You can select a speed from ‘1/60’ to ‘1/200,000’sec 17 18 ▶ ELC : You can control the BRIGHTNESS. ③ When completed, press ‘SET’ ● Avoid pointing the camera directly at a fluorescent lamp. ● When the SHUTTER menu is set to F[...]

Operating your camera - BACKLIGHT 19 20 ▶ HIGH ▶ MIDDLE ▶ LOW ▶ OFF 4) AUTO GAIN (AGC) AGC allows a brighter picture in low light conditions. Highe r GAIN level will yield a brighter screen, bu t you might notice an increase in nois e. ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘AGC’ using the UP [...]

Operating your camera - WHITE BALANCE 21 22 5) WHITE BALANCE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘WHITE BALANCE’ using t he UP or DOWN button. ② Set ‘WHITE BAL.’ to the desired mode using LEFT or RIGHT button. ● Proper White Balance may not be obtain ed under the follo wing conditions. In t[...]

Operating your camera - INTENSIFIER Operating your camera - INTENSIFIER 23 24 6) REDUCE NOISE (Dynamic Noise Reduct ion) DNR reduces the video noise on the screen. ① Press the SET button to display the SETUP menu and move the arrow to ‘REDUCE NOISE’ using the UP or DOWN button. ② SET ‘REDUCE NOISE’ to the desired mode usin g the LEFT or[...]

Operating your camera - CAMERA TITLE ② Operating your camera - CAMERA TITLE ① 8) NEXT PAGE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘NEXT PAGE’ using the UP or DOW N button. ② SET ‘NEXT PAGE’ to the desired mode using the LEF T or RIGHT button. (1) CAMERA TITLE ① Press the SET button to disp[...]

Operating your camera – DAY/NIGHT/SYNC (2) COLOR : You can choose color and B/W mode electronicall y. ① Press the SET button to display the setup menu and move the arro w indicator to ‘COLOR’ using the UP and DOWN button. ② SET ‘COLOR’ to the desired mode us ing the LEFT or RIGHT button. ▶ COLOR : The camera will always display a co[...]

Operating your camera – MOTION DETECTION (4) Whenever your camera detects motion, THE WORDS “motion detecte d’ will appear on the screen. ① Press the SET button to display the setup menu and move the arro w indicator to ‘MOTION’ using the UP and DOWN button. ② SET ‘MOTION’ to the desired mode us ing the LEFT or RIGHT button. ▶ O[...]

Operating your camera - PRIVACY Operating your camera - REVERSE (5) PRIVACY : To mask area that you want to be private. ① Press the SET button to display the setup menu and move the arro w to ‘PRIVACY’ using the UP and DOWN button. ② SET ‘PRIVACY’ to the desired mode using the LEFT or RIGHT button. ▶ OFF : Deactivation ▶ ON : PRIVAC[...]

Operating your camera - DETAIL Operating your camera - RESET/RETURN 33 34 (7) DETAIL ① Press the SET button to display the setup menu and move the arro w indicator to ‘DETAIL’ using the UP and DOWN button. ② SET ‘DETAIL’ t o the desired mode us ing the LEFT or RIGHT button. ▶ OFF : Deactivation ▶ ON : DETAIL control mode (level 0~31[...]

Troubleshooting 35 36 ● Have you set ‘MOTIO N DET.’ me nu to off? ● Have y ou set ‘MD L EVEL’ to too low? ● Have you s et ‘MD ARAEA’ properly MOTION DETEC TION function is not acti ve. ● Check that you ha ve properly connected the camer a to an appropr iate power source. The camer a is not working prop erly. ● Adjust the contr[...]

SPECIFICATIONS 38 - 29 ℃ ~ +5 0 ℃ ( -20 ℉ ~122 ℉ ) Operational Temperature ON / OFF (4 Programmable Zone) PRIVACY Functio n Built - in On Sc reen Displa y ( O .S. D ) MD1 / MD2 / OFF Motion Detecti on 50dB (Weight On) S/N ( Y signal) ON / LOW / MIDDLE / HIGH REDUCE N OI SE W-ATW / S-ATW / AWC / MANUA L WHITE BALA NCE 0.002Lux (intensifier) [...]

39 WARRANTY[...]